Search Constraints
Number of results to display per page
Results for:
Affiliation
Delft University of Technology
Remove constraint Affiliation: Delft University of Technology
Year
2016
Remove constraint Year: 2016
« Previous |
21 - 29 of 29
|
Next »
Search Results
-
Courseware
This part of the course Introduction to Aerospace Engineering is focused on two aerospace disciplines: “space and orbital mechanics” and “structures and materials”. These topics are discussed in detail and will provide an understanding for both aircraft and for spacecraft/space missions.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Orbital mechanics Space vehicles -- Materials Airplanes -- Materials Aerospace engineering
- Resource Type:
- Courseware
-
Courseware
The following topics are covered: 1. Turning performance (three dimensional equations of motion, coordinate systems, Euler angles, transformation matrices) 2. Airfield performance (take-off and landing) 3. Unsteady climb and descent (including minimum time to climb problem) 4. Cruise flight and transport performance 5. Equations of motion with a wind gradient present 6. Equations of motion applied to various phases of space flight 7. Launch, Vertical flight, delta-V budget, burn out height, staging 8. Gravity perturbations to satellite orbits, J2 effect for low earth orbit satellites, J2,2 effect for Geostationary Earth Orbit sattelites leading to contribution in ï„V budget 9. Patched conics approach for interplanetary flight, gravity assist effect / options for change of excess velocity (2d, 3d), Launch, in orbit insertion.
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Aerodynamics Astrodynamics
- Resource Type:
- Courseware
-
Courseware
The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. The course includes the following topics: - Equations of motion, nonlinear equilibrium equations, stationary potential energy criterion. - Stability analysis for the basic structural elements. - Design methods for stability of basic structural elements.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Buckling (Mechanics) Structural stability
- Resource Type:
- Courseware
-
Courseware
This course presents a design philosophy and a design approach, dedicated to rehabilitation technology. This field was selected because of human-machine interaction is inherent and vital. Illustrative examples will be discussed by their entire design proces.
- Subjects:
- Biomedical Engineering
- Keywords:
- Rehabilitation technology Biomedical engineering Medical instruments apparatus -- Design construction
- Resource Type:
- Courseware
-
Courseware
Biomechatronics is a contraction of biomechanics and mechatronics. In this course the function and coordination of the human motion apparatus is the central focus, and the design of assistive devices for the support of the function of the motion apparatus.
- Subjects:
- Biomedical Engineering
- Keywords:
- Medical instruments apparatus Mechatronics Biomedical engineering Robotics
- Resource Type:
- Courseware
-
Courseware
This course treats various methods to design and analyze datastructures and algorithms for a wide range of problems. The most important new datastructure treated is the graph, and the general methods introduced are: greedy algorithms, divide and conquer, dynamic programming and network flow algorithms. These general methods are explained by a number of concrete examples, such as simple scheduling algorithms, Dijkstra, Ford-Fulkerson, minimum spanning tree, closest-pair-of-points, knapsack, and Bellman-Ford. Throughout this course there is significant attention to proving the correctness of the discussed algorithms. All material for this course is in English. The recorded lectures, however, are in Dutch.
- Subjects:
- Computing
- Keywords:
- Algorithms Data structures (Computer science)
- Resource Type:
- Courseware
-
Courseware
Welcome to this course of Aerospace Mechanics of Materials. We are happy that you chose to join us on this exciting journey. This course deals with basic material and geometry dependent analysis of structures. In this course, you will investigate how these material properties, in combination with structural geometries, affect the design and performance of basic structural elements under axial, torsion, bending and shear loading. We have divided this course into eight different subjects and a review chapter. In those subject, you will find video lectures and readings, where the concepts and theory will be explained; examples, where we will solve a problem for you, so you can reinforce the concepts you have learned; and exercises, that will allow you to test your knowledge.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Mechanics Applied Aerospace engineering Mechanical engineering Strength of materials Materials
- Resource Type:
- Courseware
-
Courseware
This course is designed to introduce students who wish to specialize in stress analysis of thin-walled structures to more advanced topics such as the analysis of statically indeterminate structures, warping, constraint stresses, shear diffusion, and elements of plate bending.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Airframes Structural analysis (Engineering)
- Resource Type:
- Courseware
-
Courseware
This course introduces the basic components of an airframe structure and discusses their use and limitations. The realities of composite design such as the effect of material scatter, environmental knockdowns, and damage knockdowns are discussed and guidelines accounting for these effects and leading to robust designs are presented. The resulting design constraints and predictive tools are applied to real-life design problems in composite structures. A brief revision of lamination theory and failure criteria leads into the development of analytical solutions for typical failure modes for monolithic skins (layup strength, buckling under combined loads and for a variety of boundary conditions) and stiffeners (strength, column buckling under a variety of loads and boundary conditions, local buckling or crippling for one-edge and no-edge-free conditions). These are then combined into stiffened composite structures where additional failure modes such as skin-stiffener separation are considered. Analogous treatment of sandwich skins examines buckling, wrinkling, crimping, intra-cellular buckling failure modes. Once the basic analysis and design techniques have been presented, typical designs (e.g. flange layup, stiffness, taper requirements) are presented and a series of design guidelines (stiffness mismatch minimization, symmetric and balanced layups, 10% rule, etc.) addressing layup and geometry are discussed. On the metal side, the corresponding design practices and analysis methods are presented for the more important failure modes (buckling, crippling) and comparisons to composite designs are made. A design problem is given in the end as an application of the material in this Part of the course.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Composite construction Airframes
- Resource Type:
- Courseware
- « Previous
- Next »
- 1
- 2
- 3