Search Constraints
Number of results to display per page
Results for:
Polyu oer sim
No
Remove constraint Polyu oer sim: No
« Previous |
1 - 20 of 29
|
Next »
Search Results
-
Courseware
Design of shoreline protection along rivers, canals and the sea; load on bed and shoreline by currents, wind waves and ship motion; stability of elements under current and wave conditions; stability of shore protection elements; design methods, construction methods. Flow: recapitulation of basics from fluid mechanics (flow, turbulence), stability of individual grains (sand, but also rock) in different type of flow conditions (weirs, jets), scour and erosion. Porous Media: basic equation, pressures and velocities on the stability on the boundary layer; groundwater flow with impermeable and semi-impermeable structures; granular filters and geotextiles. Waves: recapitulation of the basics of waves, focus on wave forces on the land-water boundary, specific aspects of ship induced waves, stability of elements under wave action (loose rock, placed blocks, impermeable layers) Design: overview of the various types of protections, construction and maintenance; design requirements, deterministic and probabilistic design; case studies, examples Materials and environment: overview of materials to be used, teraction with the aquatic environment, role of the land-water boundary as part of the ecosystem; environmentally sound shoreline design.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Shore protection Coast defenses
- Resource Type:
- Courseware
-
Courseware
Design and construction of breakwaters and closure dams in estuaries and rivers. Functional requirements, determination of boundary conditions, spatial and constructional design and construction aspects of breakwaters and dams consisting of rock, sand and caissons. Overview and history of breakwater and closure dam construction. The general design principles of a breakwater and a closure dam. Determination of boundary conditions for dams and breakwaters, with special attention to the design frequency. Methods to determine the design wave height from wave statistics. Overview of other boundary conditions (geotechnical and hydraulic). Materials, quarries and rock properties. Various properties of the different types of dams and breakwaters, like stability of riprap in current and wave conditions, design of armour layer, natural rock and concrete elements. The use of caissons for breakwaters and closure dams. Computation of element size using classical formulae, partial safety coefficients and probabilistic methods. Plan and cross section of breakwaters. Practical examples of breakwaters and closure dams. Execution (marine or land based equipment) of the works. Failure mechanisms and (cost) optimisation. One-week exercise in which a group of two or three students has to design a breakwater and a closure dam.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Tidal basins Breakwaters -- Design construction River channels Dams -- Design construction
- Resource Type:
- Courseware
-
Video
This video gives a brief overview of this ingenious method of compressing air using only the power of water. The way a trompe harnesses the power of water to generate compressed air with no moving parts is fascinating and its use is seeing a small revival in modern days. A trompe can be useful in off-grid aquaponics and hydroponic systems that need aeration of the water. And, in fact, the inspiration for this video came from the late Bruce Leavitt, a mining engineer who pioneered the use of small trompes for aeration and treatment of mining water in remote locations without access to electricity.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Air-compressors Compressed air Water-power Fluid dynamics
- Resource Type:
- Video
-
Courseware
The course gives the technological backgrounds of treatment processes applied for production of drinking water. The treatment processes are demonstrated with laboratory experiments. Study goals: Knowledge of technological basics and design parameters of drinking water treatment processes.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water -- Purification Drinking water -- Purification
- Resource Type:
- Courseware
-
Courseware
This course deals with the design of drinking water treatment plants. Theory is discussed and a design exercise is made. Study goals: Understanding of design aspects and design details.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water -- Purification Water treatment plants -- Design construction Drinking water -- Purification
- Resource Type:
- Courseware
-
Courseware
If you’re interested in the concept of building with nature, then this is the engineering course for you. This course explores the use of natural materials and ecological processes in achieving effective and sustainable hydraulic infrastructural designs. You will learn the Building with Nature ecosystem-based design concept and its applications in water and coastal systems. During the course, you will be presented with a range of case studies to deepen your knowledge of ecological and engineering principles. You’ll learn from leading Dutch engineers and environmental scientists who see the Building with Nature integrated design approach as fundamental to a new generation of engineers and ecologists. Join us in exploring the interface between hydraulic engineering, nature and society.
- Subjects:
- Building Services Engineering and Hydraulic Engineering
- Keywords:
- Sustainable development Hydraulic engineering Water resources development -- Environmental aspects
- Resource Type:
- Courseware
-
Video
We normally build a dam to hold water back and store it for use in water supply, irrigation, hydropower, or flood control. But sometimes we have to let some water go. Whether we need it downstream or the impounded water behind the dam is simply too full to store any more, nearly every dam needs a spillway to safely discharge water. The spillway is a critical part of any dam and often the most complex component. So how does it work?
- Subjects:
- Hydraulic Engineering
- Keywords:
- Hydraulic structures Spillways Dams Reservoirs Diversion structures (Hydraulic engineering)
- Resource Type:
- Video
-
Video
This video gives a quick description and demo of this ingenious pump. A hydraulic ram is a clever device invented over 200 years ago that can pump water uphill with no other external source of power except for the water flowing into it and there is a way to take advantage of this normally inauspicious effect for a beneficial use. The ram pump is an ingenious way to take advantage of the properties of fluids. We all need water for a variety of reasons, so being able to move it where we need it without any fancy equipment or external sources of power is a pretty nice tool to have in your toolbox.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Hydraulic rams Pumping machinery
- Resource Type:
- Video
-
Video
In civil engineering, quicksand is more than just a puddle of mud! The "quick condition" occurs when seepage reduces the effective stress of a soil. This can lead to some dangerous conditions, especially if the seepage causes piping erosion to occur at a dam.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Seepage Dam failures Quicks Fluid mechanics
- Resource Type:
- Video
-
Video
This video gives a quick overview of how we build underwater structures. Oceans, rivers, and lakes are often beautiful, but they’re not necessarily convenient places to build things. Yet, many types of the infrastructure we depend on every day, including wharves, bridges, and dams, are founded below the water. How do they do it? On this episode, we're talking about different types of underwater construction, including cofferdams, diversions, caissons, and drilled shafts. Whether the construction site is on the bottom of a lake or river, or simply located in the floodplain and only at risk during extreme weather, engineers and construction contractors put a significant amount of thought and consideration into the feasibility and costs of managing this water.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Underwater construction Hydraulic engineering
- Resource Type:
- Video
-
Courseware
This course discusses the requirement, interpretation, methods and design of hydrological measurements. Following topics are covered: Accuracy requirements of measurements and error propagation: Related to a problem the required accuracy of measurements and the consequences for accuracy in the final result are discussed. Different types of errors are handled. Propagation of errors; for dependent and independent measurements, from mathematical relations and regression is demonstrated. Recapitulated is the theory of regression and correlation. Interpretation of measurements, data completion: By standard statistical methods screening of measured data is performed; double mass analysis, residual mass, simple rainfall-runoff modelling. Detection of trends; split record tests, Spearman rank tests. Methods to fill data gaps and do filtering on data series for noise reduction. Methods of hydrological measurements and measuring equipment: To determine quantitatively the most important elements in the hydrological cycle an overview is presented of most common hydrological measurements, measuring equipment and indirect determination methods i.e. for precipitation, evaporation, transpiration, river discharge and groundwater tables. Use, purpose and measurement techniques for tracers in hydrology is discussed. Advantages and disadvantages and specific condition/application of methods are discussed. Equipment is demonstrated and discussed. Areal distributed observation: Areal interpolation techniques of point observations; inverse distance, Thiessen, contouring, Kriging. Comparison of interpolation techniques and estimation of errors. Correlation analysis of areal distributed observation of rainfall. Design of measuring networks: Based on correlation characteristics from point measurements (e.g. rainfall stations) and accuracy requirements the design of a network of stations is demonstrated.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Hydrology -- Measurement Hydrology
- Resource Type:
- Courseware
-
Courseware
The course deals with the principles of hydrology of catchment areas, rivers and deltas.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Watersheds Estuaries Saline water barriers Hydrology Floods Rivers
- Resource Type:
- Courseware
-
Courseware
The lectures introduce a number of topics that are important for IWRM and the modeling exercise. The lectures introduce water management issues in the Netherlands, Rhine Basin, and Volta Basin. The role-play is meant to experience some of the social processes that, together with technical knowledge, determine water management.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water resources development Netherls Water-supply -- Management Water-supply
- Resource Type:
- Courseware
-
Courseware
Learn about urban water services, focusing on conventional technologies for drinking water treatment. This course focuses on conventional technologies for drinking water treatment. Unit processes, involved in the treatment chain, are discussed as well as the physical, chemical and biological processes involved. The emphasis is on the effect of treatment on water quality and the dimensions of the unit processes in the treatment chain. After the course one should be able to recognise the process units, describe their function, and make basic calculations for a preliminary design of a drinking water treatment plant.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water -- Purification Water treatment plants -- Design construction Drinking water -- Purification Water-supply
- Resource Type:
- Courseware
-
Courseware
Water is essential for life on earth and of crucial importance for society. Also within our climate water plays a major role. The natural cycle of ocean to atmosphere, by precipitation back to earth and by rivers and aquifers to the oceans has a decisive impact on regional and global climate patterns. This course will cover six main topics: 1. Global water cycle. In this module you will learn to explain the different processes of the global water cycle. 2. Water systems. In this module you will learn to describe the flows of water and sand in different riverine, coastal and ocean systems. 3. Water and climate change. In this module you will learn to identify mechanisms of climate change and you will learn to explain the interplay of climate change, sea level, clouds, rainfall and future weather. 4. Interventions. In this module you will learn to explain why, when and which engineering interventions are needed in rivers, coast and urban environment. 5. Water resource management. In this module you will learn to explain why water for food and water for cities are the main challenges in water management and what the possibilities and limitations of reservoirs and groundwater are to improve water availability. 6. Challenges. In this module you will learn to explain the challenges in better understanding and adapting to the impact of climate change on water for the coming 50 years.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Hydrologic cycle Water-supply -- Effect of global warming on Water-supply -- Management
- Resource Type:
- Courseware
-
Courseware
The course will discuss the objectives and functions of water management systems for irrigation and drainage purposes. Analysing system requirements in terms of technical engineering constraints, management possibilities and water users (wishes and options) is central. This includes the design and operation of regulation structures, dams, reservoirs, weirs and conveyance systems; balancing water supply and water requirements in time and space is a main focus of analysis too.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Drainage -- Management Irrigation -- Management
- Resource Type:
- Courseware
-
Courseware
Offshore Hydromechanics includes the following modules: 1. Hydrostatics, static floating stability, constant 2-D potential flow of ideal fluids, and flows in real fluids. Introduction to resistance and propulsion of ships. Review of linear regular and irregular wave theory. 2. Analytical and numerical means to determine the flow around, forces on, and motions of floating bodies in waves. 3. Higher order potential theory and inclusion of non-linear effects in ship motions. Applications to motion of moored ships and to the determination of workability. 4. Interaction between the sea and sea bottom as well as the hydrodynamic forces and especially survival loads on slender structures.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Offshore structures -- Hydrodynamics Hydrostatics Fluid mechanics
- Resource Type:
- Courseware
-
Courseware
Basic principles: Hydrostatics, constant flow phenomena and waves The treated theory includes: - Archimedes’ Law, hydrostatic pressure - Stability computations for floating structures – including the effect of shifting loads, and partially filled fluid tanks - Potential flow basics, 2D potential flow elements, superposition principle - Real (viscous) flows, scaling laws, flow regimes - Fluid forces on structures, drag and lift, resistance and propulsion, wind and current loads - Linear wave theory in regular and irregular waves and wave statistics
- Subjects:
- Hydraulic Engineering
- Keywords:
- Offshore structures -- Hydrodynamics Hydrodynamics Hydrostatics Fluid mechanics Waves
- Resource Type:
- Courseware
-
Courseware
Part 2 of offshore hydromechanics (OE4630) involves the linear theory of calculating 1st order motions of floating structures in waves and all relevant subjects such as the concept of RAOs, response spectra and downtime/workability analysis.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Offshore structures -- Hydrodynamics Hydrostatics Fluid mechanics
- Resource Type:
- Courseware
-
Courseware
Water transport through pipes, pressure losses, (pressure) network design and building, pump selection, pumping stations, power supply, quantitative reliability, operation and maintenance. Studie goals: The student will acquire the ability to: design a transportation network, identify critical situations for water hammer design a pumping station in terms of capacity, lay out and operation of pumps analyse a lopped and branched pipe system, analyse a drinking water system with ALEID or EPANET and a sewer system with HYDROWORKS, identify critical areas for water quality deterioration, analyse the reliability of a drinking water system and identify critical elements as well as formulate solutions to these points.
- Subjects:
- Building Services Engineering and Hydraulic Engineering
- Keywords:
- Water quality management Drinking water Pipelines Pumping stations Hydraulic structures -- Design construction
- Resource Type:
- Courseware