Search Constraints
Number of results to display per page
Results for:
Search Results
-
e-book
"Some of the most important documents used in the workplace are the technical drawings, diagrams, and schematics that specify how fabrication and construction tasks will be carried out, or describe the composition and assembly of equipment. One of the essential skills for anyone involved in a trade is the ability to correctly interpret drawings. If you are in a construction or fabrication industry, you will need to be able to examine a drawing, take information from it, and visualize the finished product. If you are in a service or maintenance industry, you will need to interpret exploded drawings in order to properly repair or assemble equipment"--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Architecture -- Designs plans Textbooks
- Resource Type:
- e-book
-
e-book
"Hand tools are used in almost every trade, but many of them have particular applications in a specific trade. It is likely you have used some of these tools already at work, at school, or at home, but this may be the first time you have had the chance to study some of the tools' designs and applications in detail. The following list of lines and competencies was generated with the goal of creating an entry-level trades training resource, while still offering the flexibility for lines to be used as stand-alone books. Line C - Tools and Equipment. C-1 Describe Common Hand Tools and Their Uses, C-2 Describe Common Power Tools and Their Uses, C-3 Describe Rigging and Hoisting Equipment, C-4 Describe Ladders and Platforms."--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Hoisting machinery Textbooks Hoisting machinery -- Rigging
- Resource Type:
- e-book
-
e-book
"Document use is one of the nine essential skills identified by the Government of Canada to be successful in the workplace. It refers to the skills needed to find, enter, and use letters, numbers, symbols, and images in electronic and paper form. In the trades, people use document literacy skills to find and enter information in forms, lists, tables, graphs, maps, and drawings"--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Textbooks Stards Engineering
- Resource Type:
- e-book
-
e-book
"Codes, regulations, standards, specifications, and recommended practices are used in all aspects of construction, fabrication, manufacturing, and inspection. The following list of lines and competencies was generated with the goal of creating an entry-level trades training resource, while still offering the flexibility for lines to be used as stand-alone books. Line D - Organizational Skills. D-1 Solve Trades Mathematical Problems, D-2 Apply Science Concepts to Trades Applications, D-3 Read Drawings and Specifications, D-4 Use Codes, Regulations, and Standards, D-5 Use Manufacturer and Supplier Documentation, D-6 Plan Projects."--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Textbooks Stards Engineering
- Resource Type:
- e-book
-
e-book
"This Competency introduces the basic principles governing the structure and the behaviour of solids, liquids, and gases. You will look at the effects forces have on objects and the basic machines that transmit a force. You will also examine the effects of thermal and electrical energy. The following list of lines and competencies was generated with the goal of creating an entry-level trades training resource, while still offering the flexibility for lines to be used as stand-alone books. Line D - Organizational Skills. D-1 Solve Trades Mathematical Problems, D-2 Apply Science Concepts to Trades Applications, D-3 Read Drawings and Specifications, D-4 Use Codes, Regulations, and Standards, D-5 Use Manufacturer and Supplier Documentation, D-6 Plan Projects."--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Textbooks Building trades Industrial arts
- Resource Type:
- e-book
-
e-book
"Hand tools are used in almost every trade, but many of them have particular applications in a specific trade. It is likely you have used some of these tools already at work, at school, or at home, but this may be the first time you have had the chance to study some of the tools' designs and applications in detail. The following list of lines and competencies was generated with the goal of creating an entry-level trades training resource, while still offering the flexibility for lines to be used as stand-alone books. Line C - Tools and Equipment. C-1 Describe Common Hand Tools and Their Uses, C-2 Describe Common Power Tools and Their Uses, C-3 Describe Rigging and Hoisting Equipment, C-4 Describe Ladders and Platforms."--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Tools Textbooks
- Resource Type:
- e-book
-
e-book
"Power tools play a major role in virtually every trade. You will be expected to be familiar with a wide range of portable and stationary power tools and to understand the safe operation of these tools. Proper maintenance improves the life and performance of the tool. Correct set-up and operating procedures ensure good results and prevent injury. The following list of lines and competencies was generated with the goal of creating an entry-level trades training resource, while still offering the flexibility for lines to be used as stand-alone books. Line C - Tools and Equipment. C-1 Describe Common Hand Tools and Their Uses, C-2 Describe Common Power Tools and Their Uses, C-3 Describe Rigging and Hoisting Equipment, C-4 Describe Ladders and Platforms."--BC Campus website.
- Subjects:
- Electronic and Information Engineering, Electrical Engineering, and Mechanical Engineering
- Keywords:
- Textbooks Power tools
- Resource Type:
- e-book
-
e-book
This book deals with an introduction to the flow of compressible substances (gases). The main difference between compressible flow and almost incompressible flow is not the fact that compressibility has to be considered. Rather, the difference is in two phenomena that do not exist in incompressible flow. The first phenomenon is the very sharp discontinuity (jump) in the flow in properties. The second phenomenon is the choking of the flow. Choking is when downstream variations don't effect the flow. Though choking occurs in certain pipe flows in astronomy, there also are situations of choking in general (external) flow.
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Fluid dynamics Gas dynamics Textbooks
- Resource Type:
- e-book
-
e-book
The topic of fluid mechanics is common to several disciplines: mechanical engineering, aerospace engineering, chemical engineering, and civil engineering. In fact, it is also related to disciplines like industrial engineering, and electrical engineering. While the emphasis is somewhat different in this book, the common material is presented and hopefully can be used by all. One can only admire the wonderful advances done by the previous geniuses who work in this field. In this book it is hoped to insert, what and when a certain model is suitable than other models. One of the difference in this book is the insertion of the introduction to multiphase flow. Clearly, multiphase is an advance topic. However, some minimal familiarity can be helpful for many engineers who have to deal with non pure single phase fluid. This book is the third book in the series of POTTO project books. POTTO project books are open content textbooks so everyone are welcome to joint in. The topic of fluid mechanics was chosen just to fill the introduction chapter to compressible flow. During the writing it became apparent that it should be a book in its own right. In writing the chapter on fluid statics, there was a realization that it is the best chapter written on this topic. It is hoped that the other chapters will be as good this one. This book is written in the spirit of my adviser and mentor E.R.G. Eckert. Eckert, aside from his research activity, wrote the book that brought a revolution in the education of the heat transfer. Up to Egret's book, the study of heat transfer was without any dimensional analysis. He wrote his book because he realized that the dimensional analysis utilized by him and his adviser (for the post doc), Ernst Schmidt, and their colleagues, must be taught in engineering classes. His book met strong criticism in which some called to "burn" his book. Today, however, there is no known place in world that does not teach according to Eckert's doctrine. It is assumed that the same kind of individual(s) who criticized Eckert's work will criticize this work. Indeed, the previous book, on compressible flow, met its opposition. For example, anonymous Wikipedia user name EMBaero claimed that the material in the book is plagiarizing, he just doesn't know from where and what. Maybe that was the reason that he felt that is okay to plagiarize the book on Wikipedia. These criticisms will not change the future or the success of the ideas in this work. As a wise person says "don't tell me that it is wrong, show me what is wrong"; this is the only reply. With all the above, it must be emphasized that this book is not expected to revolutionize the field but change some of the way things are taught. The book is organized into several chapters which, as a traditional textbook, deals with a basic introduction to the fluid properties and concepts (under construction). The second chapter deals with Thermodynamics. The third book chapter is a review of mechanics. The next topic is statics. When the Static Chapter was written, this author did not realize that so many new ideas will be inserted into this topic. As traditional texts in this field, ideal flow will be presented with the issue of added mass and added forces (under construction). The classic issue of turbulence (and stability) will be presented. An introduction to multi-phase flow, not a traditional topic, will be presented next (again under construction). The next two chapters will deal with open channel flow and gas dynamics. At this stage, dimensional analysis will be present (again under construction).
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Fluid dynamics Textbooks
- Resource Type:
- e-book
-
e-book
Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.
- Subjects:
- Electrical Engineering and Mechanical Engineering
- Keywords:
- Direct energy conversion Textbooks
- Resource Type:
- e-book