Search Constraints
Number of results to display per page
Results for:
« Previous |
1 - 20 of 53
|
Next »
Search Results
-
Video
PolyU AAE students guide you through the flight procedures of an A320 Flight Stimulator.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Flight training -- Simulation methods Flight simulators
- Resource Type:
- Video
-
Courseware
This course introduces the basic components of an airframe structure and discusses their use and limitations. The realities of composite design such as the effect of material scatter, environmental knockdowns, and damage knockdowns are discussed and guidelines accounting for these effects and leading to robust designs are presented. The resulting design constraints and predictive tools are applied to real-life design problems in composite structures. A brief revision of lamination theory and failure criteria leads into the development of analytical solutions for typical failure modes for monolithic skins (layup strength, buckling under combined loads and for a variety of boundary conditions) and stiffeners (strength, column buckling under a variety of loads and boundary conditions, local buckling or crippling for one-edge and no-edge-free conditions). These are then combined into stiffened composite structures where additional failure modes such as skin-stiffener separation are considered. Analogous treatment of sandwich skins examines buckling, wrinkling, crimping, intra-cellular buckling failure modes. Once the basic analysis and design techniques have been presented, typical designs (e.g. flange layup, stiffness, taper requirements) are presented and a series of design guidelines (stiffness mismatch minimization, symmetric and balanced layups, 10% rule, etc.) addressing layup and geometry are discussed. On the metal side, the corresponding design practices and analysis methods are presented for the more important failure modes (buckling, crippling) and comparisons to composite designs are made. A design problem is given in the end as an application of the material in this Part of the course.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Composite construction Airframes
- Resource Type:
- Courseware
-
Courseware
This course is designed to introduce students who wish to specialize in stress analysis of thin-walled structures to more advanced topics such as the analysis of statically indeterminate structures, warping, constraint stresses, shear diffusion, and elements of plate bending.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Airframes Structural analysis (Engineering)
- Resource Type:
- Courseware
-
e-book
This book brings together reputable researchers from different countries in order to provide a comprehensive coverage of advanced and modern topics in flight control not yet reflected by other books. This product comprises 14 contributions submitted by 38 authors from 11 different countries and areas. It covers most of the currents main streams of flight control researches, ranging from adaptive flight control mechanism, fault tolerant flight control, acceleration based flight control, helicopter flight control, comparison of flight control systems and fundamentals. According to these themes the contributions are grouped in six categories, corresponding to six parts of the book.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Flight control Automatic pilot (Airplanes)
- Resource Type:
- e-book
-
e-book
This web textbook contains information, data tables and computer programs for the study of aerodynamics, gas dynamics, propulsion, aircraft performance and flight mechanics. Topics relevant to the undergraduate engineering degree at a university level are covered.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Aerodynamics
- Resource Type:
- e-book
-
e-journal
Aerospace is an international, peer-reviewed, open access journal (free for readers) devoted to the publication of original papers, review articles, short notes and communications related to all fields of aerospace science, engineering and technology, disclosing theoretical, fundamental and applied results linked to potential applications that are related to research, design, manufacture, operations, control and maintenance of aircraft and spacecraft.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Aeronautics Astronautics
- Resource Type:
- e-journal
-
Courseware
Welcome to this course of Aerospace Mechanics of Materials. We are happy that you chose to join us on this exciting journey. This course deals with basic material and geometry dependent analysis of structures. In this course, you will investigate how these material properties, in combination with structural geometries, affect the design and performance of basic structural elements under axial, torsion, bending and shear loading. We have divided this course into eight different subjects and a review chapter. In those subject, you will find video lectures and readings, where the concepts and theory will be explained; examples, where we will solve a problem for you, so you can reinforce the concepts you have learned; and exercises, that will allow you to test your knowledge.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Mechanics Applied Aerospace engineering Mechanical engineering Strength of materials Materials
- Resource Type:
- Courseware
-
Video
An online lecture on the topic of "Aerothermodynamics in the Entry, Deceleration, and Landing Phase (EDL) of the Mars Mission".This lecture of “Science World: Exploring Space to Benefit Mankind” Education Programme in the 2021/22 school year for secondary students, which aims to cultivate the interest of local youth in space science and elevate their enthusiasm for participating in the development of space technology.
- Subjects:
- Industrial and Systems Engineering and Aeronautical and Aviation Engineering
- Keywords:
- Aerothermodynamics Space flight to Mars
- Resource Type:
- Video
-
e-book
This book includes nine chapters that demonstrate the multi-disciplinary character of the air traffic control domain.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Air traffic control
- Resource Type:
- e-book
-
Courseware
This class includes a brief review of applied aerodynamics and modern approaches in aircraft stability and control. Topics covered include static stability and trim; stability derivatives and characteristic longitudinal and lateral-directional motions; and physical effects of the wing, fuselage, and tail on aircraft motion. Control methods and systems are discussed, with emphasis on flight vehicle stabilization by classical and modern control techniques; time and frequency domain analysis of control system performance; and human-pilot models and pilot-in-the-loop controls with applications. Other topics covered include V/STOL stability, dynamics, and control during transition from hover to forward flight; parameter sensitivity; and handling quality analysis of aircraft through variable flight conditions. There will be a brief discussion of motion at high angles-of-attack, roll coupling, and other nonlinear flight regimes.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Stability of airplanes Flight control
- Resource Type:
- Courseware
-
Courseware
This course adopts a holistic view of the aircraft as a system, covering: basic systems engineering; cost and weight estimation; basic aircraft performance; safety and reliability; lifecycle topics; aircraft subsystems; risk analysis and management; and system realization.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Airplanes -- Design construction
- Resource Type:
- Courseware
-
Courseware
This course provides an overview of airline management decision processes with a focus on economic issues and their relationship to operations planning models and decision support tools. It emphasizes the application of economic models of demand, pricing, costs, and supply to airline markets and networks, and it examines industry practice and emerging methods for fleet planning, route network design, scheduling, pricing and revenue management.
- Subjects:
- Aeronautical and Aviation Engineering and Hotel, Travel and Tourism
- Keywords:
- Airlines -- Management
- Resource Type:
- Courseware
-
Video
Can renewable energy be adopted to aviation transportation industry? Can our giant planes powered by batteries? This video discusses some possibilities.
- Subjects:
- Environmental Engineering, Aeronautical and Aviation Engineering, and Transportation
- Keywords:
- Renewable energy sources Energy storage Airplanes -- Fuel
- Resource Type:
- Video
-
e-book
This book focuses on a selection of key research areas, such as inertial navigation, control of unmanned aircraft and helicopters, trajectory control of an unmanned space re-entry vehicle, aeroservoelastic control, adaptive flight control, and fault tolerant flight control. This book consists of two major sections. The first section focuses on a literature review and some recent theoretical developments in flight control systems. The second section discusses some concepts of adaptive and fault-tolerant flight control systems. Each technique discussed in this book is illustrated by a relevant example.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Flight control Automatic pilot (Airplanes)
- Resource Type:
- e-book
-
e-book
This book explores issues including airline management and operations, airline business models, airport systems, flight operational procedures, aircraft maintenance, runway safety management systems, and air traffic management.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Airlines -- Management Aeronautics Commercial
- Resource Type:
- e-book
-
e-book
The topic of fluid mechanics is common to several disciplines: mechanical engineering, aerospace engineering, chemical engineering, and civil engineering. In fact, it is also related to disciplines like industrial engineering, and electrical engineering. While the emphasis is somewhat different in this book, the common material is presented and hopefully can be used by all. One can only admire the wonderful advances done by the previous geniuses who work in this field. In this book it is hoped to insert, what and when a certain model is suitable than other models. One of the difference in this book is the insertion of the introduction to multiphase flow. Clearly, multiphase is an advance topic. However, some minimal familiarity can be helpful for many engineers who have to deal with non pure single phase fluid. This book is the third book in the series of POTTO project books. POTTO project books are open content textbooks so everyone are welcome to joint in. The topic of fluid mechanics was chosen just to fill the introduction chapter to compressible flow. During the writing it became apparent that it should be a book in its own right. In writing the chapter on fluid statics, there was a realization that it is the best chapter written on this topic. It is hoped that the other chapters will be as good this one. This book is written in the spirit of my adviser and mentor E.R.G. Eckert. Eckert, aside from his research activity, wrote the book that brought a revolution in the education of the heat transfer. Up to Egret's book, the study of heat transfer was without any dimensional analysis. He wrote his book because he realized that the dimensional analysis utilized by him and his adviser (for the post doc), Ernst Schmidt, and their colleagues, must be taught in engineering classes. His book met strong criticism in which some called to "burn" his book. Today, however, there is no known place in world that does not teach according to Eckert's doctrine. It is assumed that the same kind of individual(s) who criticized Eckert's work will criticize this work. Indeed, the previous book, on compressible flow, met its opposition. For example, anonymous Wikipedia user name EMBaero claimed that the material in the book is plagiarizing, he just doesn't know from where and what. Maybe that was the reason that he felt that is okay to plagiarize the book on Wikipedia. These criticisms will not change the future or the success of the ideas in this work. As a wise person says "don't tell me that it is wrong, show me what is wrong"; this is the only reply. With all the above, it must be emphasized that this book is not expected to revolutionize the field but change some of the way things are taught. The book is organized into several chapters which, as a traditional textbook, deals with a basic introduction to the fluid properties and concepts (under construction). The second chapter deals with Thermodynamics. The third book chapter is a review of mechanics. The next topic is statics. When the Static Chapter was written, this author did not realize that so many new ideas will be inserted into this topic. As traditional texts in this field, ideal flow will be presented with the issue of added mass and added forces (under construction). The classic issue of turbulence (and stability) will be presented. An introduction to multi-phase flow, not a traditional topic, will be presented next (again under construction). The next two chapters will deal with open channel flow and gas dynamics. At this stage, dimensional analysis will be present (again under construction).
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Fluid dynamics Textbooks
- Resource Type:
- e-book
-
Video
An online lecture on the topic of "Beidou Navigation Satellite System and Our Daily Lives".This lecture of “Science World: Exploring Space to Benefit Mankind” Education Programme in the 2021/22 school year for secondary students, which aims to cultivate the interest of local youth in space science and elevate their enthusiasm for participating in the development of space technology.
- Subjects:
- Industrial and Systems Engineering and Aeronautical and Aviation Engineering
- Keywords:
- Global Positioning System
- Resource Type:
- Video
-
Courseware
The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. The course includes the following topics: - Equations of motion, nonlinear equilibrium equations, stationary potential energy criterion. - Stability analysis for the basic structural elements. - Design methods for stability of basic structural elements.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Buckling (Mechanics) Structural stability
- Resource Type:
- Courseware
-
Video
An online lecture on the topic of "Challenges in Developing the Chang’e 5 “Surface Sampling and Packing System".This lecture is suitable for secondary school and university students as well as the general public.
- Subjects:
- Industrial and Systems Engineering and Aeronautical and Aviation Engineering
- Keywords:
- Lunar surface Lunar exploration Space flight to the moon
- Resource Type:
- Video
-
Video
An online lecture on the topic of "China Manned Space".This lecture of “Science World: Exploring Space to Benefit Mankind” Education Programme in the 2021/22 school year for secondary students, which aims to cultivate the interest of local youth in space science and elevate their enthusiasm for participating in the development of space technology.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Manned space flight Exploration of outer space
- Resource Type:
- Video
- « Previous
- Next »
- 1
- 2
- 3