Search Constraints
Number of results to display per page
Results for:
« Previous |
1 - 20 of 554
|
Next »
Search Results
-
Video
The lecture commenced with a warm welcome and a brief introduction of the speaker by Prof. CHEN Qingyan, Director of PAIR. Prof. Zheng kickstarted his presentation by outlining the key driving forces of innovation and technologies. He shared that achieving success in the “from zero to one” and the subsequent “from one to N” innovation stages often come with the inevitable “valley of death” period, which spans over a decade. He then elaborated on how he and his team have spent 20 years of relentless effort overcoming the “valleys of death” in studying structural superlubricity, building a model for talent development, and entering into the next “one-to-N” development phase. Prof. Zheng also shared the key turning points in his academic and research journey and outlined how the X-Institute nurtures interdisciplinary research talents.
Event date: 21/11/2024
Speaker: Prof. ZHENG Quanshui (Academician of the Chinese Academy of Sciences, Founding Principal of X-Institute and Professor of Tsinghua Shenzhen International Graduate School, China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Scientists Technological innovations
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome and brief speaker introduction by Prof. CHEN Qingyan, Director of PAIR. Prof. Russell kickstarted his presentation by giving a brief overview of the historical development of photonic crystal fibre (PCF), highlighting how advancements in optical fibres, Bragg scattering, photonic bandgaps and drawing towers laid the foundation for PCF breakthroughs. Prof. Russell shared that he proposed in 1991 a glass fibre with a periodic array of microscopic hollow channels running along its length might guide light in novel ways, and many PCFs emerged from drawing towers at universities in subsequent years. Next, he elaborated on the advantages of PCF, explaining how it offers enhanced control over the propagation light, and how this property has enabled valuable applications. He shared his research in light-guiding PCF, hollow core PCF filled with gas, and twisted PCF, reviewing how some of the scientific discoveries made possible by PCF have evolved into real-world applications.
Event date: 05/11/2024
Speaker: Prof. Philip RUSSELL
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Physics
- Keywords:
- Optical fibers Optical communications Fiber optics
- Resource Type:
- Video
-
Video
A rapidly expanding research area involves the development of routes to shape programmable three-dimensional (3D) structures with feature sizes in the mesoscopic range (that is, between tens of nanometres and hundreds of micrometres). A goal is to establish methods to control the properties of materials systems and the function of devices, through not only static architectures, but also morphable structures and shape-shifting processes. Soft matter equipped with responsive components can switch between designed shapes, but cannot support the types of dynamic morphing capabilities needed to reproduce continuous shape-shifting processes of interest for many applications. Challenges lie in the establishment of 3D assembly/fabrication techniques compatible with wide classes of materials and 3D geometries, and schemes to program target shapes after fabrication.
In this talk, Prof. HUANG Yonggang will introduce a mechanics-guided assembly approach that exploits controlled buckling for constructing complex 3D micro/nanostructures from patterned two-dimensional (2D) micro/nanoscale precursors that can be easily formed using established semiconductor technologies. This approach applies to a very broad set of materials (e.g., semiconductors, polymers, metals, and ceramics) and even their heterogeneous integration, over a wide range of length scales (e.g., from 100 nm to 10 cm). To allow realisation of 3D mesostructures that are capable of qualitative shape reconfiguration, Prof. HUANG devises a loading-path controlled strategy that relies on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear buckling. Prof. HUANG will also introduce a recent work on shape programmable soft surface, constructed from a matrix of filamentary metal traces, driven by programmable, distributed electromagnetic forces that follow from the passage of electrical currents in the presence of a static magnetic field. Under the guidance of a mechanics model-based strategy to solve the inverse problem, the surface can morph into a wide range of 3D target shapes and shape-shifting processes. The compatibility of these approaches with the state-of-the-art fabrication/processing techniques, along with the versatile capabilities, allow transformation of diverse existing 2D microsystems into complex configurations, providing unusual design options in the development of novel functional devices.
Event date: 08/08/2024
Speaker: Prof. HUANG Yonggang (Northwestern University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Buckling (Mechanics) Materials science Elastomers Microstructure
- Resource Type:
- Video
-
Video
The seminar commenced with a welcome speech and speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. This was followed by Prof. Leng’s presentation. He first provided a brief background about shape memory polymers (SMP), pointing out that these smart materials can reversibly change between permanent and temporary shapes in response to changes in external stimuli such as temperature. Next, he gave an overview of the researchers from different scientific research institutions and universities around the world who specialise in SMP research, and the types of SMP materials that HIT researchers focus on. He said that SMP are hard to actuate and their recovery strength and speed are low, and so relevant solutions to these challenges are important for the development of SMP composites (SMPC). Prof. Leng then gave examples demonstrating how SMPC can be prepared through actuation methods involving different stimuli such as heat, electricity, magnetism, radio frequency, solution/water, light, etc. He mentioned that SMPC can be used to prepare various structures for aerospace, smart manufacturing, photoelectric applications, microelectromechanical systems applications, and smart clothing. After that, Prof. Leng introduced 4D printing, a novel additive manufacturing process for producing printed objects that can adaptively change their configurations/properties in response to external stimuli. He mentioned that 4D printing is important for producing a range of SMPC-based materials for biomedical applications. To conclude, Prof. Leng said that SMP research is a fast-growing emerging research field. He anticipated that shape memory smart structures incorporated with sensors, actuators, and controllers, would be widely used in aerospace, civil aviation, automotive, energy and daily life.
Event date: 15/07/2024
Speaker: Prof. LENG Jinsong
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Additive manufacturing Shape memory polymers Smart materials Polymeric composites
- Resource Type:
- Video
-
Video
The lecture commenced with a welcome speech and speaker introduction by Prof. CHEN Qingyan, Director of PAIR, followed by a presentation by Prof. Cui. He first shared his scientific journey by reminiscing about the old days when he moved abroad to develop an academic career after graduating in China and gradually became a highly successful scientist. Next, he explained the importance of interdisciplinary research and shared how the combination of medical science and engineering enables the development of health technologies such as imaging, keyhole surgery, in vitro diagnostics, in vitro fertilisation, etc. Prof. Cui emphasised that scientists are to “discover” and find out “how a thing happens” whereas engineers are to “create” and “make things happen”. He then gave some advice on how to do well in interdisciplinary research and shared some innovations in microbioreactor and point-of-care testing developed by him and his team which has achieved great success in research commercialisation and made significant contributions to drug discovery and public health. To conclude, Prof. Cui shared that scientific success is based on many factors, including team, facilities, timing, luck, etc., and encouraged the next generation of engineers and scientists to consider a career in biomedical engineering, an exciting and rewarding domain.
Following the lecture, a lively and insightful question-and-answer session was moderated by Ir Prof. ZHANG Ming, Director of the Research Institute for Sports Science and Technology (RISports), Head of the Department of Biomedical Engineering and Chair Professor of Biomechanics. The audience had fruitful discussions with Prof. Cui.
Event date: 23/04/2024
Speaker: Prof. Zhanfeng CUI (University of Oxford)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Interdisciplinary research Interdisciplinary approach in education
- Resource Type:
- Video
-
Video
The lecture commenced with a welcome speech and speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation). In his presentation, Prof. Chen first gave a brief introduction to the United Nations’ 17 Sustainable Development Goals (SDGs) as well as the SDG monitoring practices in Mainland China. He pointed out that the Nation has adopted the high quality sustainable development concept, which emphasises harmonising the social, economic and environmental aspects in national development. Next, he elaborated on a pilot project that he led to measure Deqing County’s progress towards SDGs using geospatial and statistical information. The project was selected by the UN Department of Economic and Social Affairs as one of the first 16 good SDGs’ practices in 2020. After that, Prof. Chen shared that the achievement of sustainable development requires holistic and systematic research to build a digital governance system that can provide the basis for the scientific and orderly development of national territorial space. He also explained how territorial space sustainability studies can help unveil and analyse various patterns, such as the distributions of population, enterprises and public service facilities, and the relationships between them. To conclude, Prof. Chen introduced the national program on the development of the Realistic Geospatial Landscape Model (3dRGLm), which can generate digital description and representation of the real 3D geospatial spaces. This new geographic information system can support the Nation in achieving natural resources management and high quality sustainable development.
A question-and-answer session moderated by Prof. DING Xiaoli, Director of the Research Institute for Land and Space (RILS) and Prof. WENG Qihao, Associate Director of RILS, followed. The online and on-site audience engaged in a productive discussion with Prof. Chen.
Event date: 27/03/2024
Speaker: Prof. Jun CHEN (National Geomatics Center of China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Sustainable development Geospatial data China Sustainable Development Goals Geographic information systems
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome address by Prof. CHEN Qingyan, Director of PAIR, followed by a brief speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. In his presentation, Prof. Yang highlighted that urgent need for tissue/organ biomanufacturing owing to the shortage of donation for organ transplantation. He pointed out some challenges in the in vitro manufacturing of tissues/organs, particularly in relation to accurate design, precise fabrication, and functional induction, which underscore the imperative need for new methods for tissue/organ manufacturing. Next, Prof. Yang outlined the development roadmap of biomanufacturing and shared specific examples demonstrating the research progress in 3D bioprinting. In concluding his presentation, Prof. Yang shared his insights on the future direction for biomanufacturing, as well as some significant accomplishments by him and his team at Zhejiang University in the field.
A question-and-answer session moderated by Prof. Wang was followed. Both the online and on-site audience had a fruitful discussion with Prof. Yang.
Event date: 2/1/2024
Speaker: Prof. Huayong Yang (Zhejiang University)
Moderator: Prof. Zuankai Wang (Hong Kong Polytechnic University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Biomedical Engineering and Biology
- Keywords:
- Biomedical engineering Tissue engineering Regenerative medicine Three-dimensional printing
- Resource Type:
- Video
-
Video
Water shortage is one of the biggest challenges that humanity faces. Novel technologies to tackle the challenge of water scarcity are urgently needed. However, all the existing studies are based on bare fibers with diameter in the order of mm. This talk introduces a novel fog collection technology using microfibers fabricated by near-field electrospinning. The collection efficiency reaches a record high level. Systematic investigation reveals that the waterdrops are “visible” to fog droplets in the incoming air flow because of the relatively small size of the microfibers. Thus, the large waterdrops deflect the fog-carrying airflow to the satellite small waterdrops, which effectively intercept the fog droplets.
Event Date: 12/10/2023
Speaker: Prof. TAN Zhongchao (Founding Chair Professor, Vice Provost and Dean of Academic Affairs of the Eastern Institute of Technology in Ningbo, China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Environmental Sciences and Mechanical Engineering
- Keywords:
- Fog Hydrology Water harvesting Water-supply
- Resource Type:
- Video
-
Video
In the presentation, Prof. Chan shared Singapore’s long-term energy plan and research focus, as well as a few major initiatives on hydrogen application. He then introduced turquoise hydrogen and the catalytic decomposition of methane for hydrogen production, followed by an overview of the research activities on hydrogen and fuel cells at NTU over the last 30 years.
Event Date: 13/6/2023
Speaker: Prof. CHAN Siew Hwa (Nanyang Technological University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Electrical Engineering
- Keywords:
- Clean energy Hydrogen as fuel
- Resource Type:
- Video
-
Video
香港理工大學高等研究院於2023年4月21日成功舉辦以「綠色化工與分子篩催化」為題的公開講座（混合模式）。講座由中國工程院院士、中國石化上海石油化工研究院院長楊為民教授主講，吸引了來自亞洲、歐洲、北美10多個國家和地區的120多名現場及網上參加者。講座亦在嗶哩嗶哩、微博等多個社交媒體平台進行直播，在線觀看人數超過11,000人次。
講座由理大協理副校長（研究與創新）王鑽開教授以歡迎辭及講者介紹揭開序幕。楊教授介紹了其團隊在綠色化工領域的研究進展，包括基於分子篩催化材料的綠色化工技術開發與實踐，以及新型分子篩催化材料的應用，並分享了他對行業未來趨勢的展望。 隨後的問答環節由應用物理系客座教授曾適之教授主持，一眾參加者與楊教授進行了富有成果的交流。
- Subjects:
- Chemistry
- Keywords:
- Zeolites Catalysis Zeolite catalysts Green chemistry
- Resource Type:
- Video
-
Video
Models arising in biology are often written in terms of Ordinary Differential Equations. The celebrated paper of Kermack-McKendrick (19271, founding mathematical epidemiology, showed the necessity to include parameters in order to describe the state of the individuals, as time elapsed after infection. During the 70s, many mathematical studies were developed when equations are structured by age, size, more generally a physiological trait. The renewal, growth-fragmentation are the more standard equations. The talk will present structured equations, show that a universal generalized relative entropy structure is available in the linear case, which imposes relaxation to a steady state under non-degeneracy conditions. In the nonlinear cases, it might be that periodic solutions occur, which can be interpreted in biological terms, e.g., as network activity in the neuroscience. When the equations are conservation laws, a variant of the Monge-Kantorovich distance (called Fortet-Mourier distance) also gives a general non-expansion property of solutions.
Event date: 19/1/2023
Speaker: Prof. Benoît Perthame (Sorbonne University)
Hosted by: Department of Applied Mathematics
- Subjects:
- Mathematics and Statistics and Biology
- Keywords:
- Biomathematics Equations
- Resource Type:
- Video
-
Video
Universities conduct research for three reasons: to educate students, to contribute to society, and to understand the world. While society often holds a view of the scholar as a solitary and singular genius, in reality scholars today participate in a highly collaborative, worldwide search for shared understandings that stand the test of time and the scrutiny of others. The problems in the 21st century often demand effort by teams of researchers with resources at scale: laboratories and equipment, compute resources, and expert staffing. Working with faculty, students, and other stakeholders to identify the greatest opportunities and the resources needed to address them is both a privilege and a challenge for modern academic administrators. In this talk, I will share three examples: fostering collaborative proposal-writing; planning for shared capabilities in experimental facilities, data, and computation; and transforming academic structures.
Event date: 12/4/2023
Speaker: Prof. Kathryn Ann Moler
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Statistics and Research Methods
- Keywords:
- Research Science
- Resource Type:
- Video
-
Video
More than one hundred years ago, Albert Einstein published his Theory of General Relativity (GR). One year later, Karl Schwarzschild solved the GR equations for a non-rotating, spherical mass distribution; if this mass is sufficiently compact, even light cannot escape from within the so-called event horizon, and there is a mass singularity at the center. The theoretical concept of a 'black hole' was born, and was refined in the next decades by work of Penrose, Wheeler, Kerr, Hawking and many others. First indirect evidence for the existence of such black holes in our Universe came from observations of compact X-ray binaries and distant luminous quasars. I will discuss the forty-year journey, which my colleagues and I have been undertaking to study the mass distribution in the Center of our Milky Way from ever more precise, long-term studies of the motions of gas and stars as test particles of the space time. These studies show the existence of a four million solar mass object, which must be a single massive black hole, beyond any reasonable doubt.
Event date: 09/02/2023
Speaker: Prof. Reinhard GENZEL
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Cosmology and Astronomy and Physics
- Keywords:
- Astrophysics Astronomy Deep space -- Milky Way Nobel Prize winners General relativity (Physics) Black holes (Astronomy)
- Resource Type:
- Video
-
Courseware
This course provides a thorough introduction to the principles and methods of physics for students who have good preparation in physics and mathematics. Emphasis is placed on problem solving and quantitative reasoning. This course covers Newtonian mechanics, special relativity, gravitation, thermodynamics, and waves.
- Course related:
- AP10005 Physics I
- Subjects:
- Physics
- Keywords:
- Physics
- Resource Type:
- Courseware
-
Video
In this lesson, we'll be looking at the cell cycle. This is the lifespan of a eukaryotic somatic cell. A somatic cell is any cell in the body of an organism, except for sex cells such as sperm and egg cells. The cell cycle describes the sequence of cell growth and division. A cell spends most of its life a state called interphase. Interphase has three phases, the G1, S, and G2 phases. Interphase is followed by cell division, which has one phase, the M phase. Together these four phases make up the entire cell cycle. G1 of interphase is sometimes called growth 1 or gap phase 1. In G1, a cell is busy growing and carrying out whatever function it's supposed to do. Note that some cells, such as muscle and nerve cells, exit the cell cycle after G1 because they do not divide again. A cell enters the S phase after it grows to the point where it's no longer able to function well and needs to divide. The S stands for synthesis, which means to make, because a copy of DNA is being made during this phase. Once DNA replication is complete, the cell enters the shortest and the last part of interphase called G2, also known as growth 2 or gap phase 2. Right now, it's enough to know that further preparations for cell division take place in the G2 phase. Now that interphase is over, the cell is ready for cell division, which happens in the M phase. The M phase has two events. The main one is mitosis, which is division of the cell's nucleus, followed by cytokinesis, a division of the cytoplasm. So, at the end of M phase, you have two daughter cells identical to each other and identical to the original cell. Let's review. The cell cycle describes the life cycle of an individual cell. It has four phases, three in interphase and one for cell division. Most cell growth and function happen during G1. The cell enters the S phase when it needs to divide. In this phase the cell replicates its DNA. Replication just means the cell makes a copy of its DNA. In G2, the cell undergoes further preparations for cell division. Finally, we have cell division in the M phase. The M phase consists of mitosis, which is nuclear division, and cytokinesis, or division of the cytoplasm. We'll explore the details of mitosis and cytokinesis separately
- Subjects:
- Biology
- Keywords:
- Cell cycle
- Resource Type:
- Video
-
Others
Welcome to the Coding Train with Daniel Shiffman! A community dedicated to learning creative coding with beginner-friendly tutorials and projects on YouTube and more.
- Subjects:
- Computing, Data Science and Artificial Intelligence
- Keywords:
- Computer programming Coding theory
- Resource Type:
- Others
-
Others
MyScope was developed by Microscopy Australia to provide an online learning environment for those who want to learn about microscopy. The platform provides insights into the fundamental science behind different microscopes, explores what can and cannot be measured by different systems and provides a realistic operating experience on high end microscopes.
We sincerely hope you find the website an enjoyable environment where you can explore the microscopy space and leave ready to undertake your own exciting experiments.
- Course related:
- CE620 Research Methods
- Subjects:
- Laboratory Techniques and Safety
- Keywords:
- Microscopy
- Resource Type:
- Others
-
Others
Learn to code, design, and more—all on your own time
- Subjects:
- Computing, Data Science and Artificial Intelligence
- Keywords:
- Mobile apps Computer programming Coding theory
- Resource Type:
- Others
-
MOOC
The Machine Learning Specialization is a foundational online program created in collaboration between DeepLearning.AI and Stanford Online. This beginner-friendly program will teach you the fundamentals of machine learning and how to use these techniques to build real-world AI applications.
This Specialization is taught by Andrew Ng, an AI visionary who has led critical research at Stanford University and groundbreaking work at Google Brain, Baidu, and Landing.AI to advance the AI field.
This 3-course Specialization is an updated version of Andrew’s pioneering Machine Learning course, rated 4.9 out of 5 and taken by over 4.8 million learners since it launched in 2012.
It provides a broad introduction to modern machine learning, including supervised learning (multiple linear regression, logistic regression, neural networks, and decision trees), unsupervised learning (clustering, dimensionality reduction, recommender systems), and some of the best practices used in Silicon Valley for artificial intelligence and machine learning innovation (evaluating and tuning models, taking a data-centric approach to improving performance, and more.) By the end of this Specialization, you will have mastered key concepts and gained the practical know-how to quickly and powerfully apply machine learning to challenging real-world problems. If you’re looking to break into AI or build a career in machine learning, the new Machine Learning Specialization is the best place to start.
- Course related:
- AAE5103 Artificial Intelligence in Aviation Industry
- Subjects:
- Computing, Data Science and Artificial Intelligence
- Keywords:
- Artificial intelligence Machine learning
- Resource Type:
- MOOC
-
Others
All resources and notes from the Complete Web Developer in 2022: Zero to Mastery course
- Course related:
- LGT3109 Introduction to Coding for Business with Python, COMP1001 Problem Solving Methodology in Information Technology, COMP3211 Software Engineering, and COMP3421 Web Application Design and Development
- Subjects:
- Computing, Data Science and Artificial Intelligence
- Keywords:
- Web site development Web sites -- Design
- Resource Type:
- Others