Search Constraints
Number of results to display per page
Results for:
Keywords
Textbooks
Remove constraint Keywords: Textbooks
Language
English
Remove constraint Language: English
Search Results
-
e-book
This book deals with an introduction to the flow of compressible substances (gases). The main difference between compressible flow and almost incompressible flow is not the fact that compressibility has to be considered. Rather, the difference is in two phenomena that do not exist in incompressible flow. The first phenomenon is the very sharp discontinuity (jump) in the flow in properties. The second phenomenon is the choking of the flow. Choking is when downstream variations don't effect the flow. Though choking occurs in certain pipe flows in astronomy, there also are situations of choking in general (external) flow.
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Fluid dynamics Gas dynamics Textbooks
- Resource Type:
- e-book
-
e-book
The topic of fluid mechanics is common to several disciplines: mechanical engineering, aerospace engineering, chemical engineering, and civil engineering. In fact, it is also related to disciplines like industrial engineering, and electrical engineering. While the emphasis is somewhat different in this book, the common material is presented and hopefully can be used by all. One can only admire the wonderful advances done by the previous geniuses who work in this field. In this book it is hoped to insert, what and when a certain model is suitable than other models. One of the difference in this book is the insertion of the introduction to multiphase flow. Clearly, multiphase is an advance topic. However, some minimal familiarity can be helpful for many engineers who have to deal with non pure single phase fluid. This book is the third book in the series of POTTO project books. POTTO project books are open content textbooks so everyone are welcome to joint in. The topic of fluid mechanics was chosen just to fill the introduction chapter to compressible flow. During the writing it became apparent that it should be a book in its own right. In writing the chapter on fluid statics, there was a realization that it is the best chapter written on this topic. It is hoped that the other chapters will be as good this one. This book is written in the spirit of my adviser and mentor E.R.G. Eckert. Eckert, aside from his research activity, wrote the book that brought a revolution in the education of the heat transfer. Up to Egret's book, the study of heat transfer was without any dimensional analysis. He wrote his book because he realized that the dimensional analysis utilized by him and his adviser (for the post doc), Ernst Schmidt, and their colleagues, must be taught in engineering classes. His book met strong criticism in which some called to "burn" his book. Today, however, there is no known place in world that does not teach according to Eckert's doctrine. It is assumed that the same kind of individual(s) who criticized Eckert's work will criticize this work. Indeed, the previous book, on compressible flow, met its opposition. For example, anonymous Wikipedia user name EMBaero claimed that the material in the book is plagiarizing, he just doesn't know from where and what. Maybe that was the reason that he felt that is okay to plagiarize the book on Wikipedia. These criticisms will not change the future or the success of the ideas in this work. As a wise person says "don't tell me that it is wrong, show me what is wrong"; this is the only reply. With all the above, it must be emphasized that this book is not expected to revolutionize the field but change some of the way things are taught. The book is organized into several chapters which, as a traditional textbook, deals with a basic introduction to the fluid properties and concepts (under construction). The second chapter deals with Thermodynamics. The third book chapter is a review of mechanics. The next topic is statics. When the Static Chapter was written, this author did not realize that so many new ideas will be inserted into this topic. As traditional texts in this field, ideal flow will be presented with the issue of added mass and added forces (under construction). The classic issue of turbulence (and stability) will be presented. An introduction to multi-phase flow, not a traditional topic, will be presented next (again under construction). The next two chapters will deal with open channel flow and gas dynamics. At this stage, dimensional analysis will be present (again under construction).
- Subjects:
- Aeronautical and Aviation Engineering and Mechanical Engineering
- Keywords:
- Fluid dynamics Textbooks
- Resource Type:
- e-book
-
e-book
Most books that use MATLAB are aimed at readers who know how to program. This book is for people who have never programmed before. As a result, the order of presentation is unusual. The book starts with scalar values and works up to vectors and matrices very gradually. This approach is good for beginning programmers, because it is hard to understand composite objects until you understand basic programming semantics. But there are problems: The MATLAB documentation is written in terms of matrices, and so are the error messages. To mitigate this problem, the book explains the necessary vocabulary early and deciphers some of the messages that beginners find confusing. Many of the examples in the first half of the book are non-standard MATLAB. I address this problem in the second half by translating the examples into a more idiomatic style. The book puts a lot of emphasis on functions, in part because they are an important tool for controlling program complexity, and also because they are useful for working with MATLAB tools like fzero and ode45. I assume that readers know calculus, differential equations, and physics, but not linear algebra. I explain the math as I go along, but the descriptions might not be enough for someone who hasn't seen the material before. There are small exercises within each chapter, and a few larger exercises at the end of some chapters.
-
e-book
How to Think Like a Computer Scientist: Learning with Pythonis an introduction to programming using Python.
- Subjects:
- Computing
- Keywords:
- Computer programming Programming languages (Electronic computers) Textbooks Python (Computer program language)
- Resource Type:
- e-book
-
e-book
Unlike some other textbooks, this one does not follow a top-down narrative. Rather it has the flow of a conversation, with backtracking. We will often build up programs incrementally, just as a pair of programmers would. We will include mistakes, not because I don't know the answer, but because this is the best way for you to learn. Including mistakes makes it impossible for you to read passively: you must instead engage with the material, because you can never be sure of the veracity of what you're reading. At the end, you'll always get to the right answer. However, this non-linear path is more frustrating in the short term (you will often be tempted to say, “Just tell me the answer, already!”), and it makes the book a poor reference guide (you can't open up to a random page and be sure what it says is correct). However, that feeling of frustration is the sensation of learning. I don't know of a way around it. At various points you will encounter this: ExerciseThis is an exercise. Do try it. This is a traditional textbook exercise. It's something you need to do on your own. If you're using this book as part of a course, this may very well have been assigned as homework. In contrast, you will also find exercise-like questions that look like this: Do Now!There's an activity here! Do you see it? When you get to one of these, stop. Read, think, and formulate an answer before you proceed. You must do this because this is actually an exercise, but the answer is already in the book—most often in the text immediately following (i.e., in the part you're reading right now)—or is something you can determine for yourself by running a program. If you just read on, you'll see the answer without having thought about it (or not see it at all, if the instructions are to run a program), so you will get to neither (a) test your knowledge, nor (b) improve your intuitions. In other words, these are additional, explicit attempts to encourage active learning. Ultimately, however, I can only encourage it; it's up to you to practice it. The main programming language used in this book is Racket. Like with all operating systems, however, Racket actually supports a host of programming languages, so you must tell Racket which language you're programming in. This textbook has been used in classes at: Brown University, Cal Poly, Columbus State University, Northeastern University, NYU, Reed College, UC-San Diego, UC-Santa Cruz, University of Rhode Island, University of Utah, Westmont College, Williams College, Worcester Polytechnic Institute.
- Subjects:
- Computing
- Keywords:
- Programming languages (Electronic computers) Textbooks
- Resource Type:
- e-book
-
e-book
We organize things, we organize information, we organize information about things, and we organize information about information. But even though “organizing” is a fundamental and ubiquitous challenge, when we compare these activities their contrasts are more apparent than their commonalities. We propose to unify many perspectives about organizing with the concept of an Organizing System, defined as an intentionally arranged collection of resources and the interactions they support. Every Organizing System involves a collection of resources, a choice of properties or principles used to describe and arrange resources, and ways of supporting interactions with resources. By comparing and contrasting how these activities take place in different contexts and domains, we can identify patterns of organizing. We can create a discipline of organizing in a disciplined way. The 4th edition builds a bridge between organizing and data science. It reframes descriptive statistics as organizing techniques, expands the treatment of classification to include computational methods, and incorporates many new examples of data-driven resource selection, organization, maintenance, and personalization. It introduces a new “data science” category of discipline-specific content, both in the chapter text and in endnotes, marked with [DS] in editions that contain endnotes.
- Subjects:
- Industrial and Systems Engineering
- Keywords:
- Metadata Information resources management Information organization Textbooks
- Resource Type:
- e-book
-
e-book
This book was created for an undergraduate Introduction to Industrial Engineering course at The University of Texas at Arlington (UTA). The chapters give an overview of the profession and an introduction to some of the tools used by industrial engineers in industry. There are interactive content exercises included at the end of most chapters. This interactive content aims to engage students in the content as they are reading. The book will continue to revised and updated with new information as it becomes necessary.
- Subjects:
- Industrial and Systems Engineering
- Keywords:
- Textbooks Industrial engineering
- Resource Type:
- e-book
-
e-book
Unmanned Aircraft Systems are an integral part of the US national critical infrastructure. The authors have endeavored to bring a breadth and quality of information to the reader that is unparalleled in the unclassified sphere. This textbook will fully immerse and engage the reader / student in the cyber-security considerations of this rapidly emerging technology that we know as unmanned aircraft systems (UAS). The first edition topics covered National Airspace (NAS) policy issues, information security (INFOSEC), UAS vulnerabilities in key systems (Sense and Avoid / SCADA), navigation and collision avoidance systems, stealth design, intelligence, surveillance and reconnaissance (ISR) platforms; weapons systems security; electronic warfare considerations; data-links, jamming, operational vulnerabilities and still-emerging political scenarios that affect US military / commercial decisions.
- Subjects:
- Computing
- Keywords:
- Drone aircraft Computer security Textbooks United States
- Resource Type:
- e-book
-
e-book
This is the story of a web-based information system rebuild. The system in question is www.teachengineering.org, a digital library of K-12 engineering curriculum that was built from the ground up with established technology and which for 13 years enjoyed lasting support from its growing user community and its sponsors. These 13 years, however, cover the period during which smart phones and tablets became commonplace, during which the Internet of Things started replacing the Semantic Web, during which NoSQL databases made their way out of the research labs and into everyday development shops, during which we collectively started moving IT functions and services into ‘the cloud,’ and during which computing performance doubled a few times, yet again. During this same period, TeachEngineering’s user base grew from a few hundred to more than 3 million users annually, its collection size quadrupled, it went through several user interface renewals, and significant functionality was added while having an exemplary service record, and it enjoyed continued financial support from its sponsors. In this monograph we provide a side-by-side of this rebuild. We lay out the choices made in the old architecture —we refer to it as TE 1.0— and compare and contrast them with the choices made for TE 2.0. We explain why both the 1.0 and 2.0 choices were made and discuss the advantages and disadvantages associated with them.
- Subjects:
- Computing
- Keywords:
- Web site development Web sites -- Design Textbooks
- Resource Type:
- e-book
-
e-book
Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
-
e-book
Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
- Subjects:
- Electronic and Information Engineering
- Keywords:
- Microwave devices Microwaves Radio circuits -- Design construction Textbooks
- Resource Type:
- e-book
-
e-book
Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
- Subjects:
- Electronic and Information Engineering
- Keywords:
- Microwave devices Microwaves Radio circuits -- Design construction Textbooks
- Resource Type:
- e-book
-
e-book
Microwave and RF Design: Transmission Lines builds on the concepts of forward- and backward-traveling waves. Many examples are included of advanced techniques for analyzing and designing transmission line networks with microstrip lines primarily used in design examples. Coupled-lines are an important functional element in microwave circuits, and circuit equivalents of coupled lines are introduced as fundamental building blocks in design. The text and examples introduce the often hidden design requirements of mitigating parasitic effects and eliminating unwanted modes of operation. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
- Subjects:
- Electronic and Information Engineering
- Keywords:
- Microwave transmission lines Radio circuits -- Design construction Textbooks Microwaves
- Resource Type:
- e-book
-
e-book
Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
- Subjects:
- Electronic and Information Engineering
- Keywords:
- Microwave devices -- Design Microwaves Radio circuits -- Design construction Textbooks
- Resource Type:
- e-book
-
e-book
Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming.
- Subjects:
- Electronic and Information Engineering
- Keywords:
- Microwave devices Microwaves Radio circuits -- Design construction Textbooks
- Resource Type:
- e-book
-
e-book
Electromagnetics, volume 2 by Steven W. Ellingson is a 216-page peer-reviewed open textbook designed especially for electrical engineering students in the third year of a bachelor of science degree program. It is intended as the primary textbook for the second semester of a two-semester undergraduate engineering electromagnetics sequence. The book addresses magnetic force and the Biot-Savart law; general and lossy media; parallel plate and rectangular waveguides; parallel wire, microstrip, and coaxial transmission lines; AC current flow and skin depth; reflection and transmission at planar boundaries; fields in parallel plate, parallel wire, and microstrip transmission lines; optical fiber; and radiation and antennas. To express your interest in this book or series, please visit http://bit.ly/vtpublishing-updates Additional resources Problem sets and the corresponding solution manuals; Slides of figures used in and created for the book; LaTeX sourcefiles; Errata for Volume 2; Collaborator portal for the Electromagnetics series; Faculty listserv for the Electromagnetics series. An accessible version will be available in January 2020. The Open Electromagnetics Project Led by Steven W. Ellingson at Virginia Tech, the goal of the Open Electromagnetics Project is to create no-cost openly-licensed content for courses in engineering electromagnetics. The project is motivated by two things: lowering learning material costs for students and giving faculty the freedom to adopt, modify, and improve their educational resources. Books in this Series Electromagnetics, Volume 1 https://doi.org/10.21061/electromagnetics-vol-1 Electromagnetics, Volume 2 https://doi.org/10.21061/electromagnetics-vol-2
- Subjects:
- Physics and Electrical Engineering
- Keywords:
- Electromagnetic theory Electromagnetism Textbooks
- Resource Type:
- e-book
-
e-book
This book provides an introduction to the discipline of aerospace structures and materials. It is the first book to date that includes all relevant aspects of this discipline within a single monologue. These aspects range from materials, manufacturing and processing techniques, to structures, design principles and structural performance, including aspects like durability and safety. With the purpose of introducing students into the basics of the entire discipline, the book presents the subjects broadly and loosely connected, adopting either a formal description or an informal walk around type of presentation. A key lessons conveyed within this book is the interplay between the exact science and engineering topics, like solid material physics and structural analysis, and the soft topics that are not easily captured by equations and formulas. Safety, manufacturability, availability and costing are some of these topics that are presented in this book to explain decisions and design solutions within this discipline.
- Subjects:
- Aeronautical and Aviation Engineering
- Keywords:
- Aerospace planes Aerospace engineering Textbooks
- Resource Type:
- e-book
-
e-book
This textbook provides an introduction to the important area of manufacturing processes. This text will explain the hows, whys, and whens of various machining operations, set-ups, and procedures. Throughout this text, you will learn how machine tools operate, and when to use one particular machine instead of another. It is organized for students who plan to enter the manufacturing technology field and for those who wish to develop the skills, techniques, and knowledge essential for advancement in this occupational cluster. The organization and contents of this text focus primarily on theory and practice. The machining processes and technology sections in this textbook cover such machine tools as surface grinders, bandsaws, drill presses, milling machines, and the engine lathe. Additionally, the importance of Computer Numerical Control (CNC) in the operation of the most machine tools is explained, and its role in automated manufacturing is explored thoroughly.
- Subjects:
- Industrial and Systems Engineering
- Keywords:
- Manufacturing processes Production engineering Textbooks
- Resource Type:
- e-book
-
e-book
Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.
- Subjects:
- Electrical Engineering and Mechanical Engineering
- Keywords:
- Direct energy conversion Textbooks
- Resource Type:
- e-book
-
e-book
This eBook was written as the sequel to the eBook titled DC Circuits, which was written in 2016 by Chad Davis. This eBook covers Alternating Current (AC) circuit theory as well as a brief introduction of electronics. It is broken up into seven modules. Module 1 covers the basic theory of AC signals. Since only DC sources are used in the first eBook, details of AC signals such as sinusoidal waveforms (or sine waves), square waves, and triangle waves are provided. Module 2, titled AC Circuits Math Background, covers the mathematics background needed for solving AC circuit problems. The background material in Modules 1 and 2 are combined in Module 3 to solve circuits with AC sources that include resistors, inductors, and capacitors (RLC circuits).
- Subjects:
- Electrical Engineering
- Keywords:
- Electric circuits -- Alternating current Textbooks
- Resource Type:
- e-book