Search Constraints
Number of results to display per page
Results for:
Language
English
Remove constraint Language: English
« Previous |
1 - 10 of 533
|
Next »
Search Results
-
Video
The lecture commenced with a warm welcome and introduction of the speaker by Prof. CHEN Qingyan, Director of PAIR. Prof. McCulloch kickstarted his presentation by giving a brief overview of the current molecular designs of organic semiconductor polymers for charge transport. He explained how they enable organic thin film transistors to achieve high charge carrier mobility and their applications in flexible screens and other electronic devices. He then elaborated on the molecular characteristics of the indacenodithiophene-co-benzothiadiazole copolymer, a semiconductor polymer that exhibits high carrier mobility and is commonly used in organic transistors.
Prof. McCulloch also emphasised the importance of “conformational coplanarity” and “side chain assisted self-assembly”. These features help enhance one-dimensional transport along the “conjugated polymer backbone” and form sterically free “crossing points”, allowing charges to hop between chains. He further highlighted that current research has shown that the molecular conformation and film microstructure are influenced by the design and processing conditions of organic semiconductor polymers, and these significant findings can help achieve optimal charge transport properties.
Following the presentation was a question-and-answer session moderated by Prof. YAN Feng, Associate Director of the Research Institute for Intelligent Wearable Systems (RI-IWEAR) and Chair Professor of Organic Electronics in the Department of Applied Physics. The audience engaged in a productive discussion with Prof. McCulloch.
Event date: 14/01/2025
Speaker: Prof. Iain McCULLOCH (Princeton University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Chemistry
- Keywords:
- Organic semiconductors Polymers Charge transfer
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome and brief speaker introduction by Prof. CHEN Qingyan, Director of PAIR. Prof. Russell kickstarted his presentation by giving a brief overview of the historical development of photonic crystal fibre (PCF), highlighting how advancements in optical fibres, Bragg scattering, photonic bandgaps and drawing towers laid the foundation for PCF breakthroughs. Prof. Russell shared that he proposed in 1991 a glass fibre with a periodic array of microscopic hollow channels running along its length might guide light in novel ways, and many PCFs emerged from drawing towers at universities in subsequent years. Next, he elaborated on the advantages of PCF, explaining how it offers enhanced control over the propagation light, and how this property has enabled valuable applications. He shared his research in light-guiding PCF, hollow core PCF filled with gas, and twisted PCF, reviewing how some of the scientific discoveries made possible by PCF have evolved into real-world applications.
Event date: 05/11/2024
Speaker: Prof. Philip RUSSELL
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Physics
- Keywords:
- Fiber optics Optical fibers Optical communications
- Resource Type:
- Video
-
Video
A rapidly expanding research area involves the development of routes to shape programmable three-dimensional (3D) structures with feature sizes in the mesoscopic range (that is, between tens of nanometres and hundreds of micrometres). A goal is to establish methods to control the properties of materials systems and the function of devices, through not only static architectures, but also morphable structures and shape-shifting processes. Soft matter equipped with responsive components can switch between designed shapes, but cannot support the types of dynamic morphing capabilities needed to reproduce continuous shape-shifting processes of interest for many applications. Challenges lie in the establishment of 3D assembly/fabrication techniques compatible with wide classes of materials and 3D geometries, and schemes to program target shapes after fabrication.
In this talk, Prof. HUANG Yonggang will introduce a mechanics-guided assembly approach that exploits controlled buckling for constructing complex 3D micro/nanostructures from patterned two-dimensional (2D) micro/nanoscale precursors that can be easily formed using established semiconductor technologies. This approach applies to a very broad set of materials (e.g., semiconductors, polymers, metals, and ceramics) and even their heterogeneous integration, over a wide range of length scales (e.g., from 100 nm to 10 cm). To allow realisation of 3D mesostructures that are capable of qualitative shape reconfiguration, Prof. HUANG devises a loading-path controlled strategy that relies on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear buckling. Prof. HUANG will also introduce a recent work on shape programmable soft surface, constructed from a matrix of filamentary metal traces, driven by programmable, distributed electromagnetic forces that follow from the passage of electrical currents in the presence of a static magnetic field. Under the guidance of a mechanics model-based strategy to solve the inverse problem, the surface can morph into a wide range of 3D target shapes and shape-shifting processes. The compatibility of these approaches with the state-of-the-art fabrication/processing techniques, along with the versatile capabilities, allow transformation of diverse existing 2D microsystems into complex configurations, providing unusual design options in the development of novel functional devices.
Event date: 08/08/2024
Speaker: Prof. HUANG Yonggang (Northwestern University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Buckling (Mechanics) Materials science Elastomers Microstructure
- Resource Type:
- Video
-
Video
The seminar commenced with a welcome speech and speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. This was followed by Prof. Leng’s presentation. He first provided a brief background about shape memory polymers (SMP), pointing out that these smart materials can reversibly change between permanent and temporary shapes in response to changes in external stimuli such as temperature. Next, he gave an overview of the researchers from different scientific research institutions and universities around the world who specialise in SMP research, and the types of SMP materials that HIT researchers focus on. He said that SMP are hard to actuate and their recovery strength and speed are low, and so relevant solutions to these challenges are important for the development of SMP composites (SMPC). Prof. Leng then gave examples demonstrating how SMPC can be prepared through actuation methods involving different stimuli such as heat, electricity, magnetism, radio frequency, solution/water, light, etc. He mentioned that SMPC can be used to prepare various structures for aerospace, smart manufacturing, photoelectric applications, microelectromechanical systems applications, and smart clothing. After that, Prof. Leng introduced 4D printing, a novel additive manufacturing process for producing printed objects that can adaptively change their configurations/properties in response to external stimuli. He mentioned that 4D printing is important for producing a range of SMPC-based materials for biomedical applications. To conclude, Prof. Leng said that SMP research is a fast-growing emerging research field. He anticipated that shape memory smart structures incorporated with sensors, actuators, and controllers, would be widely used in aerospace, civil aviation, automotive, energy and daily life.
Event date: 15/07/2024
Speaker: Prof. LENG Jinsong
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Additive manufacturing Shape memory polymers Smart materials Polymeric composites
- Resource Type:
- Video
-
Video
The lecture commenced with a welcome speech and speaker introduction by Prof. CHEN Qingyan, Director of PAIR, followed by a presentation by Prof. Cui. He first shared his scientific journey by reminiscing about the old days when he moved abroad to develop an academic career after graduating in China and gradually became a highly successful scientist. Next, he explained the importance of interdisciplinary research and shared how the combination of medical science and engineering enables the development of health technologies such as imaging, keyhole surgery, in vitro diagnostics, in vitro fertilisation, etc. Prof. Cui emphasised that scientists are to “discover” and find out “how a thing happens” whereas engineers are to “create” and “make things happen”. He then gave some advice on how to do well in interdisciplinary research and shared some innovations in microbioreactor and point-of-care testing developed by him and his team which has achieved great success in research commercialisation and made significant contributions to drug discovery and public health. To conclude, Prof. Cui shared that scientific success is based on many factors, including team, facilities, timing, luck, etc., and encouraged the next generation of engineers and scientists to consider a career in biomedical engineering, an exciting and rewarding domain.
Following the lecture, a lively and insightful question-and-answer session was moderated by Ir Prof. ZHANG Ming, Director of the Research Institute for Sports Science and Technology (RISports), Head of the Department of Biomedical Engineering and Chair Professor of Biomechanics. The audience had fruitful discussions with Prof. Cui.
Event date: 23/04/2024
Speaker: Prof. Zhanfeng CUI (University of Oxford)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Interdisciplinary research Interdisciplinary approach in education
- Resource Type:
- Video
-
Video
The lecture commenced with a welcome speech and speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation). In his presentation, Prof. Chen first gave a brief introduction to the United Nations’ 17 Sustainable Development Goals (SDGs) as well as the SDG monitoring practices in Mainland China. He pointed out that the Nation has adopted the high quality sustainable development concept, which emphasises harmonising the social, economic and environmental aspects in national development. Next, he elaborated on a pilot project that he led to measure Deqing County’s progress towards SDGs using geospatial and statistical information. The project was selected by the UN Department of Economic and Social Affairs as one of the first 16 good SDGs’ practices in 2020. After that, Prof. Chen shared that the achievement of sustainable development requires holistic and systematic research to build a digital governance system that can provide the basis for the scientific and orderly development of national territorial space. He also explained how territorial space sustainability studies can help unveil and analyse various patterns, such as the distributions of population, enterprises and public service facilities, and the relationships between them. To conclude, Prof. Chen introduced the national program on the development of the Realistic Geospatial Landscape Model (3dRGLm), which can generate digital description and representation of the real 3D geospatial spaces. This new geographic information system can support the Nation in achieving natural resources management and high quality sustainable development.
A question-and-answer session moderated by Prof. DING Xiaoli, Director of the Research Institute for Land and Space (RILS) and Prof. WENG Qihao, Associate Director of RILS, followed. The online and on-site audience engaged in a productive discussion with Prof. Chen.
Event date: 27/03/2024
Speaker: Prof. Jun CHEN (National Geomatics Center of China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Sustainable development Geospatial data China Sustainable Development Goals Geographic information systems
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome address by Prof. CHEN Qingyan, Director of PAIR, followed by a brief speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. In his presentation, Prof. Yang highlighted that urgent need for tissue/organ biomanufacturing owing to the shortage of donation for organ transplantation. He pointed out some challenges in the in vitro manufacturing of tissues/organs, particularly in relation to accurate design, precise fabrication, and functional induction, which underscore the imperative need for new methods for tissue/organ manufacturing. Next, Prof. Yang outlined the development roadmap of biomanufacturing and shared specific examples demonstrating the research progress in 3D bioprinting. In concluding his presentation, Prof. Yang shared his insights on the future direction for biomanufacturing, as well as some significant accomplishments by him and his team at Zhejiang University in the field.
A question-and-answer session moderated by Prof. Wang was followed. Both the online and on-site audience had a fruitful discussion with Prof. Yang.
Event date: 2/1/2024
Speaker: Prof. Huayong Yang (Zhejiang University)
Moderator: Prof. Zuankai Wang (Hong Kong Polytechnic University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Biomedical Engineering and Biology
- Keywords:
- Biomedical engineering Tissue engineering Regenerative medicine Three-dimensional printing
- Resource Type:
- Video
-
Video
Water shortage is one of the biggest challenges that humanity faces. Novel technologies to tackle the challenge of water scarcity are urgently needed. However, all the existing studies are based on bare fibers with diameter in the order of mm. This talk introduces a novel fog collection technology using microfibers fabricated by near-field electrospinning. The collection efficiency reaches a record high level. Systematic investigation reveals that the waterdrops are “visible” to fog droplets in the incoming air flow because of the relatively small size of the microfibers. Thus, the large waterdrops deflect the fog-carrying airflow to the satellite small waterdrops, which effectively intercept the fog droplets.
Event Date: 12/10/2023
Speaker: Prof. TAN Zhongchao (Founding Chair Professor, Vice Provost and Dean of Academic Affairs of the Eastern Institute of Technology in Ningbo, China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Environmental Sciences and Mechanical Engineering
- Keywords:
- Fog Hydrology Water harvesting Water-supply
- Resource Type:
- Video
-
Video
In the presentation, Prof. Chan shared Singapore’s long-term energy plan and research focus, as well as a few major initiatives on hydrogen application. He then introduced turquoise hydrogen and the catalytic decomposition of methane for hydrogen production, followed by an overview of the research activities on hydrogen and fuel cells at NTU over the last 30 years.
Event Date: 13/6/2023
Speaker: Prof. CHAN Siew Hwa (Nanyang Technological University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Electrical Engineering
- Keywords:
- Clean energy Hydrogen as fuel
- Resource Type:
- Video
-
Video
Models arising in biology are often written in terms of Ordinary Differential Equations. The celebrated paper of Kermack-McKendrick (19271, founding mathematical epidemiology, showed the necessity to include parameters in order to describe the state of the individuals, as time elapsed after infection. During the 70s, many mathematical studies were developed when equations are structured by age, size, more generally a physiological trait. The renewal, growth-fragmentation are the more standard equations. The talk will present structured equations, show that a universal generalized relative entropy structure is available in the linear case, which imposes relaxation to a steady state under non-degeneracy conditions. In the nonlinear cases, it might be that periodic solutions occur, which can be interpreted in biological terms, e.g., as network activity in the neuroscience. When the equations are conservation laws, a variant of the Monge-Kantorovich distance (called Fortet-Mourier distance) also gives a general non-expansion property of solutions.
Event date: 19/1/2023
Speaker: Prof. Benoît Perthame (Sorbonne University)
Hosted by: Department of Applied Mathematics
- Subjects:
- Mathematics and Statistics and Biology
- Keywords:
- Biomathematics Equations
- Resource Type:
- Video