Search Constraints
Number of results to display per page
Results for:
Search Results
-
Video
The lecture commenced with a welcome speech and speaker introduction by Prof. CHEN Qingyan, Director of PAIR, followed by a presentation by Prof. Cui. He first shared his scientific journey by reminiscing about the old days when he moved abroad to develop an academic career after graduating in China and gradually became a highly successful scientist. Next, he explained the importance of interdisciplinary research and shared how the combination of medical science and engineering enables the development of health technologies such as imaging, keyhole surgery, in vitro diagnostics, in vitro fertilisation, etc. Prof. Cui emphasised that scientists are to “discover” and find out “how a thing happens” whereas engineers are to “create” and “make things happen”. He then gave some advice on how to do well in interdisciplinary research and shared some innovations in microbioreactor and point-of-care testing developed by him and his team which has achieved great success in research commercialisation and made significant contributions to drug discovery and public health. To conclude, Prof. Cui shared that scientific success is based on many factors, including team, facilities, timing, luck, etc., and encouraged the next generation of engineers and scientists to consider a career in biomedical engineering, an exciting and rewarding domain.
Following the lecture, a lively and insightful question-and-answer session was moderated by Ir Prof. ZHANG Ming, Director of the Research Institute for Sports Science and Technology (RISports), Head of the Department of Biomedical Engineering and Chair Professor of Biomechanics. The audience had fruitful discussions with Prof. Cui.
Event date: 23/04/2024
Speaker: Prof. Zhanfeng CUI (University of Oxford)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Interdisciplinary research Interdisciplinary approach in education
- Resource Type:
- Video
-
Video
The lecture commenced with a welcome speech and speaker introduction by Ir Prof. MAN Hau-chung, Dean of Faculty of Engineering and Director of the Research Institute for Advanced Manufacturing (RIAM). In Prof. Lin presentation, he primarily indicated the increasing global requirements for reducing energy use and carbon dioxide emission of transportation vehicles, lightweight passenger cars have become an inevitable trend. Ultra-high strength steel (UHSS) can save the production cost of vehicles, improve productivity and car performance. Next, he introduced the “HFQ®-Technology” developed by his team in recent years that has enabled high strength alloys to be stamped into complex-shaped automotive components. He outlined the use of thermomechanical experimental tests for generating high quality data for modelling, and the use of spatio-temporal method for determining necking and fracture strains of sheet metals. He also explained the computational steps for evaluating the formability of sheet metals under hot stamping. To conclude, Prof. Lin emphasised that improvements in experimental sciences, technologies and standardised testing are important for supporting the development of new materials processing technologies.
Event date: 09/04/2024
Speaker: Prof. LIN Jianguo (Imperial College London)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Automobiles -- Materials Steel High strength Automobile industry trade
- Resource Type:
- Video
-
Video
Smaller, faster-charging batteries are the answer for affordable and sustainable electric vehicles (EVs) for everyone, everywhere. The ability to quickly refill energy is profoundly important in order to reduce EV cost and demand for critical minerals. In this talk I will present asymmetric temperature modulation (ATM) approach to enabling 10-minute fast charging of energy-dense Li-ion batteries in any temperatures (even at -60°C) while still delivering remarkable cycle life. Recent disastrous events at EV charging stations caused by an arctic blast in Chicago will be given as an example of the dire need for quick energy refill in the extreme cold. Battery fast charging must also work in hot summers along with high-temperature stability of cycling and storage. We shall present novel thermal management concepts for extreme fast charging in both extreme cold and hot conditions. Overall, our development points to a new paradigm of battery design and thermal management without having to trade-off among fast charge, safety, lifetime, and cost.
Event date: 27/02/2024
Speaker: Prof. WANG Chao-Yang
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Electrical Engineering
- Keywords:
- Lithium ion batteries Electric vehicles -- Batteries
- Resource Type:
- Video
-
Video
The lecture commenced with a warm welcome address by Prof. CHEN Qingyan, Director of PAIR, followed by a brief speaker introduction by Prof. WANG Zuankai, Associate Vice President (Research and Innovation) of PolyU. In his presentation, Prof. Yang highlighted that urgent need for tissue/organ biomanufacturing owing to the shortage of donation for organ transplantation. He pointed out some challenges in the in vitro manufacturing of tissues/organs, particularly in relation to accurate design, precise fabrication, and functional induction, which underscore the imperative need for new methods for tissue/organ manufacturing. Next, Prof. Yang outlined the development roadmap of biomanufacturing and shared specific examples demonstrating the research progress in 3D bioprinting. In concluding his presentation, Prof. Yang shared his insights on the future direction for biomanufacturing, as well as some significant accomplishments by him and his team at Zhejiang University in the field.
A question-and-answer session moderated by Prof. Wang was followed. Both the online and on-site audience had a fruitful discussion with Prof. Yang.
Event date: 2/1/2024
Speaker: Prof. Huayong Yang (Zhejiang University)
Moderator: Prof. Zuankai Wang (Hong Kong Polytechnic University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Biomedical Engineering and Biology
- Keywords:
- Biomedical engineering Tissue engineering Regenerative medicine Three-dimensional printing
- Resource Type:
- Video
-
Video
Overcoming the COVID-19 pandemic, public interests for healthcare innovations significantly increase. In order to prepare the next pandemic, POSTECH is initiating a new engineering-based medical school. This new program aims to solve practical medical problems via innovative technology and put significant efforts for commercialisation. As a Program Chair for the new Medical Science and Engineering Program, I will share my experience and future plans. Further, we spin-off a start-up company, “Opticho”, from the research outcomes in my lab. I will share my experience how translate the lab toys to commercial products: not only excitement but also difficulty.
Event date: 27/10/2023
Speaker: Prof. KIM Chulhong
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Health Technology and Informatics, Biomedical Engineering, and Medicine
- Keywords:
- Biomedical engineering Medical education Medical technology
- Resource Type:
- Video
-
Video
Water shortage is one of the biggest challenges that humanity faces. Novel technologies to tackle the challenge of water scarcity are urgently needed. However, all the existing studies are based on bare fibers with diameter in the order of mm. This talk introduces a novel fog collection technology using microfibers fabricated by near-field electrospinning. The collection efficiency reaches a record high level. Systematic investigation reveals that the waterdrops are “visible” to fog droplets in the incoming air flow because of the relatively small size of the microfibers. Thus, the large waterdrops deflect the fog-carrying airflow to the satellite small waterdrops, which effectively intercept the fog droplets.
Event Date: 12/10/2023
Speaker: Prof. TAN Zhongchao (Founding Chair Professor, Vice Provost and Dean of Academic Affairs of the Eastern Institute of Technology in Ningbo, China)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Environmental Sciences and Mechanical Engineering
- Keywords:
- Fog Hydrology Water harvesting Water-supply
- Resource Type:
- Video
-
Video
In the presentation, Prof. Chan shared Singapore’s long-term energy plan and research focus, as well as a few major initiatives on hydrogen application. He then introduced turquoise hydrogen and the catalytic decomposition of methane for hydrogen production, followed by an overview of the research activities on hydrogen and fuel cells at NTU over the last 30 years.
Event Date: 13/6/2023
Speaker: Prof. CHAN Siew Hwa (Nanyang Technological University)
Hosted by: PolyU Academy for Interdisciplinary Research
- Subjects:
- Electrical Engineering
- Keywords:
- Clean energy Hydrogen as fuel
- Resource Type:
- Video
-
Video
Dr Wang Yulun has been actively working at the forefront of the surgical robotics and telemedicine industries for the past 30 years. During this lecture, he will describe the evolution of these technologies and marketplaces and offer insights into how they will continue transforming healthcare delivery.
Event Date: 10/1/2023
Speaker: Dr Wang Yulun (Teladoc Health)
Hosted by: PolyU Academy for Interdisciplinary Research
- Keywords:
- Medical care -- Automation Robotics in medicine
- Resource Type:
- Video
-
Others
In the Federal Aviation Administration(FAA), Human Factors is defined as a“multidisciplinary effort to generate and compile information about human capabilities and limitations and apply that information to equipment, systems,facilities, procedures, jobs, environments, training, staffing, and personnel management for safe,comfortable, and effective human performance” (FAA Order 9550.8A). FAA human factors researchers seek to understand the physical, behavioral, cognitive, and social characteristics of aviation professionals—such as pilots, air traffic controllers,technical operations specialists, and aircraft maintenance technicians—and the systems that they use.
- Course related:
- AAE4903 Human Factors in Aviation
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Aeronautics -- Safety measures United States. Federal Aviation Administration Aeronautics -- Human factors
- Resource Type:
- Others
-
Others
CSI produces five primary software packages: SAP2000, CSiBridge, ETABS, SAFE, and PERFORM-3D.
Each of these programs offers unique capabilities and tools that are tailored to different types of structures and problems, allowing users to find just the right solution for their work. SAP2000 is intended for use on civil structures such as dams, communication towers, stadiums, industrial plants and buildings. CSiBridge offers powerful parametric design of concrete and steel bridges. ETABS has been developed specifically for multi-story commercial and residential building structures, such as office towers, apartments and hospitals. The SAFE System provides an efficient and powerful program for the analysis and design of concrete slabs and foundations, with or without post-tensioning. PERFORM-3D is a highly focused nonlinear tool offering powerful performance based design capabilities.
With its uniquely qualified staff of professional structural engineers, researchers, academicians, and its worldwide involvement in the structural engineering community, CSI has been at the forefront of structural software development for nearly four decades. With CSI products you can be confident that you have the finest structural engineering software available, backed by a company with an unmatched record of innovation, and an unrivaled commitment to meet the ever-evolving needs of the profession.
- Course related:
- CSE48405 Design Project For Structural and Fire Engineers
- Keywords:
- Structural design Architectural design Building -- Data processing Computer-aided design
- Resource Type:
- Others