Search Constraints
Number of results to display per page
Results for:
Polyu oer sim
No
Remove constraint Polyu oer sim: No
Resource Type
MOOC
Remove constraint Resource Type: MOOC
« Previous |
1 - 50 of 72
|
Next »
Search Results
-
MOOC
這門課是對中國小說經典《紅樓夢》的分析與詮釋，著重於認識讀者本身與經典間的關係，並從作者的時代背景與社會階層著手，重新剖析這部人所共愛、人各有所擁戴的經典之作。
- Subjects:
- Chinese Literature
- Keywords:
- Hong lou meng (Cao Xueqin) Cao Xueqin approximately 1717-1763
- Resource Type:
- MOOC
-
MOOC
本课分十个专题，分别介绍《周易》、孔子《论语》、老子《道德经》，《大学》与《中庸》，《庄子》，《孙子兵法》，《墨经》，《心经》，以及朱熹理学、王阳明《传习录》等著作和人物的思想。既有对儒释道经典的介绍，也有对理学、心学思想的阐释，以期以一种更广阔的视角看待中国传统哲学，让学生能够对中国传统哲学有一种全方位的认识。
- Subjects:
- Chinese Studies
- Keywords:
- Philosophy Chinese Philosophical literature
- Resource Type:
- MOOC
-
MOOC
For three decades and longer we have heard educators and technologists making a case for the transformative power of technology in learning. However, despite the rhetoric, in many ways and at most institutional sites, education is still relatively untouched by technology. Even when technologies are introduced, the changes sometimes seem insignificant and the results seem disappointing. If the print textbook is replaced by an e-book, do the social relations of knowledge and learning necessarily change at all or for the better? If the pen-and-paper test is mechanized, does this change the nature of our assessment systems? Technology, in other words, need not necessarily bring significant change. Technology might not even represent a step forward in education. But what might be new? How can we use technologies to innovate in education? This course explores seven affordances of e-learning ecologies, which open up genuine possibilities for what we call New Learning – transformative, 21st century learning: 1. Ubiquitous Learning 2. Active Knowledge Making 3. Multimodal Meaning 4. Recursive Feedback 5. Collaborative Intelligence 6. Metacognition 7. Differentiated Learning These affordances, if recognized and harnessed, will prepare learners for success in a world that is increasingly dominated by digital information flows and tools for communication in the workplace, public spaces, and personal life. This course offers a wide variety of examples of learning technologies and technology implementations that, to varying degrees, demonstrate these affordances in action.
-
MOOC
Learn about the principles and practices of how grapes are grown and wine is made.
- Subjects:
- Food and Beverage
- Keywords:
- Vineyards Wine wine making
- Resource Type:
- MOOC
-
MOOC
Discuss the often perplexing question of how to pair wine with food, and the physical, structural, textural, and aromatic aspects of both the "wine side" and the "food side" of the equation
- Keywords:
- Wine wine making Wine tasting
- Resource Type:
- MOOC
-
MOOC
This course looks at how increasing greenhouse gases are warming the climate and what it means to decarbonise - reduce the greenhouse gas intensity of - the power sector. It will also provide a range of arguments in favour of decarbonisation, including consideration of ease of access to a secure and affordable energy supply and improvements to health and the environment. This course gathers together information about these different motivating factors for building a lower carbon power sector in one place, and includes a careful consideration of the importance of the political context. This course will challenge you to critically analyse your own political context. We would welcome advisors to senior decision makers in government, civil society activists and others interested in understanding and promoting renewable electricity to take this course. This course will help you develop a better understanding of the different dimensions of a move towards a cleaner power sector and develop more nuanced and detailed arguments.
- Subjects:
- Environmental Engineering and Environmental Policy and Planning
- Keywords:
- Renewable energy sources Energy policy Greenhouse gases -- Prevention Climatic changes
- Resource Type:
- MOOC
-
MOOC
Game designers work with a wide range of asset creators, programmers, producers, and others to bring a video game from concept to product. In this course, you will learn about the different types of teams a game designer is a member of, both large and small.
- Subjects:
- Interactive and Digital Media and Computing
- Keywords:
- Video games -- Design
- Resource Type:
- MOOC
-
MOOC
Video games as a medium go back more than 50 years to mainframe computers. Even the central design of video games can be traced back to the first games themselves. To be a good game designer, it's essential to have an understanding of the video game design industry's fascinating history. We've partnered with The Strong National Museum of Play to give you a unique look into the history of all things video game. The International Center for the History of Electronic Games at The Strong is the largest and most comprehensive public assemblage of video games and related materials in the world. The staff are celebrated experts in the field and the ICHEG is visited by scholars of video games from around the world. You'll gain amazing insight into the history of video games with a guided exploration of key artifacts from the collection of more than 100,000 electronic games and materials.
- Subjects:
- Interactive and Digital Media and Computing
- Keywords:
- Video games -- Design History
- Resource Type:
- MOOC
-
MOOC
Modern video games are incredibly complex multimedia productions involving still and motion graphics, code, audio, interface elements, narrative elements and much more. In this course, you will learn how and where all these pieces come from, who's in charge of each piece and the different stages of the game design process. We will also show you how everything is brought together to create a final product.
- Subjects:
- Interactive and Digital Media and Computing
- Keywords:
- Video games
- Resource Type:
- MOOC
-
MOOC
Transmedia storytelling is the practice of designing, sharing, and participating in a cohesive story experience across multiple traditional and digital delivery platforms - for entertainment, advertising and marketing, or social change. Have you ever read a book, seen a movie, watched a television show, or played a game that centred around different aspects of a larger story or universe? You may be familiar with popular examples of such universes like Star Wars, Marvel, and The Walking Dead (to name a few). How do the professionals develop such expansive narratives? How do they ensure that each element stays true to the original story? How do they innovatively use different technologies to share the stories, grow audiences and create an active and involved community of fans?
- Subjects:
- Interactive and Digital Media and Storytelling
- Keywords:
- Digital storytelling Narration (Rhetoric) Interactive multimedia
- Resource Type:
- MOOC
-
MOOC
In today’s hotel sector an increasingly complex network of traditional and web based channels have to be managed to insure hotel success. Key questions include: how should you distribute over the web? What should you include on your brand.com website so people book through it? How can you maximise the potential of online travel agents (OTAs)? With the distribution environment both highly complex and constantly evolving, this course will give you comprehensive foundation of current industry practices to help jump start your career in this fascinating domain.
- Subjects:
- Hotel, Travel and Tourism
- Keywords:
- Hotel management Revenue management Hospitality industry -- Management Hospitality Industry -- Marketing
- Resource Type:
- MOOC
-
MOOC
explore key themes in wine history and learn about the methods and resources that historians use to understand the past.
- Subjects:
- Food and Beverage
- Keywords:
- Wine wine making Wine industry
- Resource Type:
- MOOC
-
MOOC
introduces a number of basic scientific principles underpinning the methodology of cooking, food preparation and the enjoyment of food.
- Subjects:
- Food and Beverage and Food Science
- Keywords:
- Cooking
- Resource Type:
- MOOC
-
MOOC
This course will focus on the historical and cultural background, literary aesthetics, music, and performance of Kunqu, China’s classical opera. After viewing the lecture videos presented by scholars and renowned maestros in the field of Kunqu, students’ understanding and appreciation of Chinese performing arts, classical literature and traditional culture will be enhanced.
- Subjects:
- Chinese Studies and Performing Arts
- Resource Type:
- MOOC
-
MOOC
In this engineering course you will learn how to analyze vaults (long-span roofs) from three perspectives: 1. Efficiency = calculations of forces/stresses 2. Economy = evaluation of societal context and cost 3. Elegance = form/appearance based on engineering principles, not decoration We explore iconic vaults like the Pantheon, but our main focus is on contemporary vaults built after the industrial revolution. The vaults we examine are made of different materials, such as tile, reinforced concrete, steel and glass, and were created by masterful engineers/builders like Rafael Guastavino, Anton Tedesko, Pier Luigi Nervi, Eduardo Torroja, Félix Candela, and Heinz Isler. This course illustrates: - how engineering is a creative discipline and can become art - the influence of the economic and social context in vault design - the interplay between forces and form The course has been created for a general audience—no advanced math or engineering prerequisites are needed. This is the second of three courses on the Art of Structural Engineering, each of which are independent of each other. The course on bridges was launched in 2016, and another course will be developed on buildings/towers.
- Subjects:
- Structural Engineering
- Keywords:
- Roofs Suspension -- Design construction Structural analysis (Engineering)
- Resource Type:
- MOOC
-
MOOC
In this engineering course you will learn how to analyze bridges from three perspectives: Efficiency = calculations of forces/stresses Economy = evaluation of societal context and cost Elegance = form/appearance based on engineering principles, not decoration With a focus on some significant bridges built since the industrial revolution, the course illustrates how engineering is a creative discipline and can become art. We also show the influence of the economic and social context in bridge design and the interplay between forces and form.
- Subjects:
- Structural Engineering
- Keywords:
- Structural analysis (Engineering) Bridges -- Design construction
- Resource Type:
- MOOC
-
MOOC
Learn fundamental principles of architecture — as an academic subject or a professional career — from a study of history’s important buildings.
- Keywords:
- Architectural design Architecture
- Resource Type:
- MOOC
-
MOOC
How can we strengthen sustainability? By empowering individuals and communities to transform and balance dynamic natural resources, economic prosperity, and healthy populations. In this course, you’ll explore productive and disruptive social, ecological, and economic intersections – the “triple bottom line.” You’ll investigate a spectrum of global, national, regional, municipal and personal relationships that are increasing resiliency. Most importantly, you’ll learn how to effectively locate your interests, and to leverage optimistic change within emerging 21st century urban environments. This course will describe fundamental paradigm shifts that are shaping sustainability. These include connectivity, diversity, citizen engagement, collaboration source tracing, mapping, transportation, and integrative, regenerative design. We will take examples from cities around the globe; making particular use of the complex evolution of site-specific conditions within the Connecticut River watershed. In addition we will present tools and strategies that can be utilized by individuals, communities, and corporations to orchestrate effective and collective change. Each week, lessons will highlight the significance of clean water as a key indication of ecosystem, community and human health. Learners will be asked to investigate and share information about their local environment. Finally, we will note the impact of such disruptive forces as industrial pollution, changing governance, privatization of public services, mining of natural resources, public awareness, and climate change. A fundamental course goal will be to characterize indicators of economic prosperity and happiness that relate to environmental sustainability – and the capacity of individuals to create change.
- Subjects:
- Environmental Engineering, Building Services Engineering, and Building and Real Estate
- Keywords:
- Urban ecology (Sociology) Sustainable development
- Resource Type:
- MOOC
-
MOOC
Gain the skills and knowledge to rethink current tourism developments and reimagine practices to build alternatives futures.
- Subjects:
- Hotel, Travel and Tourism
- Keywords:
- Sustainable tourism
- Resource Type:
- MOOC
-
MOOC
The MOOC introduces learners to key environmental health and natural resources management challenges associated with the rapid growth in international tourist arrivals into low-income countries.
- Subjects:
- Hotel, Travel and Tourism
- Keywords:
- Sustainable tourism
- Resource Type:
- MOOC
-
MOOC
It has become almost impossible to imagine what our lives would be like without the many benefits of packaging - just think about the different packaging and single-use items you use on a daily basis. Yet as our global population grows in size and affluence, both our collective demand for packaging materials and the waste we generate as a result will increase dramatically. Currently, large amounts of packaging waste escape formal collection and recycling systems and eventually end up polluting the environment. Moreover, their material value is forever lost to the economy. The Ellen MacArthur Foundation estimates that uncollected plastic packaging waste alone is worth somewhere between 80 to 120 billion dollars a year. So how can we improve packaging systems in order to capture this wasted potential? Clearly, the way we currently design, recover, and reuse packaging urgently needs a rethink! In this course, you will learn about the design of sustainable packaging systems. To do so we will explore the design and business strategies of the circular economy. Contrary to our current industrial model, which extracts, uses and ultimately disposes of resources, a circular economy is regenerative by design. This means that products and services are reimagined from a systems perspective in order to minimize waste, maximize positive economic, environmental and social impacts, and keep resources locked in a cycle of restoration. This course is for you if you are interested in learning about sustainable packaging design. You'll also benefit if you are a professional in the packaging industry and want to learn how to find circular opportunities in your work. Students - particularly in design - will be able to broaden their knowledge of circular design and business strategies.
- Subjects:
- Product Design
- Keywords:
- Packaging -- Environmental aspects Packaging -- Design Sustainable design
- Resource Type:
- MOOC
-
MOOC
Meeting growing global energy demand, while mitigating climate change and environmental impacts, requires a large-scale transition to clean, sustainable energy systems. Students and professionals around the world must prepare for careers in this future energy landscape, gaining relevant skills and knowledge to expedite the transformation in industry, government and nongovernmental organizations, academia, and nonprofits. The building sector represents a large percentage of overall energy consumption, and contributes 40% of the carbon emissions driving climate change. Yet buildings also offer opportunities for substantial, economical energy efficiency gains. From retrofit projects to new construction, buildings require a context-specific design process that integrates efficiency strategies and technologies. In this course, you'll be introduced to a range of technologies and analysis techniques for designing comfortable, resource-efficient buildings. The primary focus of this course is the study of the thermal and luminous behavior of buildings. You'll examine the basic scientific principles underlying these phenomena, and use computer-aided design software and climate data to explore the role light and energy can play in shaping architecture. These efficiency design elements are critical to the larger challenge of producing energy for a growing population while reducing carbon emissions.
- Subjects:
- Environmental Engineering, Building Services Engineering, and Building and Real Estate
- Keywords:
- Buildings -- Energy conservation Sustainable architecture Sustainable buildings -- Design construction
- Resource Type:
- MOOC
-
MOOC
basics of questionnaire design, data collection methods, sampling design, dealing with missing values, making estimates, combining data from different sources, and the analysis of survey data.
- Subjects:
- Statistics and Research Methods
- Keywords:
- Social surveys -- Methodology Social sciences -- Research -- Methodology
- Resource Type:
- MOOC
-
MOOC
This course teaches the R programming language in the context of statistical data and statistical analysis in the life sciences. We will learn the basics of statistical inference in order to understand and compute p-values and confidence intervals, all while analyzing data with R code. We provide R programming examples in a way that will help make the connection between concepts and implementation. Problem sets requiring R programming will be used to test understanding and ability to implement basic data analyses. We will use visualization techniques to explore new data sets and determine the most appropriate approach. We will describe robust statistical techniques as alternatives when data do not fit assumptions required by the standard approaches. By using R scripts to analyze data, you will learn the basics of conducting reproducible research. Given the diversity in educational background of our students we have divided the course materials into seven parts. You can take the entire series or individual courses that interest you. If you are a statistician you should consider skipping the first two or three courses, similarly, if you are biologists you should consider skipping some of the introductory biology lectures. Note that the statistics and programming aspects of the class ramp up in difficulty relatively quickly across the first three courses. We start with simple calculations and descriptive statistics. By the third course will be teaching advanced statistical concepts such as hierarchical models and by the fourth advanced software engineering skills, such as parallel computing and reproducible research concepts.
- Subjects:
- Statistics and Research Methods and Mathematics and Statistics
- Keywords:
- Life sciences -- Statistical methods Mathematical statistics -- Data processing R (Computer program language)
- Resource Type:
- MOOC
-
MOOC
Cities are first and foremost built for people, and in today’s world, people produce large amounts of valuable data, thus contributing to what we call “smart cities." As almost every building and every city is a prototype, these communities are in the early stage of development and require specific attention and expertise as we advance. Smart cities, such as Zurich and Boston, consist of human-made structures or environments that are, in some capacity, monitored, metered, networked and controlled. With this functionality, combined with stationary sensors and mobile devices, data and information have become the new building materials of future cities. Using this data, citizens are now beginning to influence the design of future cities and the re-design of existing ones. In this architecture course, you will learn the basics of information cities and urban science research, as well as how dynamic behavior and citizen-driven learning differentiate the responsive city from the smart city. The cities we present and develop in this course use the stocks and flows of information as the main drivers of change. To deepen your knowledge of smart cities and give a perspective on the future of these cities, we also introduce the concept of citizen design science, a combination of citizen science, urban design, and cognitive design computing. Participants will furthermore have unique access to a design research platform for citizen design science. The intelligent use of data and information is at the core of this course, and these concepts will be the next generation of participatory design and design computing environments.
- Subjects:
- Building Services Engineering and Building and Real Estate
- Keywords:
- Smart cities Cities towns -- Effect of technological innovations on City planning
- Resource Type:
- MOOC
-
MOOC
An introduction to the Six Sigma methodology and DMAIC cycle for process improvement with a focus on the Define and Measure phases.
- Subjects:
- Management
- Keywords:
- Six sigma (Quality control stard)
- Resource Type:
- MOOC
-
-
MOOC
Cities are built site by site. Site planning has been taught in urban planning, landscape architecture and architecture programs for over a century and continues to be a foundation course for those who aspire to plan the built environment. It is a required subject on licensing and certification programs for each of these disciplines. Mastering the art of site planning requires substantive knowledge, well-honed design skills, and familiarity with examples and prototypes of site organization. This course provides the perspectives of leading academics and practitioners on the important issues in preparing site plans. It offers a foundation of knowledge, and the opportunity to apply what is learned in preparing a site plan.
- Subjects:
- Environmental Engineering, Building Services Engineering, and Building and Real Estate
- Keywords:
- Building sites -- Planning
- Resource Type:
- MOOC
-
MOOC
In this course, we will introduce you to the fundamentals of sensor fusion for automotive systems. Key concepts involve Bayesian statistics and how to recursively estimate parameters of interest using a range of different sensors. The course is designed for students who seek to gain a solid understanding of Bayesian statistics and how to use it to fuse information from different sensors. We emphasize object positioning problems, but the studied techniques are applicable much more generally. The course contains a series of videos, quizzes and hand-on assignments where you get to implement many of the key techniques and build your own sensor fusion toolbox. The course is self-contained, but we highly recommend that you also take the course ChM015x: Multi-target Tracking for Automotive Systems. Together, these courses give you an excellent foundation to tackle advanced problems related to perceiving the traffic situation around an autonomous vehicle using observations from a variety of different sensors, such as, radar, lidar and camera.
- Subjects:
- Electrical Engineering, Mechanical Engineering, and Transportation
- Keywords:
- Automobiles -- Electronic equipment Automotive sensors
- Resource Type:
- MOOC
-
MOOC
Although taking, sharing, and viewing photographs has become second nature for many of us, our regular engagement with images does not necessarily make us visually literate. This course aims to address the gap between seeing and truly understanding photographs by introducing a diversity of ideas, approaches, and technologies that inform their making. In this course you will look closely at photographs from the collection of The Museum of Modern Art and hear a variety of perspectives on what a photograph is and the ways that photography has been used throughout its nearly 180 year history: as a means of artistic expression, as a tool for science and exploration; as an instrument of documentation; to tell stories and record histories; and as a mode of communication and critique in our ever increasingly visual culture.
- Subjects:
- Photography
- Keywords:
- Photography Photographs Art photography
- Resource Type:
- MOOC
-
MOOC
Engineers in the automotive industry are required to understand basic safety concepts. With increasing worldwide efforts to develop connected and self-driving vehicles, traffic safety is facing huge new challenges. This course is for students or professionals who have a bachelor's degree in mechanical engineering or similar and who are interested in a future in the vehicle industry or in road design and traffic engineering. It's also of value for people already working in these areas who wantbetter insight into safety issues. This course teaches the fundamentals of active safety (systems for avoiding crashes or reducing crash consequences) as well as passive safety (systems for avoiding or reducing injuries). Key concepts include in-crash protective systems, collision avoidance, and safe automated driving. The course will introduce scientific and engineering methodologies that are used in the development and assessment of traffic safety and vehicle safety. This includes methods to study the different components of real-world traffic systems with the goal to identify and understand safety problems and hazards. It includes methods to investigate the attitudes and behavior of drivers and other road users as well as recent solutions to improve active safety. Italso includes methods to study human body tolerance to impact and solutions to minimize the injury risk in crashes. Study topics include crash data analysis and in-situ observational studies of drivers and other road users by the use of instrumented vehicles and roadside camera systems. Solutions in active safety, such as driver alertness monitoring, driver information as well as collision avoidance and collision mitigation systems, will be described. Examples of in-crash protective systems are combinations of traditional restraints such as seat belts and airbags but with advanced functions such as automatic adaption to the individual occupant as well as pre-collision activation based on advanced integrated sensor systems and communication systems. The course will be based on recorded lectures that use videos and animations to enhance the experience. Online tutorials that access simulation models will give the participants an experience of influencing parameters in active safety and passive safety systems. As a result of support from MathWorks, students will be granted access to MATLAB/Simulink for the duration of the course.
- Subjects:
- Transportation
- Keywords:
- Traffic safety Roads -- Design construction Motor vehicles -- Safety measures Automobile industry trade
- Resource Type:
- MOOC
-
MOOC
Responsive cities define the future of urbanization. They evolve from smart cities, with a fundamental difference: The citizens move from the center of attention to the center of action. Responsive citizens use smart technology to contribute to planning, design and management of their cities. Responsive cities are about bringing cities back to their citizens. Responsive cities change the way the technology of a smart city is used. The first Smart Cities were technology driven and they produced large amounts of data from fixed or centrally controlled sensors. But by now, the citizens and their mobile phones have taken the leading role in direct data generation. Rather than using data that are centrally collected and stored, you will see platforms on which the citizens place the data and the information they decide to share. With this, your own responsibility becomes a foundation of a Responsive City. Cities evolve from being smart to being responsive. To demonstrate the potential of Responsive Cities, this course will define the concept of Citizen Design Science, a combination of Citizen Design, Citizen Science and Design Science. Experts, citizens and scientists participate in Citizen Design Science. This approach is still in an early stage of development, but with the Responsive Cities Massive Open Online Course, you will be ahead in exploring and defining its possibilities. ‘Responsive cities’ is the fourth edition of the ‘Future Cities’ series on urban MOOCs. The ‘Future Cities’ series is the first and complete series of urban courses dealing with the design, management and transformation of cities for their sustainable and resilient future. With every edition, the series becomes more interactive. It increasingly empowers citizens around the world to become part of the development of their own cities, especially in those places where this knowledge is needed most. Therefore, the course is inclusive for every individual interested in the planning, construction, redevelopment and management of future cities. The course is open to anyone regardless of background, skills, knowledge, or age.
- Subjects:
- Building Services Engineering and Building and Real Estate
- Keywords:
- Smart cities Sustainable development Cities towns -- Effect of technological innovations on City planning
- Resource Type:
- MOOC
-
MOOC
over the basic elements of designing and evaluating questionnaires.
- Subjects:
- Statistics and Research Methods
- Keywords:
- Social surveys Social sciences -- Research Questionnaires -- Methodology
- Resource Type:
- MOOC
-
MOOC
In this course, you will obtain some insights about marketing to help determine whether there is an opportunity that actually exists in the marketplace and whether it is valuable and actionable for your organization or client. Week 1: Assess methods available for creating quantitative surveys, along with their advantages and disadvantages. Identify the type of questions that should be asked and avoid unambiguous survey questions. Week 2: Design, test, and implement a survey by identifying the target audience and maximizing response rates. You will have an opportunity to use Qualtrics, a survey software tool, to launch your own survey. Week 3: Analyze statistical models that can be applied to your marketing data, so that you can make data-driven decisions about your marketing mix. Week 4: Predict most likely outcomes from the marketing decisions and match the type of analysis needed for your business problem. Take Quantitative Research as a standalone course or as part of the Market Research Specialization. You should have equivalent experience to completing the second course in this specialization, Qualitative Research, before taking this course. By completing the third class in the Specialization, you will gain the skills needed to succeed in the full program.
- Subjects:
- Marketing and Statistics and Research Methods
- Keywords:
- Quantitative research Marketing research
- Resource Type:
- MOOC
-
MOOC
Cities are becoming the predominant living and working environment of humanity, and for this reason, livability or quality of life in the city has become crucial. This urban planning course will focus on four areas that directly affect livability in a city: Urban energy, urban climate, urban ecology and urban mobility. The course begins by presenting measurable criteria for the assessment of livability, and how to positively influence the design of cities towards greater livability. We will focus on this basic topic of the human habitat in a holistic way, and introduce possibilities of participatory urban design by citizens, leading towards the development of a citizen design science. You will be able to share your experiences with the other participants in the course and also with the experts from the teaching team. In completing this course, you will better understand how to make a city more livable by going beyond the physical appearance and by focusing on different properties and impact factors of the urban system. Livability in Future Cities is the second course in a series of MOOCs under the title “Future Cities.” This series aims to bring the latest research on planning, managing and transforming cities to places where this knowledge has the highest benefit for its citizens. “Future Cities” provided an overview, and this course will focus on livability in existing and new cities.
- Subjects:
- Building Services Engineering and Building and Real Estate
- Keywords:
- Smart cities Urban ecology (Sociology) Cities towns -- Effect of technological innovations on Quality of life City planning
- Resource Type:
- MOOC
-
MOOC
This short course is adapted from a semester length graduate level coursetaught at MIT covering Qualitative Research Methods. This online course will focus specifically on teaching how to prepare for and conduct a conversational interview for data gathering purposes. We will also discuss the nature of qualitative research as a methodology, how it compares and differs from other forms of research, and how qualitative and quantitative research complement each other in a research project. This isthe first in a multi-part series which will be released over the coming year, which will focus on Conversational Interviewing, Data Analysis, and Constructing Theory. You might have encountered other forms of interview techniques in your studies and training. The form that we are teaching is the preferred method of Professor Silbey's, one that she has used extensively throughout her career. The goal is to construct an interview protocol such that you will be able to guide your interviewee through topics of interest to your study without bringing them up explicitly, in order to explore experiences and accounts without pointing respondents in particular directions. Not sure what an interview protocol is? No problem! You will by the end of the course.
- Subjects:
- Statistics and Research Methods
- Keywords:
- Conversation analysis Qualitative research -- Methodology Social sciences -- Research -- Methodology Interviewing
- Resource Type:
- MOOC
-
MOOC
In this course you will be introduced to the basic ideas behind the qualitative research in social science. You will learn about data collection, description, analysis and interpretation in qualitative research. Qualitative research often involves an iterative process. We will focus on the ingredients required for this process: data collection and analysis. You won't learn how to use qualitative methods by just watching video's, so we put much stress on collecting data through observation and interviewing and on analysing and interpreting the collected data in other assignments. Obviously, the most important concepts in qualitative research will be discussed, just as we will discuss quality criteria, good practices, ethics, writing some methods of analysis, and mixing methods. We hope to take away some prejudice, and enthuse many students for qualitative research.
- Subjects:
- Statistics and Research Methods
- Keywords:
- Qualitative research -- Methodology Social sciences -- Research -- Methodology
- Resource Type:
- MOOC
-
MOOC
go in-depth with qualitative market research methods, from design to implementation to analysis.
- Subjects:
- Marketing and Statistics and Research Methods
- Keywords:
- Qualitative research Marketing research
- Resource Type:
- MOOC
-
MOOC
This course is an introduction to the Delft Design Approach offering a model and a set of signature methods from Delft to teach you how to get from understanding the user in context to defining a meaningful design challenge and – in the end – deliver a great design! The course challenges you to experience the design process yourself and reflect on your work with the help of students and excellent teaching staff from Delft, and industrial experts. What you'll learn: - How to study users in their own environment; - How to translate user insights into a design challenge that will spark creativity; - How to create a meaningful design to meet your challenge; - How to design and to structure your projects with the support of design thinking, a model and several methods; - How to evaluate and present your design.
- Subjects:
- Product Design
- Keywords:
- Commercial products Industrial design Product design New products
- Resource Type:
- MOOC
-
MOOC
In this course you will learn about a wide variety of Web 2.0 tools to use in your teaching and learning. Web 2.0 tools provide innovative ways to communicate, present content, and collaborate with others in creative ways. Web 2.0 tools are easy to learn, use, and implement, and many are free. This course will not only introduce you to popular Web 2.0 tools like Edmodo, Twitter, Voicethread, and Skype in K-16 instruction, but you will also learn how to effectively integrate these technologies into your classroom practices and create engaging student activities.
- Keywords:
- Internet in education Computer-assisted instruction Educational technology Educational innovations
- Resource Type:
- MOOC
-
MOOC
In this course, participants will explore research-informed, effective practices for online teaching and learning. By enrolling, you will learn practical ways to quickly move into teaching online, guided by top scholars and practitioners in the field. Each module, you will watch videos and read articles by online learning experts and participate in activities and discussions covering critical topics that will make the online environment a rich learning experience for your students. The instructors will synthesize relevant resources to help those who are new to online learning and those who have experience, but want to expand their skills and provide support for others. You will have the opportunity to ask questions, share practices that have worked well in online learning environments, and receive feedback on your teaching and learning plans. Given recent global developments related to COVID-19, many have rapidly shifted to move teaching online. For those who have not taught online before, this can be a challenging experience. Fortunately, there is a rich research base, dating back over sixty years, that provides insight and guidance on the key factors that enable successful learning online. This course will support the pivot to online learning by exploring the scientific literature as well as practical actions that enable online success and equitable outcomes for all learners. While the target audience of the course is postsecondary institutions, this course will be of use to anyone moving into online teaching and learning.
-
MOOC
This course provides a basic and general knowledge of Nursing Management and Leadership and describes the basic features of leadership and practical applications in terms of leadership, personal development and work experience. By following this course, you will make significant progress in Leadership and in your business life. This course, where leadership courses are taught through Nursing Management and Leadership, will open new doors for you in your business life.
The information presented in this course is constantly updated. We know that the Udemy certificate you will receive will offer you many opportunities in your life and career, as well as improving yourself. Increasing the lessons by continuously adding the information in this course by your teachers, academics and expert technical team requires you to check your course at frequent intervals. This course, which is your lifelong access, will continue to provide you with more up-to-date and different approach.
What is Nursing Management?
- Subjects:
- Nursing
- Keywords:
- Nursing services -- Administration Leadership
- Resource Type:
- MOOC
-
MOOC
Education is in a state of flux – transitioning from traditional architectures and practices to new ecologies of teaching and learning influenced by the tremendous social and technological changes of our times. What changes are afoot today in workplaces, civic life and everyday community life? What are their implications for education? What are the possible impacts of contemporary social transformations on teaching and learning - including in the areas of technology, media, globalization, diversity, changing forms of work in the “knowledge society”, and, in these contexts, changing learner needs and sensibilities? This course explores three pedagogical paradigms: “didactic”, “authentic” and “transformative” learning. It takes an historical perspective in order to define the contemporary dimensions of what we term “new learning”. It prepares participants to make purposeful choices and link particular theories/instructional approaches to individual and group learning goals.
- Keywords:
- Education -- Study teaching Educational change Learning
- Resource Type:
- MOOC
-
MOOC
Autonomous vehicles, such as self-driving cars, rely critically on an accurate perception of their environment. In this course, we will teach you the fundamentals of multi-object tracking for automotive systems. Key components include the description and understanding of common sensors and motion models, principles underlying filters that can handle varying number of objects, and a selection of the main multi-object tracking (MOT) filters. The course builds and expands on concepts and ideas introduced in CHM013x: ""Sensor fusion and nonlinear filtering for automotive systems"". In particular, we study how to localize an unknown number of objects, which implies various interesting challenges. We focus on cameras, laser scanners and radar sensors, which are all commonly used in vehicles, and emphasize on situations where we seek to track nearby pedestrians and vehicles. Still, most of the involved methods are more general and can be used for surveillance or to track, e.g., biological cells, sports athletes or space debris. The course contains a series of videos, quizzes and hands-on assignments where you get to implement several of the most important algorithms. Learn from award-winning and passionate teachers to enhanceyour knowledge at the forefront of research on self-driving vehicles. Chalmers is among the top engineering schools that distinguish itself through its close collaboration with industry.
- Subjects:
- Electrical Engineering, Mechanical Engineering, and Transportation
- Keywords:
- Automobiles -- Design construction Computer vision Automated vehicles
- Resource Type:
- MOOC
-
MOOC
Modeling, control design, and simulation are important tools supporting engineers in the development of automotive systems, from the early study of system concepts (when the system possibly does not exist yet) to optimization of system performance. This course provides a theoretical basis to model-based control design with the focus on systematically develop mathematical models from basic physical laws and to use them in control design process with specific focus on automotive applications. You will learn the basics of mathematical modeling applied to automotive systems, and based on the modeling framework different type of controller and state estimation methods will be introduced and applied. Starting from a pure state-feedback concept down to optimal control methods, with special attention on different automotive applications. Different methods for state reconstruction is also introduced and discussed in the course. Exercises play an important rolethroughout the course. This course is aimed at learners with a bachelor's degree or engineers in the automotive industry who need to learn more about mathematical modelling of automotive systems.
- Subjects:
- Electrical Engineering, Mechanical Engineering, and Transportation
- Keywords:
- Automobiles -- Design construction -- Mathematical models Motor vehicles -- Dynamics
- Resource Type:
- MOOC
-
MOOC
Many natural and man-made structures can be modeled as assemblages of interconnected structural elements loaded along their axis (bars), in torsion (shafts) and in bending (beams). In this course you will learn to use equations for static equilibrium, geometric compatibility and constitutive material response to analyze structural assemblages. This course provides an introduction to behavior in which the shape of the structure is permanently changed by loading the material beyond its elastic limit (plasticity), and behavior in which the structural response changes over time (viscoelasticity). This is the second course in a 3-part series. In this series you will learn how mechanical engineers can use analytical methods and “back of the envelope” calculations to predict structural behavior. The three courses in the series are: Part 1 – 2.01x: Elements of Structures. (Elastic response of Structural Elements: Bars, Shafts, Beams). Fall Term Part 2 – 2.02.1x Mechanics of Deformable Structures: Part 1. (Assemblages of Elastic, Elastic-Plastic, and Viscoelastic Bars in axial loading). Spring Term Part 3 – 2.02.2x Mechanics of Deformable Structures: Part 2. (Assemblages of bars, shafts, and beams. Multi-axial Loading and Deformation. Energy Methods). Summer Term
- Subjects:
- Mechanical Engineering
- Keywords:
- Strength of materials Deformations (Mechanics)
- Resource Type:
- MOOC
-
MOOC
Gone are the days when Problem Solving and Decision Making often happened within the four walls of a top boss’s cabin. In the beginning of this century - As we blinked our eyes, the world changed, cabins broke down to give way to open offices, traditional management hierarchy collapsed and saw a horizontal spread. With delegation and authority batons being passed to the executive and trainee levels, Problem Solving and Decision Making skills became a must have quality at all levels in an organization. In simple words it is – have it or leave it.
That’s less said - Just learning the skill of solving problems and taking good decisions isn’t enough. Today, the modern workplace demands the new age executives and managers to expand their potential of creative thinking and bring it to the table while solving problems and making decisions. There is one more news for you, Creativity, Problem Solving and Decision Making skills are no more confined to the management and leadership levels, students who aspire for their dream jobs to be a reality, also will have to bring these skills along with their candidature.
That is why, we decided to offer this practical and highly researched course with all these 3 skills clubbed into 1 course so that you may not have to search anywhere - anymore.
If at any point of your life, you ever felt the need to work upon your creative thinking ability or your problem solving skills or even your decision making capability, look no further, this course is just the right one for you.
- Course related:
- SD5131 Interdisciplinary Project
- Keywords:
- Problem solving Creative thinking Critical thinking
- Resource Type:
- MOOC
-
MOOC
The Machine Learning Specialization is a foundational online program created in collaboration between DeepLearning.AI and Stanford Online. This beginner-friendly program will teach you the fundamentals of machine learning and how to use these techniques to build real-world AI applications.
This Specialization is taught by Andrew Ng, an AI visionary who has led critical research at Stanford University and groundbreaking work at Google Brain, Baidu, and Landing.AI to advance the AI field.
This 3-course Specialization is an updated version of Andrew’s pioneering Machine Learning course, rated 4.9 out of 5 and taken by over 4.8 million learners since it launched in 2012.
It provides a broad introduction to modern machine learning, including supervised learning (multiple linear regression, logistic regression, neural networks, and decision trees), unsupervised learning (clustering, dimensionality reduction, recommender systems), and some of the best practices used in Silicon Valley for artificial intelligence and machine learning innovation (evaluating and tuning models, taking a data-centric approach to improving performance, and more.) By the end of this Specialization, you will have mastered key concepts and gained the practical know-how to quickly and powerfully apply machine learning to challenging real-world problems. If you’re looking to break into AI or build a career in machine learning, the new Machine Learning Specialization is the best place to start.
- Course related:
- AAE5103 Artificial Intelligence in Aviation Industry
- Subjects:
- Computing
- Keywords:
- Machine learning Artificial intelligence
- Resource Type:
- MOOC
-
MOOC
Does your business need a make-over? Are you unsure how to start? Having an innovative business model is key for a profitable business and growth. In this business and management course, you will learn how to design, test and implement new business models for sustainable success. This course introduces you to the main topics of business model innovation. You will learn what drives business model innovation and why it is valuable to you and your business. You will apply practical tools to (re)design and test a business model. Be inspired by real-life business model examples from fellow entrepreneurs and learn from leading experts who design business model innovations. By the end of this course, you will be able to structure your thinking and communicate your business model ideas and learn how to improve your own business. Start the course anytime, and complete it at your own pace! What you'll learn: What a business model is. Why business models matter to your firm and the value they bring. How business model innovation improves business performance. How tooling can help you to innovate your business model.in
- Subjects:
- Management
- Keywords:
- Business planning Strategic planningIndustrial management
- Resource Type:
- MOOC
-
-
MOOC
You will also learn about the practical factors that need to be taken into consideration during the transition process, i.e. the competency of your people and your IT, in order to successfully implement a new business model. What you'll learn: How to create a business model roadmap. How to plan concrete actions to realize a new business model. How to find partners to realize a new business model. In this business and management course, you will learn how to make a practical action plan to implement your new business model. Designing a new business model is one thing, but how do you actually put it into practice? How do you move from your current model to a new business model? You will create a business model roadmap that will include practical activities that take into consideration the possible risks associated with moving to a new business model.
- Subjects:
- Management
- Keywords:
- Business planning Strategic planning Industrial management
- Resource Type:
- MOOC
-
-
MOOC
Are you an educator? Have you ever wanted to understand more about how to design your class to make better use of educational technology – whether fully online or in blended contexts? Would you like to learn from those who have extensive practical experience with online technologies? The Learning to Teach Online (LTTO) MOOC will help you develop a working understanding of successful online teaching strategies that you can apply in your own practice. The course is based upon the multi award winning open educational resource developed by Dr Simon McIntyre and Karin Watson. Integrating online technologies into your teaching can be a challenging prospect, and it can be difficult to know how to approach it effectively for the benefit of both students and yourself. No one knows your own content and teaching strengths better than you, and the “one size fits all” formula doesn’t always suit everyone. No matter what type of technology you are interested in exploring or your level of experience, this course will help you draw on your teaching strengths and find the approach that is right for you, your students and your educational context. This course will guide you through your journey of understanding how online technologies can enhance your course design. You will have the opportunity to develop your understanding of effective online teaching practices and their relationship to the use of different technologies. You will also be encouraged to progressively design and reflect upon your own online learning activity, assessment or resource for use in your own class if you choose to undertake the course assignments.
- Keywords:
- Web-based instruction Distance education Computer-assisted instruction
- Resource Type:
- MOOC