Search Constraints
Number of results to display per page
Results for:
Affiliation
Delft University of Technology
Remove constraint Affiliation: Delft University of Technology
1 - 44 of 44
Search Results
-
Courseware
In this nuclear energy course, we will tackle provocative questions such as: -Is nuclear energy a good substitute for fossil fuels to reduce our CO2 emission or not? -Can nuclear reactors operate safely without any harm to the public and environment? -How much nuclear waste is produced and how long does it need to be stored safely? -How can we make nuclear energy clean and more sustainable? -How much are nuclear energy costs? You will learn the physics behind nuclear science, how to gain energy from nuclear fission, how nuclear reactors operate safely, and the life cycle of nuclear fuel: from mining to disposal. In the last part of the course, we will focus on what matters most in the public debate: the economic and social impact of nuclear energy but also the future of energy systems. Practically, we will: -Teach you about nuclear science and technology (radiation and radioactivity, nuclear reactions, nuclear reactors and fuel cycle, economics of nuclear energy, and the sociality aspects) -Show you short videos about the theory and practical implementation of nuclear energy -Stimulate discussion and debate about nuclear energy -Ask you to formulate your own opinion about nuclear energy and its role in society The GENTLE consortium has sponsored and prepared this course. GENTLE is focused on maintaining the current high level of nuclear safety, and developing a highly skilled and well informed nuclear workforce, following the conclusion of the Council of the EU that it “it is essential to maintain in the European Union a high level of training in the nuclear field” to deal with reactor fleet safely, decommission obsolete plants, be involved in new builds where policy dictates, and deal with the legacy and future radioactive wastes.
- Subjects:
- Physics and Electrical Engineering
- Keywords:
- Nuclear engineering Nuclear physics Nuclear energy
- Resource Type:
- Courseware
-
Courseware
Computability Theory deals with one of the most fundamental questions in computer science: What is computing and what are the limits of what a computer can compute? Or, formulated differently: “What kind of problems can be algorithmically solved?” During the course this question will be studied. Firstly, the notion of algorithm or computing will be made precise by using the mathematical model of a Turing machine. Secondly, it will be shown that basic issues in computer science, like “Given a program P does it halt for any input x?” or “Given two program P and Q, are they equivalent?” cannot be solved by any Turing machine. This shows that there exist problems that are impossible to solve with a computer, the so-called “undecidable problems”. The book is in English, the recorded lectures and slides however, are in Dutch
- Subjects:
- Computing
- Keywords:
- Machine theory Computational complexity Computable functions
- Resource Type:
- Courseware
-
Courseware
This version of the subject Technology Dynamics and Transition Management was tought in co-operation with the Harbin Institute of Technology in China. At the heart of this module lies a model of technology development from a social perspective, which will be applied to water problems in present-day China.
- Subjects:
- Technology
- Keywords:
- Water resources development China Indonesia -- Java Technological innovations Technology -- Social aspects
- Resource Type:
- Courseware
-
Courseware
Companies and governments have to decide upon technological strategies, i.e. which products are to be developed and which processes and infrastructures are required for the future. Several tools to consider technological strategies are dealt with in this course.
- Subjects:
- Technology
- Keywords:
- Sustainable development Technological forecasting Technological innovations -- Forecasting Technological innovations -- Management
- Resource Type:
- Courseware
-
Courseware
The purpose of this course is to learn how to specify the behavior of embedded systems and to experience the design of a provably correct system. In this course you will learn how to formally specify requirements and to prove (or disprove) them on the behaviour. With a practical assignment you will experience how to apply the techniques in practice.
- Subjects:
- Computing
- Keywords:
- Embedded computer systems
- Resource Type:
- Courseware
-
Courseware
A transition to sustainable energy is needed for our climate and welfare. In this engineering course, you will learn how to assess the potential for energy reduction and the potential of renewable energy sources like wind, solar and biomass. You’ll learn how to integrate these sources in an energy system, like an electricity network and take an engineering approach to look for solutions and design a 100% sustainable energy system.
- Subjects:
- Electrical Engineering
- Keywords:
- Solar energy Renewable energy sources Biomass energy Wind power Sustainable development
- Resource Type:
- Courseware
-
Courseware
Exploration of space is never out of the news for long and the desire to construct lower-cost, reliable and more capable spacecraft has never been greater. At TU Delft years of technology development and research experience in space engineering allow us to offer this course, which examines spacecraft technologies for satellites and launch vehicles. This course provides: - knowledge of the technical principles of rockets and satellite bus subsystems; - the ability to select state-of-the-art, available components; - analysis of the physical and technical limitations of subsystem components; - identification of the key performance parameters of different spacecraft subsystems; - comparison of the values obtained by ideal theory and real-life ones; - opportunity to make preliminary designs for a spacecraft based on its key requirements. Other spacecraft types, such as interplanetary rovers, are not covered in this course. Spacecraft instrumentation and other payloads are also not covered.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Space vehicles
- Resource Type:
- Courseware
-
Courseware
In electrical engineering, solid-state materials and the properties play an essential role. A thorough understanding of the physics of metals, insulators and semiconductor materials is essential for designing new electronic devices and circuits. After short introduction of the IC fabrication process, the course starts with the crystallography. This will be followed by the basic principle of the quantum mechanics, the sold-state physics, band-structure and the relation with electrical properties of the solid-state materials. When the material physics has been throughly understood, the physics of the semiconductor device follows quite naturally and can be understood quickly and efficiently.
- Subjects:
- Physics and Electrical Engineering
- Keywords:
- Semiconductors Solid state physics Matter -- Properties
- Resource Type:
- Courseware
-
Courseware
The technologies used to produce solar cells and photovoltaic modules are advancing to deliver highly efficient and flexible solar panels. In this course you will explore the main PV technologies in the current market. You will gain in-depth knowledge about crystalline silicon based solar cells (90% market share) as well as other up and coming technologies like CdTe, CIGS and Perovskites. This course provides answers to the questions: How are solar cells made from raw materials? Which technologies have the potential to be the major players for different applications in the future?
- Subjects:
- Electrical Engineering
- Keywords:
- Solar cells Photovoltaic power systems Photovoltaic power generation Silicon solar cells
- Resource Type:
- Courseware
-
Courseware
The key factor in getting more efficient and cheaper solar energy panels is the advance in the development of photovoltaic cells. In this course you will learn how photovoltaic cells convert solar energy into useable electricity. You will also discover how to tackle potential loss mechanisms in solar cells. By understanding the semiconductor physics and optics involved, you will develop in-depth knowledge of how a photovoltaic cell works under different conditions. You will learn how to model all aspects of a working solar cell. For engineers and scientists working in the photovoltaic industry, this course is an absolute must to understand the opportunities for solar cell innovation.
- Subjects:
- Electrical Engineering
- Keywords:
- Solar energy Renewable energy sources Photovoltaic cells Photovoltaic power generation
- Resource Type:
- Courseware
-
Courseware
In the third edition of Solar Energy, you will learn to design a complete photovoltaic system. This course introduces the technology that converts solar energy into electricity, heat and solar fuels with a main focus on electricity generation. Photovoltaic (PV) devices are presented as advanced semiconductor devices that deliver electricity directly from sunlight. The emphasis is on understanding the working principle of a solar cell, fabrication of solar cells, PV module construction and the design of a PV system. You will gain a greater understanding of the principles of the photovoltaic conversion- the conversion of light into electricity. This course explores the advantages, limitations and challenges of different solar cell technologies, such as crystalline silicon solar cell technology, thin film solar cell technologies and the latest novel solar cell concepts as studied on lab-scale. We will discuss the specifications of solar modules and demonstrate how to design a complete solar system for any particular application.
- Subjects:
- Electrical Engineering
- Keywords:
- Solar cells Solar energy Photovoltaic power systems
- Resource Type:
- Courseware
-
Courseware
Have you ever wondered what it takes to get your train on the right platform at the scheduled time every day? Understanding the complexity behind today’s sophisticated railway systems will give you a better insight into how this safe and reliable transportation system works. We will show you the many factors which are involved and how multiple people, behind the scenes, have a daily task that enables you to get from home to work. Journey with us into the world of rail – a complex system that connects people, cities and countries. Railway systems entail much more than a train and a track. They are based on advanced technical and operational solutions, dealing with continuously changing demands for more efficient transport for both passengers and freight every day. Each system consists of many components that must be properly integrated: from trains, tracks, stations, signaling and control systems, through monitoring, maintenance and the impact on cities, landscape and people. This integration is the big challenge and the source of many train delays, inconvenient connections and other issues that impact our society. This engineering course attempts to tackle those issues by introducing you to a holistic approach to railway systems engineering. You will learn how the system components depend on each other to create a reliable, efficient and state-of-the-art network.
- Subjects:
- Electrical Engineering and Transportation
- Keywords:
- Railroad engineering
- Resource Type:
- Courseware
-
Courseware
This business and management course will focus on the necessary project management skills to successfully manage projects, distinguishing three areas: the project manager and the team, the project process and the project context. The course focuses on the early project phases, including examples from technical projects within various sectors and industries (amongst others, but not limited to, infrastructure projects and construction projects).
- Keywords:
- Engineering -- Management Project management
- Resource Type:
- Courseware
-
Courseware
Are you an engineer, scientist or technician? Are you dealing with measurements or big data, but are you unsure about how to proceed? This is the course that teaches you how to find the best estimates of the unknown parameters from noisy observations. You will also learn how to assess the quality of your results. TU Delft’s approach to observation theory is world leading and based on decades of experience in research and teaching in geodesy and the wider geosciences. The theory, however, can be applied to all the engineering sciences where measurements are used to estimate unknown parameters. The course introduces a standardized approach for parameter estimation, using a functional model (relating the observations to the unknown parameters) and a stochastic model (describing the quality of the observations). Using the concepts of least squares and best linear unbiased estimation (BLUE), parameters are estimated and analyzed in terms of precision and significance. The course ends with the concept of overall model test, to check the validity of the parameter estimation results using hypothesis testing. Emphasis is given to develop a standardized way to deal with estimation problems. Most of the course effort will be on examples and exercises from different engineering disciplines, especially in the domain of Earth Sciences. This course is aimed towards Engineering and Earth Sciences students at Bachelor’s, Master’s and postgraduate level.
- Keywords:
- Observers (Control theory) Mathematical statistics
- Resource Type:
- Courseware
-
Courseware
Many of today’s global challenges require tech-driven solutions — climate change, the growth of the world population, cyber security, the increasing demand for scarce resources, digitalization, the transition from fossil fuels to renewable energy. With this in mind, it is no surprise that one fourth of the CEOs of the world’s 100 largest corporations have an engineering degree. Solving these global problems requires leaders who, in the first place, are comfortable with technology, models and quantitative analyses — Leaders who see systems instead of isolated problems. However, simply understanding technology is not enough. Successful leaders today must have both the ideas and the know-how to put these ideas into action by working collaboratively with others, winning their hearts and minds. We need leaders who know how to seize opportunities in a networked world, and can mobilize people and other stakeholders for large-scale change. Leaders who lead fulfilling lives and who are able to move themselves and others from the ‘me’ to the ‘we’. Leaders who are long-term oriented and who deliver economic profit, while also making positive contributions to society and the environment. We call these leaders ‘sustainable leaders’. This course has three parts: - In the first part, you will explore the context that leaders are facing, building an understanding of the complexities of global and business challenges. You will discover the ambiguities and the many stakeholders that leaders must consider when making their choices. You will get a sense of effective leadership practices. - In the second part, you will discover your “who am I” through personal and group exercises. You will create a “Personal Charter” that can serve as a life-long guide, helping you, as a leader, to make important choices in your personal and professional life. - In the third part, we will bring the knowledge of the context and yourself together. We will translate the insights of this course into a leadership model and you will discover what sustainable leaders do. We will offer you frameworks to help you make your own career choices. We will finally help you to ‘sell’ yourself as a leader.
- Subjects:
- Management
- Keywords:
- Leadership Engineering -- Management Engineers
- Resource Type:
- Courseware
-
Courseware
Broadly speaking, functional programming is a style of programming in which the primary method of computation is the application of functions to arguments. Among other features, functional languages offer a compact notation for writing programs, powerful abstraction methods for structuring programs, and a simple mathematical basis that supports reasoning about programs. Functional languages represent the leading edge of programming language design, and the primary setting in which new programming concepts are introduced and studied. All contemporary programming languages such as Hack/PHP, C#, Visual Basic, F#, C++, JavaScript, Python, Ruby, Java, Scala, Clojure, Groovy, Racket, … support higher-order programming via the concept of closures or lambda expressions. This course will use Haskell as the medium for understanding the basic principles of functional programming. While the specific language isn’t all that important, Haskell is a pure functional language so it is entirely appropriate for learning the essential ingredients of programming using mathematical functions. It is also a relatively small language, and hence it should be easy for you to get up to speed with Haskell. Once you understand the Why, What and How that underlies pure functional programming and learned to “think like a fundamentalist”, we will apply the concepts of functional programming to “code like a hacker” in mainstream programming languages, using Facebook’s novel Hack language as our main example. This course assumes no prior knowledge of functional programming, but assumes you have at least one year of programming experience in a regular programming language such as Java, .NET, Javascript or PHP.
- Subjects:
- Computing
- Keywords:
- Haskell (Computer program language) Functional programming (Computer science)
- Resource Type:
- Courseware
-
Courseware
This course introduces the structural and material design of aircraft. Students will see and understand how aircraft and spacecraft are manufactured, and learn how safety is enshrined at every stage. Experts from the Aerospace Structures and Materials Department of Delft University of Technology will help you explore and analyze the mechanical properties of materials; learning about manufacturing techniques, fatigue, loads and stresses, design considerations and more – all the scientific and engineering principles that structural and materials engineers face on a daily basis.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Space vehicles -- Materials Airplanes -- Materials Aerospace engineering
- Resource Type:
- Courseware
-
Courseware
This part of the course Introduction to Aerospace Engineering is focused on two aerospace disciplines: “space and orbital mechanics” and “structures and materials”. These topics are discussed in detail and will provide an understanding for both aircraft and for spacecraft/space missions.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Orbital mechanics Space vehicles -- Materials Airplanes -- Materials Aerospace engineering
- Resource Type:
- Courseware
-
Courseware
This course provides an overview of and an introduction to the fundamentals of aeronautics, using the history of aviation as a story line. The course uses examples from the very beginning of aviation (the Montgolfier brothers’ balloon flight in 1783 and the Wright brothers’ heavier-than-air flight in 1903) and continues all the way through to the current Airbus A380 and future aircraft. This trajectory will start with a general introduction to aeronautics, to be followed by a closer look at aerodynamics and flight performance.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Aerospace engineering Airplanes Aeronautics Aerodynamics
- Resource Type:
- Courseware
-
Courseware
What do collapsed buildings, infected hospital patients, and crashed airplanes have in common? If you know the causes of these events and conditions, they can all be prevented. In this course, you will learn how to use the TU Delft mind-set to investigate the causes of such events so you can prevent them in the future. When, for instance, hundreds of hospital patients worldwide got infected after having gall bladder treatments, forensic engineering helped reveal how the design and use of the medical instruments could cause such widespread infections. As a result, changes were made to the instrument design and the procedural protocols in hospitals. Learning from failure in this case benefitted patient health and safety across the world. After taking this course you will have an understanding of failures and the investigation processes used to find their causes. You will learn how to apply lessons gained from investigating previous failures into new designs and procedures.
- Keywords:
- Forensic engineering Failure analysis (Engineering)
- Resource Type:
- Courseware
-
Courseware
The following topics are covered: 1. Turning performance (three dimensional equations of motion, coordinate systems, Euler angles, transformation matrices) 2. Airfield performance (take-off and landing) 3. Unsteady climb and descent (including minimum time to climb problem) 4. Cruise flight and transport performance 5. Equations of motion with a wind gradient present 6. Equations of motion applied to various phases of space flight 7. Launch, Vertical flight, delta-V budget, burn out height, staging 8. Gravity perturbations to satellite orbits, J2 effect for low earth orbit satellites, J2,2 effect for Geostationary Earth Orbit sattelites leading to contribution in ï„V budget 9. Patched conics approach for interplanetary flight, gravity assist effect / options for change of excess velocity (2d, 3d), Launch, in orbit insertion.
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Aerodynamics Astrodynamics
- Resource Type:
- Courseware
-
Courseware
Are you an entrepreneur, or do you have a passion for building your own technology startup? This course will help and encourage you to start a successful technology-based venture. If you always wanted to become an entrepreneur, or if you are simply interested in putting a new technology to innovative use, this course is for you. This course helps you understand the process of entrepreneurship from a technology-oriented background. The course is made up of modules that are presented by experts in the field of entrepreneurship and technology. Modules include: - Team Building - Opportunity Recognition - Financing - Customer Acquisition
- Subjects:
- Management
- Keywords:
- Technological innovations -- Economic aspects Entrepreneurship High technology industries -- Management
- Resource Type:
- Courseware
-
Courseware
This course is an introduction to power electronics. First the principles of power conversion with switching circuits are treated as well as main applications of power electronics. Next the basic circuits of power electronics are explained, including ac-dc converters (diode rectifiers), dc-dc converters (non-isolated and isolated) and dc-ac converters (inverters). Related issues such as pulse width modulation, methods of analysis, voltage distortion and power quality are treated in conjunction with the basic circuits. The main principles of operation of most commonly used power semiconductor switches are explained. Finally, the role of power electronics in sustainable energy future, including renewable energy systems and energy efficiency is discussed.
- Subjects:
- Electrical Engineering
- Keywords:
- Electronic circuits Power electronics
- Resource Type:
- Courseware
-
Courseware
This course is a basic course on Instrumentation and Measurement. Firstly, the detection limit in a typical instrument for measurement of an electrical quantity is determined for: offset, finite common-mode rejection, noise and interference. The dominant source of uncertainty is identified and the equivalent input voltage/current sources are calculated. Secondly, the measurement of a non-electrical quantity is discussed. In this case the detection limit should be expressed in terms of the non-electrical input parameter of interest. Issues discussed are: (cross-)sensitivities in frequently used transduction effects, non-electrical source loading and noise in the non-electrical signal domain. Coupled domain formal modeling is subsequently introduced to facilitate analytical multi-domain system analysis. Finally, the detection limit in typical applications in the mechanical, thermal, optical and magnetic signal domain are analysed, along with circuit and system techniques to maximize overall system detectivity. The tools that are introduced in the course, such as the formal modeling and the calculation of the detection limit, are applied in the mid-term project to a real-world measurement problem.
- Subjects:
- Electrical Engineering
- Keywords:
- Electronic instruments Electronic measurements
- Resource Type:
- Courseware
-
Courseware
The course gives an overview of different types of electrical machines and drives. Different types of mechanica loads are discussed. Maxwell’s equations are applied to magnetic circuits including permanent magnets. DC machines, induction machines, synchronous machines, switched reluctance machines, brushless DC machines and single-phase machines are discussed with the power electronic converters used to drive them.
- Subjects:
- Electrical Engineering
- Keywords:
- Electric driving Electric machinery
- Resource Type:
- Courseware
-
Courseware
This course focuses on the technology behind electric cars. You will explore the working principle of electric vehicles, delve into the key roles played by motors and power electronics, learn about battery technology, EV charging, smart charging and about future trends in the development of electric cars.
- Subjects:
- Electrical Engineering
- Keywords:
- Electric vehicles Electric vehicles -- Batteries
- Resource Type:
- Courseware
-
Courseware
This course explores the most important aspects of this new market, including state-of-the-art technology of electric vehicles and charging infrastructure; profitable business models for electric mobility; and effective policies for governmental bodies, which will accelerate the uptake of electric mobility.
- Subjects:
- Electrical Engineering
- Keywords:
- Electric vehicles
- Resource Type:
- Courseware
-
Courseware
This course explains how electric mobility can work for various businesses, including fleet managers, automobile manufacturers and charging infrastructure providers. The experts of TU Delft, together with other knowledge institutes and companies in the Netherlands, will provide insights into and examples of how innovations have disrupted conventional businesses and created new businesses altogether. This will be explained through various concepts and models, including total cost of ownership models, lean mass production, value chain thinking and business integration.
- Subjects:
- Electrical Engineering
- Keywords:
- Electric vehicles Electric vehicle industry
- Resource Type:
- Courseware
-
Courseware
The course treats: the discrete Fourier Transform (DFT), the Fast Fourier Transform (FFT), their application in OFDM and DSL; elements of estimation theory and their application in communications; linear prediction, parametric methods, the Yule-Walker equations, the Levinson algorithm, the Schur algorithm; detection and estimation filters; non-parametric estimation; selective filtering, application to beamforming.
- Subjects:
- Electrical Engineering
- Keywords:
- Signal processing
- Resource Type:
- Courseware
-
Courseware
This course covers the main tasks required from data analysts today, including importing, summarizing, interpreting, analyzing and visualizing data. It aims to equip you with the tools that will enable you to be an independent data analyst. Most techniques will be taught in Excel with add-ons and free tools available online. You will learn: - How to make data come to life with well-known types of visualizations such as line and bar graphs and new types of visualizations such as spark lines, contour plots and population pyramids. - How to create dashboards in Excel based on live data that can meet managerial and business needs. - How to connect data from different sources, such as the web and exports from your CRM, ERP, SAP or data warehouse. - Some hands-on data science and how to use actionable analysis tools. - Deep dive into known tools like PivotTables and introduce new ones like the analysis toolpak
-
Courseware
This course is for all of those struggling with data analysis. You will learn: - Overcome data analysis challenges in your work and research - Increase your productivity and make better business decisions - Enhance your data analysis skills using spreadsheets - Learn about advanced spreadsheet possibilities like array formulas and pivottables - Learn about Excel 2013 features like PowerPivot & PowerMap - Learn to organize and test your spreadsheets
-
Courseware
Are you ready to leave the sandbox and go for the real deal? Have you followed Data Analysis: Take It to the MAX() and Data Analysis: Visualization and Dashboard Design and are ready to carry out more robust data analysis? In this project-based course you will engage in a real data analysis project that simulates the complexity and challenges of data analysts at work. Testing, data wrangling, Pivot Tables, sparklines? Now that you have mastered them you are ready to apply them all and carry out an independent data analysis. For your project, you will pick one raw dataset out of several options, which you will turn into a dashboard. You will begin with a business question that is related to the dataset that you choose. The datasets will touch upon different business domains, such as revenue management, call-center management, investment, etc.
- Subjects:
- Computing
- Keywords:
- Visual analytics Information visualization Industrial management -- Data processing Dashboards (Management information systems)
- Resource Type:
- Courseware
-
Courseware
This course explores the Circular Economy: how businesses can create value by reusing and recycling products, how designers can come up with amazingly clever solutions, and how you can contribute to make the Circular Economy happen.
- Subjects:
- Management and Industrial and Systems Engineering
- Keywords:
- Sustainable development Industrial management -- Environmental aspects Environmental economics
- Resource Type:
- Courseware
-
Courseware
The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. The course includes the following topics: - Equations of motion, nonlinear equilibrium equations, stationary potential energy criterion. - Stability analysis for the basic structural elements. - Design methods for stability of basic structural elements.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Buckling (Mechanics) Structural stability
- Resource Type:
- Courseware
-
Courseware
This course presents a design philosophy and a design approach, dedicated to rehabilitation technology. This field was selected because of human-machine interaction is inherent and vital. Illustrative examples will be discussed by their entire design proces.
- Subjects:
- Biomedical Engineering
- Keywords:
- Rehabilitation technology Biomedical engineering Medical instruments apparatus -- Design construction
- Resource Type:
- Courseware
-
Courseware
Biomechatronics is a contraction of biomechanics and mechatronics. In this course the function and coordination of the human motion apparatus is the central focus, and the design of assistive devices for the support of the function of the motion apparatus.
- Subjects:
- Biomedical Engineering
- Keywords:
- Medical instruments apparatus Mechatronics Biomedical engineering Robotics
- Resource Type:
- Courseware
-
Courseware
While big data infiltrates all walks of life, most firms have not changed sufficiently to meet the challenges that come with it. In this course, you will learn how to develop a big data strategy, transform your business model and your organization. This course will enable professionals to take their organization and their own career to the next level, regardless of their background and position. Professionals will learn how to be in charge of big data instead of being subject to it. In particular, they will become familiar with tools to: - assess their current situation regarding potential big data-induced changes of a disruptive nature, - identify their options for successfully integrating big data in their strategy, business model and organization, or if not possible, how to exit quickly with as little loss as possible, and - strengthen their own position and that of their organization in our digitalized knowledge economy The course will build on the concepts of product life cycles, the business model canvas, organizational theory and digitalized management jobs (such as Chief Digital Officer or Chief Informatics Officer) to help you find the best way to deal with and benefit from big data induced changes. During the course, your most pressing questions will be answered in our feedback videos with the lecturer. In the assignments of the course, you will choose a sector and a stakeholder. For this, you will develop your own strategy and business model. This will help you identify the appropriate organizational structure and potential contributions and positions for yourself.
- Subjects:
- Management and Computing
- Keywords:
- Business -- Data processing Big data
- Resource Type:
- Courseware
-
Courseware
An introductory course in analog circuit synthesis for microelectronic designers. Topics include: Review of analog design basics; linear and non-linear analog building blocks: harmonic oscillators, (static and dynamic) translinear circuits, wideband amplifiers, filters; physical layout for robust analog circuits; design of voltage sources ranging from simple voltage dividers to high-performance bandgaps, and current source implementations from a single resistor to high-quality references based on negative-feedback structures.
- Subjects:
- Electrical Engineering
- Keywords:
- Analog integrated circuits
- Resource Type:
- Courseware
-
Courseware
This course treats various methods to design and analyze datastructures and algorithms for a wide range of problems. The most important new datastructure treated is the graph, and the general methods introduced are: greedy algorithms, divide and conquer, dynamic programming and network flow algorithms. These general methods are explained by a number of concrete examples, such as simple scheduling algorithms, Dijkstra, Ford-Fulkerson, minimum spanning tree, closest-pair-of-points, knapsack, and Bellman-Ford. Throughout this course there is significant attention to proving the correctness of the discussed algorithms. All material for this course is in English. The recorded lectures, however, are in Dutch.
- Subjects:
- Computing
- Keywords:
- Algorithms Data structures (Computer science)
- Resource Type:
- Courseware
-
Courseware
Welcome to this course of Aerospace Mechanics of Materials. We are happy that you chose to join us on this exciting journey. This course deals with basic material and geometry dependent analysis of structures. In this course, you will investigate how these material properties, in combination with structural geometries, affect the design and performance of basic structural elements under axial, torsion, bending and shear loading. We have divided this course into eight different subjects and a review chapter. In those subject, you will find video lectures and readings, where the concepts and theory will be explained; examples, where we will solve a problem for you, so you can reinforce the concepts you have learned; and exercises, that will allow you to test your knowledge.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Mechanics Applied Aerospace engineering Mechanical engineering Strength of materials Materials
- Resource Type:
- Courseware
-
Courseware
In this engineering course, you will learn about the engineering principles that play an important role in all of these and more phenomena. You will learn about microbalances, radiation, convection, diffusion and more and their applications in everyday life. This advanced course is for engineers who want to refresh their knowledge, engineering students who are eager to learn more about heat/mass transport and for all who have fun in explaining the science of phenomena in nature.
- Subjects:
- Mechanical Engineering
- Keywords:
- Transport theory Energy transfer Heat -- Transmission Mass transfer
- Resource Type:
- Courseware
-
Courseware
This course is designed to introduce students who wish to specialize in stress analysis of thin-walled structures to more advanced topics such as the analysis of statically indeterminate structures, warping, constraint stresses, shear diffusion, and elements of plate bending.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Airframes Structural analysis (Engineering)
- Resource Type:
- Courseware
-
Courseware
This course will focus for a large part on MOSFET and CMOS, but also on heterojunction BJT, and photonic devices.First non-ideal characteristics of MOSFETs will be discussed, like channel-length modulation and short-channel effects. We will also pay attention to threshold voltage modification by varying the dopant concentration. Further, MOS scaling will be discussed. A combination of an n-channel and p-channel MOSFET is used for CMOS devices that form the basis for current digital technology. The operation of a CMOS inverter will be explained. We will explain in more detail how the transfer characteristics relate to the CMOS design.
-
Courseware
This course introduces the basic components of an airframe structure and discusses their use and limitations. The realities of composite design such as the effect of material scatter, environmental knockdowns, and damage knockdowns are discussed and guidelines accounting for these effects and leading to robust designs are presented. The resulting design constraints and predictive tools are applied to real-life design problems in composite structures. A brief revision of lamination theory and failure criteria leads into the development of analytical solutions for typical failure modes for monolithic skins (layup strength, buckling under combined loads and for a variety of boundary conditions) and stiffeners (strength, column buckling under a variety of loads and boundary conditions, local buckling or crippling for one-edge and no-edge-free conditions). These are then combined into stiffened composite structures where additional failure modes such as skin-stiffener separation are considered. Analogous treatment of sandwich skins examines buckling, wrinkling, crimping, intra-cellular buckling failure modes. Once the basic analysis and design techniques have been presented, typical designs (e.g. flange layup, stiffness, taper requirements) are presented and a series of design guidelines (stiffness mismatch minimization, symmetric and balanced layups, 10% rule, etc.) addressing layup and geometry are discussed. On the metal side, the corresponding design practices and analysis methods are presented for the more important failure modes (buckling, crippling) and comparisons to composite designs are made. A design problem is given in the end as an application of the material in this Part of the course.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Composite construction Airframes
- Resource Type:
- Courseware