Search Constraints
Number of results to display per page
Results for:
Language
English
Remove constraint Language: English
Publisher
Hong Kong Polytechnic University
Remove constraint Publisher: Hong Kong Polytechnic University
« Previous |
1 - 10 of 138
|
Next »
Search Results
-
Video
The lecture commenced with a warm welcome and introduction of the speaker by Prof. CHEN Qingyan, Director of PAIR. Prof. McCulloch kickstarted his presentation by giving a brief overview of the current molecular designs of organic semiconductor polymers for charge transport. He explained how they enable organic thin film transistors to achieve high charge carrier mobility and their applications in flexible screens and other electronic devices. He then elaborated on the molecular characteristics of the indacenodithiophene-co-benzothiadiazole copolymer, a semiconductor polymer that exhibits high carrier mobility and is commonly used in organic transistors.
Prof. McCulloch also emphasised the importance of “conformational coplanarity” and “side chain assisted self-assembly”. These features help enhance one-dimensional transport along the “conjugated polymer backbone” and form sterically free “crossing points”, allowing charges to hop between chains. He further highlighted that current research has shown that the molecular conformation and film microstructure are influenced by the design and processing conditions of organic semiconductor polymers, and these significant findings can help achieve optimal charge transport properties.
Following the presentation was a question-and-answer session moderated by Prof. YAN Feng, Associate Director of the Research Institute for Intelligent Wearable Systems (RI-IWEAR) and Chair Professor of Organic Electronics in the Department of Applied Physics. The audience engaged in a productive discussion with Prof. McCulloch.
Event date: 14/01/2025
Speaker: Prof. Iain McCULLOCH (Princeton University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Chemistry
- Keywords:
- Organic semiconductors Polymers Charge transfer
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome and brief speaker introduction by Prof. CHEN Qingyan, Director of PAIR. Prof. Russell kickstarted his presentation by giving a brief overview of the historical development of photonic crystal fibre (PCF), highlighting how advancements in optical fibres, Bragg scattering, photonic bandgaps and drawing towers laid the foundation for PCF breakthroughs. Prof. Russell shared that he proposed in 1991 a glass fibre with a periodic array of microscopic hollow channels running along its length might guide light in novel ways, and many PCFs emerged from drawing towers at universities in subsequent years. Next, he elaborated on the advantages of PCF, explaining how it offers enhanced control over the propagation light, and how this property has enabled valuable applications. He shared his research in light-guiding PCF, hollow core PCF filled with gas, and twisted PCF, reviewing how some of the scientific discoveries made possible by PCF have evolved into real-world applications.
Event date: 05/11/2024
Speaker: Prof. Philip RUSSELL
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Physics
- Keywords:
- Fiber optics Optical fibers Optical communications
- Resource Type:
- Video
-
Video
The seminar began with a warm welcome by Prof. CHEN Qingyan, Director of PAIR, followed by a brief introduction of the speaker by Mr Gavin NGAI, Deputy Director of the Global Engagement Office. Dr Tzezana commenced his presentation by identifying the common myths about AI and discussing how these myths hinder public awareness of AI’s rapid development in various fields. He then projected AI’s capabilities towards the end of the decade, suggesting that AI would soon outperform humans in many areas. Dr Tzezanna also examined the broader implications of these advancements, particularly their impact on the future of work, and offered insights into the skills and knowledge areas essential for staying competitive and successful in this rapidly evolving landscape.
Event date: 24/9/2024
Speaker: Dr Roey TZEZANA
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Mechanical Engineering and Computing, Data Science and Artificial Intelligence
- Keywords:
- Artificial intelligence
- Resource Type:
- Video
-
Video
The seminar began with a warm welcome by Prof. ZHANG Weixiong, Associate Director of PAIR, followed by a brief introduction of the speaker by Prof. ZHANG Chengqi, Chair Professor of Artificial Intelligence. Prof. Liu kick-started his presentation by outlining the key milestones in the evolution of robotics, and pointed out that human-centred intelligent robots should be able to co-exist, cooperate and collaborate with humans. He stated that robotics is a truly interdisciplinary field that combines engineering, science and humanities. Next, through a series of case studies, Prof. Liu examined how intelligent robots have been designed to work alongside humans in various applications, including civil infrastructure maintenance, construction, and manufacturing. He then discussed the dynamics of collaboration between humans and robots, and examined issues such as trust, computational modelling, physical and cognitive workload, brain-robot interface and human-centred design. By reflecting on the lessons learnt from these case studies, Prof. Liu highlighted both successes and challenges. At the end of his presentation, Prof. Liu emphasised that human-robot teaming is an interdisciplinary field. He also pointed out some areas for further development in the field, highlighting the many opportunities in robotics.
Event date: 10/10/2024
Speaker: Prof. LIU Dikai
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Mechanical Engineering and Computing, Data Science and Artificial Intelligence
- Keywords:
- Artificial intelligence Robotics Human-robot interaction
- Resource Type:
- Video
-
Video
The lecture will explore the role of technology in promoting environmental sustainability. It focuses on the development and implementation of innovative technologies that can help address environmental challenges and contribute to a more sustainable future.We are developing green technologies to benefit sustainable environment, which will enable people and the environment to prosper together. The Center for Filtration Research (CFR) at the University of Minnesota, collaborating with 20 leading international filtration manufacturers and end users, was established to develop green technologies to mitigate PM2.5, VOCs, ozone and other environmental pollutants. CFR investigators perform fundamental and applied research on air, gas and liquid filtration. The current research projects include indoor air cleaning and Covid prevention, bioaerosols sensor development and evaluation, nanofiber production and modeling, nanotechnology and instrumentation developments, among others. Large-scale air cleaning towers are established in Xi’an and Yancheng in China, and two additional towers in Delhi, India. They are developed to mitigate PM2.5 pollutants in urban air. The second-generation tower in Yancheng is developed to reduce not only the PM2.5 but also CO2 in the atmosphere. The construction of a set of large-scale air cleaning towers to capture 16 million tons of CO2 annually is proposed. All these research and development activities are helping to improve sustainable environment.
Event date: 13/9/2024
Speaker: Prof. PUI David (University of Minnesota)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Mechanical Engineering
- Keywords:
- Filters filtration Sustainable development Air -- Pollution Separation (Technology) Indoor air pollution Aerosols
- Resource Type:
- Video
-
Video
A rapidly expanding research area involves the development of routes to shape programmable three-dimensional (3D) structures with feature sizes in the mesoscopic range (that is, between tens of nanometres and hundreds of micrometres). A goal is to establish methods to control the properties of materials systems and the function of devices, through not only static architectures, but also morphable structures and shape-shifting processes. Soft matter equipped with responsive components can switch between designed shapes, but cannot support the types of dynamic morphing capabilities needed to reproduce continuous shape-shifting processes of interest for many applications. Challenges lie in the establishment of 3D assembly/fabrication techniques compatible with wide classes of materials and 3D geometries, and schemes to program target shapes after fabrication.
In this talk, Prof. HUANG Yonggang will introduce a mechanics-guided assembly approach that exploits controlled buckling for constructing complex 3D micro/nanostructures from patterned two-dimensional (2D) micro/nanoscale precursors that can be easily formed using established semiconductor technologies. This approach applies to a very broad set of materials (e.g., semiconductors, polymers, metals, and ceramics) and even their heterogeneous integration, over a wide range of length scales (e.g., from 100 nm to 10 cm). To allow realisation of 3D mesostructures that are capable of qualitative shape reconfiguration, Prof. HUANG devises a loading-path controlled strategy that relies on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear buckling. Prof. HUANG will also introduce a recent work on shape programmable soft surface, constructed from a matrix of filamentary metal traces, driven by programmable, distributed electromagnetic forces that follow from the passage of electrical currents in the presence of a static magnetic field. Under the guidance of a mechanics model-based strategy to solve the inverse problem, the surface can morph into a wide range of 3D target shapes and shape-shifting processes. The compatibility of these approaches with the state-of-the-art fabrication/processing techniques, along with the versatile capabilities, allow transformation of diverse existing 2D microsystems into complex configurations, providing unusual design options in the development of novel functional devices.
Event date: 08/08/2024
Speaker: Prof. HUANG Yonggang (Northwestern University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Buckling (Mechanics) Materials science Elastomers Microstructure
- Resource Type:
- Video
-
Others
This video is made by Dr. Pearl Lin and Dr. Clare Fung's project, "Great Case of Marketing in the Hospitality and Tourism Industry." A special thanks to Bao Yanli, who provided information and insights for this video. This case discusses that to celebrate the 50th anniversary of China-Spain diplomatic relations and the anniversary of its hotels in China, Gran Meliá hotels launched a campaign focused on the "Mantón de Manila", a traditional Spanish shawl with Chinese cultural origins. The campaign leveraged the heritage and craftsmanship of both countries, featuring flamenco performances, Shu embroidery, and high-end experiences at Gran Meliá hotels in China. The integrated marketing effort generated significant media coverage and social media engagement, reinforcing Gran Meliá's position as a purveyor of Spanish luxury in the Chinese market.
本視頻由林博士和馮博士的專案「酒店和旅遊業行銷的傑出案例」製作。特別感謝包豔麗為本視頻提供信息和見解。本案例探討了為慶祝中西建交50周年及旗下酒店在華開業周年，美利亞酒店集團旗下Gran Meliá品牌推出以“Mantón de Manila”為主題的營銷活動。Mantón de Manila是一種源自中國文化的西班牙傳統披肩。該營銷活動充分利用了兩國的傳統和工藝，包括弗拉門戈表演、蜀繡在中國Gran Meliá酒店的高端體驗。整合行銷活動獲得了大量媒體報導和社交媒體參與，鞏固了Gran Meliá这一西班牙奢華品牌在中国市场的地位。
- Subjects:
- Hotel, Travel and Tourism
- Keywords:
- Hotels -- Marketing Cultural property Hospitality industry -- Marketing
- Resource Type:
- Others
-
Video
The idea of translanguaging has disrupted much of the thinking about language, communication and learning and raised some fundamental questions about human language and human cognition. One of these questions concerns an assumption that seems to underlie a great deal of the work on intercultural communication, and that is, speakers of different named languages not only use language differently, but also think differently and have different worldviews. In this talk, I want to invite the participants to rethink about this issue, from the perspective of Translanguaging, which posits that bilinguals and multilinguals do not think unilingually and thinking goes beyond named languages and indeed beyond what has traditionally been conceived as linguistic versus non-linguistic processes. I offer my views on the existing work in intercultural communication and cross-linguistic studies of cognitive processing and Linguistic Relativity. Implications of this common-humanity-based conceptual stance for intercultural communication including business and workplace lingua franca communication, as well as for language learning and pedagogy, and research design are discussed.
Event date: 18/07/2024
Speaker: Prof. Wei LI (University College London)
Hosted by: Faculty of Humanities
- Subjects:
- Language and Languages
- Keywords:
- Communicative competence Translanguaging (Linguistics) Multilingualism Intercultural communication Language awareness
- Resource Type:
- Video
-
Video
Humans have long tried to make artificial versions of themselves. It is now well established that we attribute human-like states to artificial others. However, the effect of interacting with artificial minds and bodies on the human sense of self and self-identity is less understood. In this talk I will present theoretical and empirical work looking at embodied joint agency in human/ human versus human/ robotic and virtual agents. Specifically, I will outline the key role of the human embodiment and sense of self in establishing joint agency with artificial others. I will discuss key implications of these claims on recent efforts to design autonomous and interactive artificial others. I will introduce the notion of ‘hybrid agency’ to describe these new, technologically mediated ways to embody and control in tandem human and artificial minds and bodies in real and virtual environments.
Event date: 7/2/2024
Speaker: Prof. Anna CIAUNICA (University of Lisbon)
- Subjects:
- Technology
- Keywords:
- Technology -- Social aspects Human-computer interaction -- Psychological aspects Artificial intelligence
- Resource Type:
- Video
-
Video
The seminar commenced with a welcome speech and speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. This was followed by Prof. Leng’s presentation. He first provided a brief background about shape memory polymers (SMP), pointing out that these smart materials can reversibly change between permanent and temporary shapes in response to changes in external stimuli such as temperature. Next, he gave an overview of the researchers from different scientific research institutions and universities around the world who specialise in SMP research, and the types of SMP materials that HIT researchers focus on. He said that SMP are hard to actuate and their recovery strength and speed are low, and so relevant solutions to these challenges are important for the development of SMP composites (SMPC). Prof. Leng then gave examples demonstrating how SMPC can be prepared through actuation methods involving different stimuli such as heat, electricity, magnetism, radio frequency, solution/water, light, etc. He mentioned that SMPC can be used to prepare various structures for aerospace, smart manufacturing, photoelectric applications, microelectromechanical systems applications, and smart clothing. After that, Prof. Leng introduced 4D printing, a novel additive manufacturing process for producing printed objects that can adaptively change their configurations/properties in response to external stimuli. He mentioned that 4D printing is important for producing a range of SMPC-based materials for biomedical applications. To conclude, Prof. Leng said that SMP research is a fast-growing emerging research field. He anticipated that shape memory smart structures incorporated with sensors, actuators, and controllers, would be widely used in aerospace, civil aviation, automotive, energy and daily life.
Event date: 15/07/2024
Speaker: Prof. LENG Jinsong
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Smart materials Polymeric composites Additive manufacturing Shape memory polymers
- Resource Type:
- Video