Search Constraints
Number of results to display per page
Results for:
Search Results
-
Video
This video discusses the technical aspects to consider when designing an airport runway.
- Subjects:
- Aeronautical and Aviation Engineering and Transportation
- Keywords:
- Airports Runways (Aeronautics) -- Design construction Aeronautics Commercial
- Resource Type:
- Video
-
e-book
DOAB provides a searchable index to the information about these books, with links to the full texts of the publications at the publisher’s website or repository.
- Subjects:
- Environmental Sciences
- Keywords:
- Geography Climatology Ecology Meteorology Earth sciences Oceanography Environmental sciences Geology
- Resource Type:
- e-book
-
Video
While steel reinforcement solves one of concrete’s greatest limitations, it creates an entirely new problem: Corrosion of embedded steel rebar is the most common form of concrete deterioration. There are lots of ways to combat this problem, a few of which we discuss/demonstrate in this video, including fiber reinforced concrete, adequate protective cover, and fiber reinforced polymer bars.
- Subjects:
- Building and Real Estate
- Keywords:
- Protective coatings Reinforced concrete -- Corrosion -- Prevention Reinforcing bars -- Corrosion Fiber-reinforced concrete
- Resource Type:
- Video
-
e-book
In dredging, production estimating is carried out mainly with analytical physical models of the different dredging processes.Slurry transport of settling slurries and cutting processes in sand, clay and rock are already covered in two other books by the author.Other processes like hopper sedimentation and erosion, water jet fluidization, cutter head spillage, pump/pipeline dynamics and clamshell dredging are covered in this Special Topics Edition.New topics may be added in the near future
-
Courseware
The course gives the technological backgrounds of treatment processes applied for production of drinking water. The treatment processes are demonstrated with laboratory experiments. Study goals: Knowledge of technological basics and design parameters of drinking water treatment processes.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water -- Purification Drinking water -- Purification
- Resource Type:
- Courseware
-
Courseware
This course deals with the design of drinking water treatment plants. Theory is discussed and a design exercise is made. Study goals: Understanding of design aspects and design details.
- Subjects:
- Environmental Engineering and Hydraulic Engineering
- Keywords:
- Water -- Purification Water treatment plants -- Design construction Drinking water -- Purification
- Resource Type:
- Courseware
-
Courseware
We will discuss sciences and societal consequences of air pollution problems such as 1. Photochemical smog 2. Atmospheric particle pollution 3. Indoor pollution 4. Acid rain 5. And human triggered climate change.Essential concepts of chemistry, physics, meteorology and mathematics will be introduced. The consequences of air pollution will be discussed in historical and international perspectives. The main educational goal is raising critical thinking skills for the students to develop their own opinions future environmental issues
- Subjects:
- Environmental Engineering
- Keywords:
- Air -- Pollution
- Resource Type:
- Courseware
-
MOOC
Too often modern cities and suburbs are disorganized places where most new development makes daily life less pleasant, creates more traffic congestion, and contributes to climate change. This trend has to change; and our course is going to show you how. Ecodesign means integrating planning, urban design and the conservation of natural systems to produce a sustainable built and natural environment. Ecodesign can be implemented through normal business practices and the kinds of capital programs and regulations already in use in most communities. We will show you how ecodesign has already been used for exceptional projects in many cities and suburbs—from Hammarby Sjöstad in Stockholm to False Creek North in Vancouver to Battery Park City in Manhattan, as well as many smaller-scale examples that can be adopted in any community. Cities and suburbs built according to ecodesign principles can and should become normal, instead of just a few special examples, transforming urban development into desirable, lower-carbon, compact and walkable communities and business centers. As this course describes specific solutions to the vexing urban challenges we all face, course participants can see how these ideas might be applied in their own area. Participants will learn the conceptual framework of ecodesign, see many real, successful examples, and come to understand the tools, processes, and techniques for policy development and implementation. Ecodesign thinking is relevant to anyone who has a part in shaping or influencing the future of cities and suburbs – citizens, students, designers, public officials, and politicians. At the conclusion of the course participants will have the tools and strategies necessary to advocate policies and projects for a neighbourhood or urban district using the ecodesign framework.
- Subjects:
- Environmental Engineering, Building Services Engineering, and Building and Real Estate
- Keywords:
- Cities towns -- Growth City planning -- Environmental aspects Regional planning
- Resource Type:
- MOOC
-
Courseware
This course teaches the principles and analysis of electromechanical systems. Students will develop analytical techniques for predicting device and system interaction characteristics as well as learn to design major classes of electric machines. Problems used in the course are intended to strengthen understanding of the phenomena and interactions in electromechanics, and include examples from current research.
- Subjects:
- Building Services Engineering and Electrical Engineering
- Keywords:
- Electric machines Electric machinery
- Resource Type:
- Courseware
-
MOOC
Electric powertrains are estimated to propel a large part of road vehicles in the future, due to their high efficiency and zero tailpipe emissions. But, the cost and weight of batteries and the time to charge them are arguments for the conventional powertrain in many vehicles. This makes it important for engineers working with vehicles to understand how both these powertrains work, and how to determine their performance and energy consumption for different type of vehicles and different ways of driving vehicles. This course is aimed at learners with a bachelor's degree or engineers in the automotive industry who need to develop their knowledge about electric powertrains. In this course, you will learn how electric and conventional combustion engine powertrains are built and how they work. You will learn methods to calculate their performance and energy consumption and how to simulate them in different driving cycles. You will also learn about the basic function, the main limits and the losses of: Combustion engines, Transmissions Electric machines, Power electronics Batteries. This knowledge will also be a base for understanding and analysing different types of hybrid vehicles, discussed in the course, Hybrid Vehicles. As a result of support from MathWorks, students will be granted access to MATLAB/Simulink for the duration of the course.
- Subjects:
- Electrical Engineering, Mechanical Engineering, and Transportation
- Keywords:
- Electric vehicles Automobiles -- Power trains
- Resource Type:
- MOOC
-
MOOC
This course was recorded in 2021 by Dr Nick Barton, an ISRM Fellow and recipient of the 2011 Müller Award of the ISRM. In this course, it includes some examples of empirical methods in rock mechanics and rock engineering: for tunnelling, rock joints, rock masses, and rock slopes, cliffs and mountains (Q, QTBM, JRC, JCS, QSLOPE and other topics) The course has four parts, each opening in its own page.
Part 1 - The many faces of Q
Part 2 - Shear Strength of Rock, Rock Joints, etc.
Part 3 - Failure Modes in Rock Masses
Part 4 - TBM Performance and Prognosis
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Engineering geology
- Resource Type:
- MOOC
-
MOOC
Humanity faces an immense challenge: providing abundant energy to everyone without wrecking the planet. If we want a high-energy future while protecting the natural world for our children, we must consider the environmental consequences of energy production and use. But money matters too: energy solutions that ignore economic costs are not realistic, particularly in a world where billions of people currently can’t afford access to basic energy services. How can we proceed? Energy Within Environmental Constraints won’t give you the answer. Instead, we will teach you how to ask the right questions and estimate the consequences of different choices. This course is rich in details of real devices and light on theory. You won’t find any electrodynamics here, but you will find enough about modern commercial solar panels to estimate if they would be profitable to install in a given location. We emphasizes costs: the cascade of capital and operating costs from energy extraction all the way through end uses. We also emphasize quantitative comparisons and tradeoffs: how much more expensive is electricity from solar panels than from coal plants, and how much pollution does it prevent? Is solar power as cost-effective an environmental investment as nuclear power or energy efficiency? And how do we include considerations other than cost? This course is intended for a diverse audience. Whether you are a student, an activist, a policymaker, a business owner, or a concerned citizen, this course will help you start to think carefully about our current energy system and how we can improve its environmental performance.
- Subjects:
- Environmental Engineering, Building Services Engineering, and Building and Real Estate
- Keywords:
- Environmental protection Environmental management Renewable energy sources Power resources
- Resource Type:
- MOOC
-
Courseware
Products and equipment all around us are made of materials: look around you and you will see phones, computers, cars, and buildings. We face challenges in securing the supply of materials and the impact this has on the planet. Innovative product design can help us find solutions to these challenges. This course will explore new ways of designing products. The design of products is an important aspect of a circular economy. The circular economy approach addresses material supply challenges by keeping materials in use much longer and eventually returning materials for new use. The principle is that waste must be minimized. Products will be designed to last longer. They will be easier to Reuse, Repair, and Remanufacture. The product will eventually be broken down and Recycled. This is Design for R and is the focus of this course. Experts from leading European universities and research organizations will explain the latest strategies in product design. Current design approaches lead to waste, loss of value and loss of resources. You will learn about the innovative ways in which companies are creating value, whilst securing their supply chains, by integrating Design for R. This course is suitable for all learners who have an interest in product design, innovative engineering, new business activity, entrepreneurship, sustainability, circular economy and everyone who thinks that the current way we do things today needs a radical rethink.
- Subjects:
- Environmental Engineering
- Keywords:
- Engineering design Industrial management -- Environmental aspects Sustainable design Remanufacturing
- Resource Type:
- Courseware
-
Video
Engineering Mathematics tutorial series covers aspects of applied mathematics including: multivariable calculus; vector field theory; differential equations; Laplace transforms and Fourier series.
- Subjects:
- Mathematics and Statistics
- Keywords:
- Engineering mathematics
- Resource Type:
- Video
-
Courseware
If you’re interested in the concept of building with nature, then this is the engineering course for you. This course explores the use of natural materials and ecological processes in achieving effective and sustainable hydraulic infrastructural designs. You will learn the Building with Nature ecosystem-based design concept and its applications in water and coastal systems. During the course, you will be presented with a range of case studies to deepen your knowledge of ecological and engineering principles. You’ll learn from leading Dutch engineers and environmental scientists who see the Building with Nature integrated design approach as fundamental to a new generation of engineers and ecologists. Join us in exploring the interface between hydraulic engineering, nature and society.
- Subjects:
- Building Services Engineering and Hydraulic Engineering
- Keywords:
- Sustainable development Hydraulic engineering Water resources development -- Environmental aspects
- Resource Type:
- Courseware
-
Courseware
This course focuses on the thermal, luminous, and acoustic behavior of buildings, examining the basic scientific principles underlying these phenomena and introducing students to technologies and analysis techniques for designing comfortable indoor environments. Students are challenged to apply these techniques and explore the role light, energy, and sound can play in shaping architecture.
- Subjects:
- Environmental Engineering and Building Services Engineering
- Keywords:
- Buildings -- Environmental engineering Sustainable buildings -- Design construction
- Resource Type:
- Courseware
-
e-book
Essentials of Geographic Information Systems integrates key concepts behind the technology with practical concerns and real-world applications. Recognizing that many potential GIS users are nonspecialists or may only need a few maps, this book is designed to be accessible, pragmatic, and concise. Essentials of Geographic Information Systems also illustrates how GIS is used to ask questions, inform choices, and guide policy. From the melting of the polar ice caps to privacy issues associated with mapping, this book provides a gentle, yet substantive, introduction to the use and application of digital maps, mapping, and GIS.
In today's world, learning involves knowing how and where to search for information. In some respects, knowing where to look for answers and information is arguably just as important as the knowledge itself. Because Essentials of Geographic Information Systems is concise, focused, and directed, readers are encouraged to search for supplementary information and to follow up on specific topics of interest on their own when necessary. Essentials of Geographic Information Systems provides the foundations for learning GIS, but readers are encouraged to construct their own individual frameworks of GIS knowledge. The benefits of this approach are two-fold. First, it promotes active learning through research. Second, it facilitates flexible and selective learning—that is, what is learned is a function of individual needs and interest.
Since GIS and related geospatial and navigation technology change so rapidly, a flexible and dynamic text is necessary in order to stay current and relevant. Though essential concepts in GIS tend to remain constant, the situations, applications, and examples of GIS are fluid and dynamic. Though this book is intended for use in introductory GIS courses, Essentials of Geographic Information Systems will also appeal to the large number of certificate, professional, extension, and online programs in GIS that are available today. In addition to providing readers with the tools necessary to carry out spatial analyses, Essentials of Geographic Information Systems outlines valuable cartographic guidelines for maximizing the visual impact of your maps. The book also describes effective GIS project management solutions that commonly arise in the modern workplace.
- Subjects:
- Land Surveying and Geo-Informatics and Computing
- Keywords:
- Geographic information systems Textbooks
- Resource Type:
- e-book
-
e-journal
Estonian Academy Publishers issues seven open access scientific journals, peer-reviewed, indexed and abstracted in international review publications and databases. All journals have an international Editorial board. Publications of the Estonian Academy Publishers cover almost all important areas of contemporary science. Our journals are peer reviewed and recognized by the Estonian Research Council and the Estonian Committee of Science Compentence as journals meeting international scientific standards.
- Subjects:
- Environmental Sciences, Physics, Chemistry, Archeology, Mathematics and Statistics, Biology, and Foreign Language Learning
- Keywords:
- Science Periodicals Uralic languages Ecology Mathematics Archaeology Technology Chemistry Social sciences Europe -- Baltic Sea Region Engineering Humanities Geology History Physics
- Resource Type:
- e-journal
-
Video
Planet Earth is this solid thing you are standing on right now. In your everyday life you don't really waste a thought about how amazing this is. A giant, ancient, hot rock. How did it come into existence and how big is it really? You will be surprised. The ground you are standing on is just a very, very small part of the big picture.
- Course related:
- LSGI1D03 Living on a Dynamic Earth
- Subjects:
- Environmental Sciences
- Keywords:
- Earth sciences
- Resource Type:
- Video
-
Courseware
This course focuses on the use of remotely sensed imagery and elevation data in GIS applications. Students enrolling in this course should have a solid conceptual foundation in geospatial information science and technology. The course is appropriate for those who are already working in the geospatial profession and wish to use imagery and elevation data in visualization and spatial analysis.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Geographic information systems Image processing -- Digital techniques
- Resource Type:
- Courseware
-
e-book
Fabricate 2020 is the fourth title in the FABRICATE series on the theme of digital fabrication and published in conjunction with a triennial conference (London, April 2020). The book features cutting-edge built projects and work-in-progress from both academia and practice. It brings together pioneers in design and making from across the fields of architecture, construction, engineering, manufacturing, materials technology and computation. Fabricate 2020 includes 32 illustrated articles punctuated by four conversations between world-leading experts from design to engineering, discussing themes such as drawing-to-production, behavioural composites, robotic assembly, and digital craft.
- Subjects:
- Building and Real Estate
- Keywords:
- Architecture -- Computer-aided design Architecture -- Data processing Architecture Modern
- Resource Type:
- e-book
-
Others
Discover the most effective way to improve your models.
- Subjects:
- Computing
- Keywords:
- Machine learning Data mining Python (Computer program language)
- Resource Type:
- Others
-
Others
Fire Dynamics Simulator (FDS) is a computational fluid dynamics (CFD) model of fire-driven fluid flow. The software solves numerically a form of the Navier-Stokes equations appropriate for low-speed, thermally-driven flow, with an emphasis on smoke and heat transport from fires. Smokeview (SMV) is a visualization program that is used to display the output of FDS and CFAST simulations.
- Course related:
- IC2180 Structural Engineering and Fire Safety
- Subjects:
- Building Services Engineering
- Keywords:
- Fires -- Computer programs Flame Smoke
- Resource Type:
- Others
-
Others
SimsUshare CTC™ is versatile training simulation software: a virtual incident command simulator, fire simulator, HazMat simulator, safety simulator, command training center, all rolled into one! Easily and rapidly create all-hazards training simulations using your own photos. Add realistic smoke, fire, and other effects to create an unlimited number of incidents. Connect your crews to run sims anywhere!
- Course related:
- IC2180 Structural Engineering and Fire Safety
- Subjects:
- Building Services Engineering
- Keywords:
- Fires -- Computer programs Flame Smoke
- Resource Type:
- Others
-
Courseware
The course “Fluid Flow, Heat and Mass Transfer,” course number ta3220, is third-year BSc course in the program of Applied Earth Sciences at Delft University of Technology. Students in this class have already taken a course in “Transport Phenomena” in the second year, and “Fluid Flow Heat and Mass Transfer” is designed as a follow-up to that class, with an emphasis on topics of importance in applied earth sciences, and in particular to Petroleum Engineering, groundwater flow and mining. In practice, however I start over again with first principles with this class, because the initial concepts of the shell balance are difficult for students to grasp and can always use a second time through. The course covers simple fluid mechanics problems (rectilinear flow) using shell balances, for Newtonian and power-law fluids and Bingham plastics. Turbulence for Newtonian fluids is covered in the context of friction factors for flow in pipes, flow around spheres and flow in packed beds. In heat transfer we start again with shell balances for solving simple steady-state conduction problems. Thereafter, special attention is given to unsteady and multidimensional heat conduction, since the equations are similar for unsteady flow in aquifers and petroleum reservoirs. The concepts of orthogonal conduction and superposition are emphasized, as well as ways to treat perfectly insulated boundaries. The final topic in heat transfer is estimation of heat-transfer coefficients in flow in tubes. Although no other geometries are treated explicitly, I hope students recognize certain principles they can apply to other situations. We cover mass transfer only lightly, and only as by analogy to heat conduction: unsteady diffusion (by analogy to unsteady head conduction) and mass transfer in tubes (by analogy to heat transfer in tubes).
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Heat -- Transmission Mass transfer Fluid mechanics
- Resource Type:
- Courseware
-
Courseware
What do collapsed buildings, infected hospital patients, and crashed airplanes have in common? If you know the causes of these events and conditions, they can all be prevented. In this course, you will learn how to use the TU Delft mind-set to investigate the causes of such events so you can prevent them in the future. When, for instance, hundreds of hospital patients worldwide got infected after having gall bladder treatments, forensic engineering helped reveal how the design and use of the medical instruments could cause such widespread infections. As a result, changes were made to the instrument design and the procedural protocols in hospitals. Learning from failure in this case benefitted patient health and safety across the world. After taking this course you will have an understanding of failures and the investigation processes used to find their causes. You will learn how to apply lessons gained from investigating previous failures into new designs and procedures.
- Keywords:
- Forensic engineering Failure analysis (Engineering)
- Resource Type:
- Courseware
-
e-book
This is a forest measurements textbook written for field technicians. Silvicultural applications and illustrations are provided to demonstrate the relevance of the measurements. Special “technique tips” for each skill are intended to help increase data collection accuracy and confidence. These include how to avoid common pitfalls, effective short cuts and essentials for recording field data correctly. The emphasis is on elementary skills; it is not intended to be a timber cruising guide.
- Keywords:
- Textbooks Forests forestry -- Measurement
- Resource Type:
- e-book
-
e-book
The authors believe this free of charge book, Fundamentals of Infrastructure Management, will expand the impact of the material and help improve the practice of infrastructure management. By ‘free of charge,' we mean that the material can be freely obtained, but readers should devote time and effort to mastering the material. We have provided problem assignments for various chapters, and we strongly urge readers to undertake the problems as a learning experience. This book grew out of a decade of co-teaching a course entitled ‘Infrastructure Management' at Carnegie Mellon University. Our teaching philosophy was to prepare students for work in the field of infrastructure management. We believe that infrastructure management is a professional endeavor and an attractive professional career. The book is co-authored by two accomplished engineers - each representing professional practice, academic research and theoretical evaluation. Their collective strengths are presented throughout the text and serve to support both the practice of infrastructure management and a role for infrastructure management inquiry and search. Importantly, both co-authors have academic research interests (and a number of research publications) on various topics of infrastructure management. That said, the primary audience for this book is expected to be professionals intending to practice infrastructure management, and only secondarily individuals who intend to pursue a career of research in the area. The text draws examples and discusses a wide variety of infrastructure systems, including roadways, telecommunications, power generation, buildings and systems of infrastructure. We have found that some common fundamentals of asset management, analysis tools and informed decision-making are useful for a variety of such systems. Certainly, many infrastructure managers encounter a variety of infrastructure types during their professional careers. Moreover, due to the functional inter-dependencies of different infrastructure systems, it is certainly advantageous for managers of one infrastructure type to understand other types of infrastructure. For example, roadway managers rely upon the power grid for traffic signal operation.
- Keywords:
- Infrastructure (Economics) -- Management Engineering -- Management Textbooks
- Resource Type:
- e-book
-
Courseware
Fundamentals of photoelectric conversion: charge excitation, conduction, separation, and collection. Lectures cover commercial and emerging photovoltaic technologies and cross-cutting themes, including conversion efficiencies, loss mechanisms, characterization, manufacturing, systems, reliability, life-cycle analysis, risk analysis, and technology evolution in the context of markets, policies, society, and environment.
- Subjects:
- Environmental Engineering and Building Services Engineering
- Keywords:
- Photovoltaic cells Photovoltaic power systems Photovoltaic power generation
- Resource Type:
- Courseware
-
MOOC
Understanding a city as a whole, its people, components, functions, scales and dynamics, is crucial for the appropriate design and management of the urban system. While the development of cities in different parts of the world is moving in diverse directions, all estimations show that cities worldwide will change and grow strongly in the coming years. Especially in the tropics over the next 3 decades, it is expected that the number of new urban residents will increase by 3 times the population of Europe today. Yet already now, there is an extreme shortage of designers and urban planners able to understand the functioning of a city as a system, and to plan a sustainable and resilient city. To answer questions like: Which methods can contribute to the sustainable performance of a city, and how can we teach this to the next generations, the ETH Future Cities Laboratory in Singapore has produced over the last 3 years many necessary research results. “Future Cities” aims to bring these latest results to the places where they are needed most. The only way to better understand the city is by going beyond the physical appearance and by focusing on different representations, properties and impact factors of the urban system. For that reason, in this course we will explore the city as the most complex human-made “organism” with a metabolism that can be modeled in terms of stocks and flows. We will open a holistic view on existing and new cities, with a focus on Asia. Data-driven approaches for the development of the future city will be studied, based on crowdsourcing and sensing. At first, we will give an overview of the components and dynamics of the future cities, and we will show the importance of information and information architecture for the cities of the future. The course will cover the origins, state-of-the-art and applications of information architecture and simulation. “Future Cities” will provide the basis to understand, shape, plan, design, build, manage and continually adapt a city. You will learn to see the consequences of citizen science and the merging of Architecture and information space. You will be up-to-date on the latest research and development on how to better understand, create and manage the future cities for a more resilient urban world.
- Subjects:
- Building Services Engineering and Building and Real Estate
- Keywords:
- Smart cities Cities towns -- Effect of technological innovations on City planning
- Resource Type:
- MOOC
-
Video
This lecture gives an intuitive explanation of economics concept known as "Nash equilibrium" using traffic signals as an example.
- Course related:
- AMA1D04 Understanding Social Conflicts by Game Theory
- Subjects:
- Economics and Transportation
- Keywords:
- Game theory Traffic signs signals Traffic engineering Equilibrium (Economics)
- Resource Type:
- Video
-
Courseware
Geo-information has proven to be extremely helpful in many aspects of risk and disaster management: locational and situational awareness, monitoring of hazards, damage detection, sharing of information, defining vulnerability areas, etc. This course aims to provide knowledge on risk and disaster management activities, demonstrate use of geo-information technologies in emergency response, outline current challenges and motivate young geo-specialist to seek for advanced solutions.
-
Others
GeoPandas is an open source project to make working with geospatial data in python easier. GeoPandas extends the datatypes used by pandas to allow spatial operations on geometric types. Geometric operations are performed by shapely. Geopandas further depends on fiona for file access and matplotlib for plottin
- Subjects:
- Land Surveying and Geo-Informatics and Computing
- Keywords:
- Geospatial data -- Data processing Python (Computer program language)
- Resource Type:
- Others
-
Courseware
In this data rich world, we need to understand how things are organized on the Earth's surface. Those things are represented by spatial data and necessarily depend upon what surrounds them. Spatial statistics provide insights into explaining processes that create patterns in spatial data. In geographical information analysis, spatial statistics such as point pattern analysis, spatial autocorrelation, and spatial interpolation will analyze the spatial patterns, spatial processes, and spatial association that characterize spatial data. Understanding spatial analysis will help you realize what makes spatial data special and why spatial analysis reveals a truth about spatial data.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Spatial analysis (Statistics) Geographic information systems
- Resource Type:
- Courseware
-
e-book
"Essentials of Geographic Information Systems integrates key concepts behind the technology with practical concerns and real-world applications. Recognizing that many potential GIS users are nonspecialists or may only need a few maps, this book is designed to be accessible, pragmatic, and concise. Essentials of Geographic Information Systems also illustrates how GIS is used to ask questions, inform choices, and guide policy. From the melting of the polar ice caps to privacy issues associated with mapping, this book provides a gentle, yet substantive, introduction to the use and application of digital maps, mapping, and GIS."--BCcampus website.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Textbooks Geographic information systems
- Resource Type:
- e-book
-
Others
GeoInfo Map is a geospatial information service provided by the Hong Kong Special Administrative Region (HKSAR) Government to the general public, dedicated to facilitate the searching and understanding of geographical locations, the built and natural environments, and public facilities in Hong Kong. In GeoInfo Map, base map details and building information as well as the photo maps are provided by the Lands Department. Departmental and public facilities information is contributed by relevant Government departments while infrastructure and hosting of this website is provided by the Office of Government Chief Information Officer. Geospatial information underpins our daily activities. To cater public’s needs for convenient access to official digital map and geospatial information, LandsD developed this GeoInfo Map service for use by members of the general public. GeoInfo Map served as a common platform to foster sharing of geospatial information by enabling easy public access to the latest facility information released by government departments. Since the launch of the GeoInfo Map in May 2010, the LandsD has been working closely with 29 government departments for the delivery of up-to-date maps and geospatial information service for the public. Over the years, the content of the GeoInfo Map has enriched significantly from provision of 120 types of public facility geospatial information to 270. In order to enhance service quality, the Lands Department has recently conducted a large scale revamping exercise to improve the GeoInfo Map service. To facilitate web surfing with tablet computers and smartphones, responsive web design has been introduced in the revamped website which will detect and adapt to the device in use to deliver a smoother user experience. Apart from enhancing map browsing experience and performance, the new map interface enables users to search for various types of real-time information including weather, traffic, air and beach water quality. GeoInfo Map provides a powerful geographic search engine. It allows users to find any locations in Hong Kong by inputting address information, building names, community and public facility names, place names, road names, lot information, lamp post numbers, and GPS coordinates, etc. Users can also search for public facilities by different categories such as "Sports and Recreation", "Health", etc. GeoInfo Map also provides useful map tools such as drawing tools, share map tools, and drawing tools, etc. Using GeoInfo Map, users can use the navigation tool bar provided to view maps with different scales and level of details, and pan and zoom to any locations in Hong Kong. Apart from the topographic maps, users can have aerial views over the locations of Hong Kong with the Ortho Map function. LandsD is delighted to offer GeoInfo Map to the public. With integrated and comprehensive geospatial information, we hope the GeoInfo Map provides convenience and support to the general public. We would continuously improve the GeoInfo Map service quality. More geospatial information will be incorporated into GeoInfo Map in the future.
- Course related:
- LSGI3781 Engineering Surveying
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Maps China -- Hong Kong Geographic information systems
- Resource Type:
- Others
-
Video
The ISRM is extremely grateful to Dr. John Franklin for preparing this series of videos on Geological Engineering.
- Subjects:
- Land Surveying and Geo-Informatics
- Keywords:
- Geotechnical engineering Engineering geology
- Resource Type:
- Video
-
Courseware
The Geology 1 course is composed of three parts dedicated to 1. general knowledge of the system Earth, 2. tools for the 3D geometric representation of geological objects and 3. methods and techniques for the recognition of fundamental minerals and rocks.
- Subjects:
- Environmental Sciences and Land Surveying and Geo-Informatics
- Keywords:
- Rock mechanics Minerals Earth sciences Geology
- Resource Type:
- Courseware
-
Courseware
Are you fascinated by Geosciences and willing to take the challenge of predicting the nature and behavior of the Earth subsurface? This is your course! In a voyage through the Earth, Geoscience: the Earth and its Resources will explore the Earth interior and the processes forming mountains and sedimentary basins. You will understand how the sediments are formed, transported, deposited and deformed. You will develop knowledge on the behavior of petroleum and water resources. The course has an innovative approach focusing on key fundamental processes, exploring their nature and quantitative interactions. It will be shown how this acquired knowledge is used to predict the nature and behavior of the Earth subsurface. This is your ideal first step as a future Geoscientists or professional to upgrade your knowledge in the domain of Earth Sciences.
- Subjects:
- Environmental Sciences and Land Surveying and Geo-Informatics
- Keywords:
- Plate tectonics Earth sciences Petroleum -- Geology Geology Hydrology
- Resource Type:
- Courseware
-
Others
Create interactive maps, and discover patterns in geospatial data.
- Subjects:
- Land Surveying and Geo-Informatics and Computing
- Keywords:
- Geospatial data Python (Computer program language)
- Resource Type:
- Others
-
Courseware
This class is designed to expose you to the cycles of disasters, the roots of emergency planning in the U.S., how to understand and map vulnerabilities, and expose you to the disaster planning in different contexts, including in developing countries.
- Subjects:
- Disaster Control and Management
- Keywords:
- Hazard mitigation Emergency management Disaster relief
- Resource Type:
- Courseware
-
Courseware
This course provides students with a scientific foundation of anthropogenic climate change and an introduction to climate models. It focuses on fundamental physical processes that shape climate (e.g. solar variability, orbital mechanics, greenhouse gases, atmospheric and oceanic circulation, and volcanic and soil aerosols) and on evidence for past and present climate change. During the course they discuss material consequences of climate change, including sea level change, variations in precipitation, vegetation, storminess, and the incidence of disease. This course also examines the science behind mitigation and adaptation proposals.
- Subjects:
- Environmental Engineering
- Keywords:
- Global temperature changes Climatic changes Global warming
- Resource Type:
- Courseware
-
Others
Hong Kong e-Legislation (HKeL) is the official database of Hong Kong legislation. It provides free online access to current and past versions of consolidated legislation dating back to 30 June 1997 and PDF copies marked “verified copy” have official legal status. Different searching and viewing modes are available to facilitate access to law. The database is maintained by the Department of Justice.
- Course related:
- BRE336 Development Control Law
- Subjects:
- Building Services Engineering, Land Surveying and Geo-Informatics, and Building and Real Estate
- Keywords:
- Building laws China -- Hong Kong
- Resource Type:
- Others
-
Courseware
The Hong Kong Jockey Club Disaster Preparedness and Response Institute E-Learning Platform.
- Course related:
- LSGI1B02 Climate Change and Society
- Subjects:
- Disaster Control and Management
- Keywords:
- Disasters -- Social aspects Disaster relief -- Psychological aspects Emergency management
- Resource Type:
- Courseware
-
Video
Sinkholes form through both natural and human-made processes. Most of us think about erosion on the surface of the earth, but erosion can occur in the subsurface as well. In fact, scientist and engineers have a very creative name for just such a process: internal erosion. If just the right factors come together in the subsurface, some very interesting things can occur, including sinkholes.
- Subjects:
- Geotechnical Engineering
- Keywords:
- Sinkholes Soil erosion
- Resource Type:
- Video
-
Video
We normally build a dam to hold water back and store it for use in water supply, irrigation, hydropower, or flood control. But sometimes we have to let some water go. Whether we need it downstream or the impounded water behind the dam is simply too full to store any more, nearly every dam needs a spillway to safely discharge water. The spillway is a critical part of any dam and often the most complex component. So how does it work?
- Subjects:
- Hydraulic Engineering
- Keywords:
- Hydraulic structures Spillways Dams Reservoirs Diversion structures (Hydraulic engineering)
- Resource Type:
- Video
-
Video
Untangling the various equipment you might see in an electrical substation. In many ways, the grid is a one-size-fits-all system - a gigantic machine to which we all connect spinning in perfect synchrony across, in some cases, an entire continent. On the other hand, our electricity needs, including when we need it, how much we need, and how reliably it should be delivered vary widely. Substations play a critical role in controlling and protecting the power grid.
- Subjects:
- Building Services Engineering and Electrical Engineering
- Keywords:
- Electric power distribution Electric substations
- Resource Type:
- Video
-
Video
Traffic management in dense urban areas is an extremely complex problem with a host of conflicting goals and challenges. One of the most fundamental of those challenges happens at an intersection, where multiple streams of traffic - including vehicles, bikes and pedestrians - need to safely, and with any luck, efficiently, cross each others’ paths. However we accommodate it now or in future, traffic will continue to be one of the biggest challenges in our urban areas and traffic signals will continue to be one of its solutions.
- Subjects:
- Transportation
- Keywords:
- Traffic signs signals Roads -- Interchanges intersections Traffic flow
- Resource Type:
- Video
-
Video
How does a Drinking water treatment process work?, Drinking water treatment plant process animation: Here working of drinking treatment plants with detailed drinking water treatment processes and unit operations are discussed. Drinking water from the river, pond or local water bodies comes in drinking water treatment plants through various water treatment processes, like aeration, coagulation, filtration, and disinfection, etc. The aim of drinking water treatment is to produce and maintain water that is hygienically safe, aesthetically attractive and palatable in an economical manner. Thus, Before arriving at your tap, drinking water is treated in the drinking water treatment plant.
- Course related:
- CSE30641 Water and Wastewater Treatment Techniques
- Subjects:
- Environmental Engineering
- Keywords:
- Drinking water Water quality management Water treatment plants
- Resource Type:
- Video
-
Video
This video gives a quick description and demo of this ingenious pump. A hydraulic ram is a clever device invented over 200 years ago that can pump water uphill with no other external source of power except for the water flowing into it and there is a way to take advantage of this normally inauspicious effect for a beneficial use. The ram pump is an ingenious way to take advantage of the properties of fluids. We all need water for a variety of reasons, so being able to move it where we need it without any fancy equipment or external sources of power is a pretty nice tool to have in your toolbox.
- Subjects:
- Hydraulic Engineering
- Keywords:
- Hydraulic rams Pumping machinery
- Resource Type:
- Video