Search Constraints
Number of results to display per page
Results for:
Keywords
Engineering geology
Remove constraint Keywords: Engineering geology
1 - 8 of 8
Search Results
-
Video
The ISRM is extremely grateful to Dr. John Franklin for preparing this series of videos on Geological Engineering.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Geotechnical engineering Engineering geology
- Resource Type:
- Video
-
Others
The ISRM is extremely grateful to Erik Eberhardt of the University of British Columbia in Canada for preparing this series of downloadable ISRM Lectures on rock mechanics and rock engineering.
1 - Introduction
2 - Observational Approach
3 - Empirical Design
4 - Kinematic Analysis I
5 - Kinematic Analysis II
6 - Limit Equilibrium
7 - In Situ Stress
8 - Stress Analysis
9 - Deformation Analysis
10 - Discontinuum Analysis
11 - Excavation Methods
12 - Rock Support
13 - Instrumentation
14 - Brittle Fracture
15 - Case Histories
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- Others
-
MOOC
The ISRM is extremely grateful to Prof. John Hudson for preparing this series of downloadable ISRM Lectures.
Lecture 1 - Principles - Introduction
Lecture 2 - Rock stress
Lecture 3 - Stress path, enginering failures
Lecture 4 - Complete force-displacement curve
Lecture 5 - Fracture frequency
Lecture 6 - In situ rock failure
Lecture 7 - Archeopteryx and Open Cast Coal Mine
Lecture 8 - Modelling and Design
Lecture 9 - Failure and profilagons
Lecture 10 - SI and TA
Lecture 11 - JinPing II project
Lecture 12 - Cultural
Lecture 13 - Writing a paper
Lecture 14 - Rock Mechanics Future
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC
-
MOOC
This course provides an introduction to rock mechanics principles including the mechanics of rock materials, rock joints and rock masses, rock mechanics characterisation and rock mass classifications. The course is prepared for students studying civil and mining engineering, and other science and engineering disciplines concerning rocks.
The course is an on-line course, with approximately 30 hours of lectures. It covers 5 parts: (a) origin of rocks and rock masses, (b) properties and mechanics of rock materials, (c) properties and mechanics of rock joints, (d) rock mass classifications and properties, and a supplement part (e) rock mechanics testing and analysis.
The lectures are given by Professor Jian Zhao, who has been teaching rock mechanics and rock engineering since 1990, first at Nanyang Technological University of Singapore, then at Ecole Polytechnique Fédérale de Lausanne of Switzerland, and currently at Monash University in Melbourne of Australia. He is a Fellow of the International Society for Rock Mechanics since 2015.
Rock Engineering, a sequential on-line course to Rock Mechanics Principles given by the same lecturer will be made available in near future.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC
-
MOOC
The Rock Engineering Practice course was recorded by Professor Zhao Jian, an ISRM fellow, of Monash University in Melbourne, Australia, and contains 21 lectures divided in three parts.
Part 1. Site Investigation and Testing
Part 2. Rock Slope Engineering
Part 3. Rock Foundation Engineering
Part 4. Underground Rock Excavations
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC
-
MOOC
The ISRM course on "Prevention methods for Landslides in Rock Masses" by Prof. Zhong-qi Quentin YUE, from the University of Hong Kong (see CV at the bottom of the page) is now available, in open access. The course has four parts, with a total of 24 lectures:
Part A - Understanding landslides in rock mass (four lectures)
Part B - Methods for quantifying rock mass (eight lectures)
Part C - Methods for landslide potential of rock mass (five lectures)
Part D - Measures for preventing landslides in rock mass (seven lectures)
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Lslide hazard analysis Lslides -- Prevention Engineering geology
- Resource Type:
- MOOC
-
MOOC
This course was recorded in 2021 by Dr Nick Barton, an ISRM Fellow and recipient of the 2011 Müller Award of the ISRM. In this course, it includes some examples of empirical methods in rock mechanics and rock engineering: for tunnelling, rock joints, rock masses, and rock slopes, cliffs and mountains (Q, QTBM, JRC, JCS, QSLOPE and other topics) The course has four parts, each opening in its own page.
Part 1 - The many faces of Q
Part 2 - Shear Strength of Rock, Rock Joints, etc.
Part 3 - Failure Modes in Rock Masses
Part 4 - TBM Performance and Prognosis
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC
-
MOOC
This course was coordinated in 2021 by Prof. Leandro Alejano, from University of Vigo, Spain and ISRM Vice President for Europe. The course has an introduction and four parts, each opening in its own page.
Rock mass characterization and monitoring is based on information gathered at different levels that contributes to a good understanding of the rock mass behavior. Geological, geostructural and geomechanical information is needed to set up a reliable model of the rock mass. The development of advanced survey techniques, such as digital photogrammetry, laser scanning and SAR interferometry has supplied powerful instruments in several fields including rock mechanics, where some efforts have been dedicated to improve the quality and the quantity of information available. In this short course taught by relevant European experts, the basics of these techniques are briefly reviewed and a number of interesting rock mechanics applications will be shown.
Part 0 - Course Presentation (Leandro Alejano)
Part 1 - A.M. Ferrero & M.R.Migliazza - Introduction of advanced survey methods for rock mass characterization and monitoring (A.M. Ferrero & M.R.Migliazza)
Part 2 - Methods for automatic or semi-automatic discontinuity traces sampling on digital rock mass (Gessica Umili)
Part 3 - Rock Mass Characterization and Monitoring based on Advanced Remote Sensing Techniques (Adrían Riquelme)
Part 4 - SAR Interferometry in Rock Mechanics (Roberto Tomas)
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC